1 <?xml version="1.0" encoding="UTF-8"?>
\r
2 <chapter xml:id="opensrf" xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="EN"
\r
3 xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:xlink="http://www.w3.org/1999/xlink">
\r
5 <title>OpenSRF</title>
\r
7 <abstract id="openSRF_abstract">
\r
8 <simpara>One of the claimed advantages of
\r
9 Evergreen over alternative integrated library systems is the underlying Open
\r
10 Service Request Framework (OpenSRF, pronounced "open surf") architecture. This
\r
11 article introduces OpenSRF, demonstrates how to build OpenSRF services through
\r
12 simple code examples, and explains the technical foundations on which OpenSRF
\r
13 is built. This chapter was taken from Dan Scott's <emphasis>Easing gently into OpenSRF</emphasis> article, June, 2010.</simpara>
\r
15 <section id="_introducing_opensrf">
\r
16 <title>Introducing OpenSRF</title>
\r
17 <indexterm><primary>OpenSRF</primary></indexterm>
\r
18 <simpara>OpenSRF is a message routing network that offers scalability and failover
\r
19 support for individual services and entire servers with minimal development and
\r
20 deployment overhead. You can use OpenSRF to build loosely-coupled applications
\r
21 that can be deployed on a single server or on clusters of geographically
\r
22 distributed servers using the same code and minimal configuration changes.
\r
23 Although copyright statements on some of the OpenSRF code date back to Mike
\r
24 Rylander’s original explorations in 2000, Evergreen was the first major
\r
25 application to be developed with, and to take full advantage of, the OpenSRF
\r
26 architecture starting in 2004. The first official release of OpenSRF was 0.1 in
\r
27 February 2005 (<ulink url="http://evergreen-ils.org/blog/?p=21">http://evergreen-ils.org/blog/?p=21</ulink>), but OpenSRF’s development
\r
28 continues a steady pace of enhancement and refinement, with the release of
\r
29 1.0.0 in October 2008 and the most recent release of 1.2.2 in February 2010.</simpara>
\r
30 <simpara>OpenSRF is a distinct break from the architectural approach used by previous
\r
31 library systems and has more in common with modern Web applications. The
\r
32 traditional "scale-up" approach to serve more transactions is to purchase a
\r
33 server with more CPUs and more RAM, possibly splitting the load between a Web
\r
34 server, a database server, and a business logic server. Evergreen, however, is
\r
35 built on the Open Service Request Framework (OpenSRF) architecture, which
\r
36 firmly embraces the "scale-out" approach of spreading transaction load over
\r
37 cheap commodity servers. The <ulink url="http://evergreen-ils.org/blog/?p=56">initial GPLS
\r
38 PINES hardware cluster</ulink>, while certainly impressive, may have offered the
\r
39 misleading impression that Evergreen requires a lot of hardware to run.
\r
40 However, Evergreen and OpenSRF easily scale down to a single server; many
\r
41 Evergreen libraries run their entire library system on a single server, and
\r
42 most OpenSRF and Evergreen development occurs on a virtual machine running on a
\r
43 single laptop or desktop image.</simpara>
\r
44 <simpara>Another common concern is that the flexibility of OpenSRF’s distributed
\r
45 architecture makes it complex to configure and to write new applications. This
\r
46 article demonstrates that OpenSRF itself is an extremely simple architecture on
\r
47 which one can easily build applications of many kinds – not just library
\r
48 applications – and that you can use a number of different languages to call and
\r
49 implement OpenSRF methods with a minimal learning curve. With an application
\r
50 built on OpenSRF, when you identify a bottleneck in your application’s business
\r
51 logic layer, you can adjust the number of the processes serving that particular
\r
52 bottleneck on each of your servers; or if the problem is that your service is
\r
53 resource-hungry, you could add an inexpensive server to your cluster and
\r
54 dedicate it to running that resource-hungry service.</simpara>
\r
55 <simplesect id="_programming_language_support">
\r
56 <title>Programming language support</title>
\r
57 <simpara>If you need to develop an entirely new OpenSRF service, you can choose from a
\r
58 number of different languages in which to implement that service. OpenSRF
\r
59 client language bindings have been written for C, Java, JavaScript, Perl, and
\r
60 Python, and service language bindings have been written for C, Perl, and Python.
\r
61 This article uses Perl examples as a lowest common denominator programming
\r
62 language. Writing an OpenSRF binding for another language is a relatively small
\r
63 task if that language offers libraries that support the core technologies on
\r
64 which OpenSRF depends:</simpara>
\r
68 <ulink url="http://tools.ietf.org/html/rfc3920">Extensible Messaging and Presence
\r
69 Protocol</ulink> (XMPP, sometimes referred to as Jabber) - provides the base messaging
\r
70 infrastructure between OpenSRF clients and services
\r
72 <indexterm><primary>XMPP</primary></indexterm>
\r
76 <ulink url="http://json.org">JavaScript Object Notation</ulink> (JSON) - serializes the content
\r
77 of each XMPP message in a standardized and concise format
\r
82 <ulink url="http://memcached.org">memcached</ulink> - provides the caching service
\r
84 <indexterm><primary>memcached</primary></indexterm>
\r
88 <ulink url="http://tools.ietf.org/html/rfc5424">syslog</ulink> - the standard UNIX logging
\r
91 <indexterm><primary>syslog</primary></indexterm>
\r
94 <simpara>Unfortunately, the
\r
95 <ulink url="http://evergreen-ils.org/dokuwiki/doku.php?id=osrf-devel:primer">OpenSRF
\r
96 reference documentation</ulink>, although augmented by the
\r
97 <ulink url="http://evergreen-ils.org/dokuwiki/doku.php?id=osrf-devel:terms">OpenSRF
\r
98 glossary</ulink>, blog posts like <ulink url="http://evergreen-ils.org/blog/?p=36">the description
\r
99 of OpenSRF and Jabber</ulink>, and even this article, is not a sufficient substitute
\r
100 for a complete specification on which one could implement a language binding.
\r
101 The recommended option for would-be developers of another language binding is
\r
102 to use the Python implementation as the cleanest basis for a port to another
\r
103 language.</simpara>
\r
104 <indexterm><primary>Python</primary></indexterm>
\r
107 <section id="writing_an_opensrf_service">
\r
108 <title>Writing an OpenSRF Service</title>
\r
109 <simpara>Imagine an application architecture in which 10 lines of Perl or Python, using
\r
110 the data types native to each language, are enough to implement a method that
\r
111 can then be deployed and invoked seamlessly across hundreds of servers. You
\r
112 have just imagined developing with OpenSRF – it is truly that simple. Under the
\r
113 covers, of course, the OpenSRF language bindings do an incredible amount of
\r
114 work on behalf of the developer. An OpenSRF application consists of one or more
\r
115 OpenSRF services that expose methods: for example, the <literal>opensrf.simple-text</literal>
\r
116 <ulink url="http://svn.open-ils.org/trac/OpenSRF/browser/trunk/src/perl/lib/OpenSRF/Application/Demo/SimpleText.pm">demonstration
\r
117 service</ulink> exposes the <literal>opensrf.simple-text.split()</literal> and
\r
118 <literal>opensrf.simple-text.reverse()</literal> methods. Each method accepts zero or more
\r
119 arguments and returns zero or one results. The data types supported by OpenSRF
\r
120 arguments and results are typical core language data types: strings, numbers,
\r
121 booleans, arrays, and hashes.</simpara>
\r
122 <simpara>To implement a new OpenSRF service, perform the following steps:</simpara>
\r
123 <orderedlist numeration="arabic">
\r
126 Include the base OpenSRF support libraries
\r
131 Write the code for each of your OpenSRF methods as separate procedures
\r
136 Register each method
\r
141 Add the service definition to the OpenSRF configuration files
\r
145 <simpara>For example, the following code implements an OpenSRF service. The service
\r
146 includes one method named <literal>opensrf.simple-text.reverse()</literal> that accepts one
\r
147 string as input and returns the reversed version of that string:</simpara>
\r
148 <programlisting language="perl" linenumbering="unnumbered">
\r
151 package OpenSRF::Application::Demo::SimpleText;
\r
155 use OpenSRF::Application;
\r
156 use parent qw/OpenSRF::Application/;
\r
159 my ($self , $conn, $text) = @_;
\r
160 my $reversed_text = scalar reverse($text);
\r
161 return $reversed_text;
\r
164 __PACKAGE__->register_method(
\r
165 method => 'text_reverse',
\r
166 api_name => 'opensrf.simple-text.reverse'
\r
169 <simpara>Ten lines of code, and we have a complete OpenSRF service that exposes a single
\r
170 method and could be deployed quickly on a cluster of servers to meet your
\r
171 application’s ravenous demand for reversed strings! If you’re unfamiliar with
\r
172 Perl, the <literal>use OpenSRF::Application; use parent qw/OpenSRF::Application/;</literal>
\r
173 lines tell this package to inherit methods and properties from the
\r
174 <literal>OpenSRF::Application</literal> module. For example, the call to
\r
175 <literal>__PACKAGE__->register_method()</literal> is defined in <literal>OpenSRF::Application</literal> but due to
\r
176 inheritance is available in this package (named by the special Perl symbol
\r
177 <literal>__PACKAGE__</literal> that contains the current package name). The <literal>register_method()</literal>
\r
178 procedure is how we introduce a method to the rest of the OpenSRF world.</simpara>
\r
179 <simplesect id="serviceRegistration">
\r
180 <title>Registering a service with the OpenSRF configuration files</title>
\r
181 <simpara>Two files control most of the configuration for OpenSRF:</simpara>
\r
185 <literal>opensrf.xml</literal> contains the configuration for the service itself, as well as
\r
186 a list of which application servers in your OpenSRF cluster should start
\r
192 <literal>opensrf_core.xml</literal> (often referred to as the "bootstrap configuration"
\r
193 file) contains the OpenSRF networking information, including the XMPP server
\r
194 connection credentials for the public and private routers. You only need to touch
\r
195 this for a new service if the new service needs to be accessible via the
\r
198 <indexterm><primary>configuration files</primary><secondary>opensrf_core.xml</secondary></indexterm>
\r
201 <simpara>Begin by defining the service itself in <literal>opensrf.xml</literal>. To register the
\r
202 <literal>opensrf.simple-text</literal> service, add the following section to the <literal><apps></literal>
\r
203 element (corresponding to the XPath <literal>/opensrf/default/apps/</literal>):</simpara>
\r
204 <indexterm><primary>configuration files</primary><secondary>opensrf.xml</secondary></indexterm>
\r
205 <programlisting language="xml" linenumbering="unnumbered">
\r
207 <opensrf.simple-text> <co id="CO1-1"/>
\r
208 <keepalive>3</keepalive><co id="CO1-2"/>
\r
209 <stateless>1</stateless><co id="CO1-3"/>
\r
210 <language>perl</language><co id="CO1-4"/>
\r
211 <implementation>OpenSRF::Application::Demo::SimpleText</implementation><co id="CO1-5"/>
\r
212 <max_requests>100</max_requests><co id="CO1-6"/>
\r
213 <unix_config>
\r
214 <max_requests>1000</max_requests> <co id="CO1-7"/>
\r
215 <unix_log>opensrf.simple-text_unix.log</unix_log> <co id="CO1-8"/>
\r
216 <unix_sock>opensrf.simple-text_unix.sock</unix_sock><co id="CO1-9"/>
\r
217 <unix_pid>opensrf.simple-text_unix.pid</unix_pid> <co id="CO1-10"/>
\r
218 <min_children>5</min_children> <co id="CO1-11"/>
\r
219 <max_children>15</max_children><co id="CO1-12"/>
\r
220 <min_spare_children>2</min_spare_children><co id="CO1-13"/>
\r
221 <max_spare_children>5</max_spare_children> <co id="CO1-14"/>
\r
222 </unix_config>
\r
223 </opensrf.simple-text>
\r
225 <!-- other OpenSRF services registered here... -->
\r
229 <callout arearefs="CO1-1">
\r
231 The element name is the name that the OpenSRF control scripts use to refer
\r
235 <callout arearefs="CO1-2">
\r
237 The <literal><keepalive></literal> element specifies the interval (in seconds) between
\r
238 checks to determine if the service is still running.
\r
241 <callout arearefs="CO1-3">
\r
243 The <literal><stateless></literal> element specifies whether OpenSRF clients can call
\r
244 methods from this service without first having to create a connection to a
\r
245 specific service backend process for that service. If the value is <literal>1</literal>, then
\r
246 the client can simply issue a request and the router will forward the request
\r
247 to an available service and the result will be returned directly to the client.
\r
250 <callout arearefs="CO1-4">
\r
252 The <literal><language></literal> element specifies the programming language in which the
\r
253 service is implemented.
\r
256 <callout arearefs="CO1-5">
\r
258 The <literal><implementation></literal> element pecifies the name of the library or module
\r
259 in which the service is implemented.
\r
262 <callout arearefs="CO1-6">
\r
264 (C implementations only): The <literal><max_requests></literal> element, as a direct child
\r
265 of the service element name, specifies the maximum number of requests a process
\r
266 serves before it is killed and replaced by a new process.
\r
269 <callout arearefs="CO1-7">
\r
271 (Perl implementations only): The <literal><max_requests></literal> element, as a direct
\r
272 child of the <literal><unix_config></literal> element, specifies the maximum number of requests
\r
273 a process serves before it is killed and replaced by a new process.
\r
276 <callout arearefs="CO1-8">
\r
278 The <literal><unix_log></literal> element specifies the name of the log file for
\r
279 language-specific log messages such as syntax warnings.
\r
282 <callout arearefs="CO1-9">
\r
284 The <literal><unix_sock></literal> element specifies the name of the UNIX socket used for
\r
285 inter-process communications.
\r
288 <callout arearefs="CO1-10">
\r
290 The <literal><unix_pid></literal> element specifies the name of the PID file for the
\r
291 master process for the service.
\r
294 <callout arearefs="CO1-11">
\r
296 The <literal><min_children></literal> element specifies the minimum number of child
\r
297 processes that should be running at any given time.
\r
300 <callout arearefs="CO1-12">
\r
302 The <literal><max_children></literal> element specifies the maximum number of child
\r
303 processes that should be running at any given time.
\r
306 <callout arearefs="CO1-13">
\r
308 The <literal><min_spare_children></literal> element specifies the minimum number of idle
\r
309 child processes that should be available to handle incoming requests. If there
\r
310 are fewer than this number of spare child processes, new processes will be
\r
314 <callout arearefs="CO1-14">
\r
316 The`<max_spare_children>` element specifies the maximum number of idle
\r
317 child processes that should be available to handle incoming requests. If there
\r
318 are more than this number of spare child processes, the extra processes will be
\r
323 <simpara>To make the service accessible via the public router, you must also
\r
324 edit the <literal>opensrf_core.xml</literal> configuration file to add the service to the list
\r
325 of publicly accessible services:</simpara>
\r
326 <formalpara><title>Making a service publicly accessible in <literal>opensrf_core.xml</literal></title><para>
\r
327 <programlisting language="xml" linenumbering="unnumbered">
\r
328 <router><co id="CO2-1"/>
\r
329 <!-- This is the public router. On this router, we only register applications
\r
330 which should be accessible to everyone on the opensrf network -->
\r
331 <name>router</name>
\r
332 <domain>public.localhost</domain><co id="CO2-2"/>
\r
334 <service>opensrf.math</service>
\r
335 <service>opensrf.simple-text</service> <co id="CO2-3"/>
\r
339 </para></formalpara>
\r
341 <callout arearefs="CO2-1">
\r
343 This section of the <literal>opensrf_core.xml</literal> file is located at XPath
\r
344 <literal>/config/opensrf/routers/</literal>.
\r
347 <callout arearefs="CO2-2">
\r
349 <literal>public.localhost</literal> is the canonical public router domain in the OpenSRF
\r
350 installation instructions.
\r
353 <callout arearefs="CO2-3">
\r
355 Each <literal><service></literal> element contained in the <literal><services></literal> element
\r
356 offers their services via the public router as well as the private router.
\r
360 <simpara>Once you have defined the new service, you must restart the OpenSRF Router
\r
361 to retrieve the new configuration and start or restart the service itself.</simpara>
\r
363 <simplesect id="_calling_an_opensrf_method">
\r
364 <title>Calling an OpenSRF method</title>
\r
365 <indexterm><primary>srfsh</primary></indexterm>
\r
366 <simpara>OpenSRF clients in any supported language can invoke OpenSRF services in any
\r
367 supported language. So let’s see a few examples of how we can call our fancy
\r
368 new <literal>opensrf.simple-text.reverse()</literal> method:</simpara>
\r
369 <simplesect id="_calling_opensrf_methods_from_the_srfsh_client">
\r
370 <title>Calling OpenSRF methods from the srfsh client</title>
\r
371 <simpara><literal>srfsh</literal> is a command-line tool installed with OpenSRF that you can use to call
\r
372 OpenSRF methods. To call an OpenSRF method, issue the <literal>request</literal> command and
\r
373 pass the OpenSRF service and method name as the first two arguments; then pass
\r
374 one or more JSON objects delimited by commas as the arguments to the method
\r
375 being invoked.</simpara>
\r
376 <simpara>The following example calls the <literal>opensrf.simple-text.reverse</literal> method of the
\r
377 <literal>opensrf.simple-text</literal> OpenSRF service, passing the string <literal>"foobar"</literal> as the
\r
378 only method argument:</simpara>
\r
379 <programlisting language="sh" linenumbering="unnumbered">
\r
381 srfsh # request opensrf.simple-text opensrf.simple-text.reverse "foobar"
\r
383 Received Data: "raboof"
\r
385 =------------------------------------
\r
386 Request Completed Successfully
\r
387 Request Time in seconds: 0.016718
\r
388 =------------------------------------
\r
391 <simplesect id="opensrfIntrospection">
\r
392 <title>Getting documentation for OpenSRF methods from the srfsh client</title>
\r
393 <simpara>The <literal>srfsh</literal> client also gives you command-line access to retrieving metadata
\r
394 about OpenSRF services and methods. For a given OpenSRF method, for example,
\r
395 you can retrieve information such as the minimum number of required arguments,
\r
396 the data type and a description of each argument, the package or library in
\r
397 which the method is implemented, and a description of the method. To retrieve
\r
398 the documentation for an opensrf method from <literal>srfsh</literal>, issue the <literal>introspect</literal>
\r
399 command, followed by the name of the OpenSRF service and (optionally) the
\r
400 name of the OpenSRF method. If you do not pass a method name to the <literal>introspect</literal>
\r
401 command, <literal>srfsh</literal> lists all of the methods offered by the service. If you pass
\r
402 a partial method name, <literal>srfsh</literal> lists all of the methods that match that portion
\r
403 of the method name.</simpara>
\r
404 <note><simpara>The quality and availability of the descriptive information for each
\r
405 method depends on the developer to register the method with complete and
\r
406 accurate information. The quality varies across the set of OpenSRF and
\r
407 Evergreen APIs, although some effort is being put towards improving the
\r
408 state of the internal documentation.</simpara></note>
\r
409 <programlisting language="sh" linenumbering="unnumbered">
\r
410 srfsh# introspect opensrf.simple-text "opensrf.simple-text.reverse"
\r
411 --> opensrf.simple-text
\r
414 "__c":"opensrf.simple-text",
\r
417 "stream":0, <co id="CO3-1"/>
\r
418 "object_hint":"OpenSRF_Application_Demo_SimpleText",
\r
420 "package":"OpenSRF::Application::Demo::SimpleText", <co id="CO3-2"/>
\r
421 "api_name":"opensrf.simple-text.reverse",<co id="CO3-3"/>
\r
422 "server_class":"opensrf.simple-text",
\r
423 "signature":{ <co id="CO3-4"/>
\r
424 "params":[ <co id="CO3-5"/>
\r
426 "desc":"The string to reverse",
\r
431 "desc":"Returns the input string in reverse order\n", <co id="CO3-6"/>
\r
432 "return":{ <co id="CO3-7"/>
\r
433 "desc":"Returns the input string in reverse order",
\r
437 "method":"text_reverse", <co id="CO3-8"/>
\r
438 "argc":1 <co id="CO3-9"/>
\r
443 <callout arearefs="CO3-1">
\r
445 <literal>stream</literal> denotes whether the method supports streaming responses or not.
\r
448 <callout arearefs="CO3-2">
\r
450 <literal>package</literal> identifies which package or library implements the method.
\r
453 <callout arearefs="CO3-3">
\r
455 <literal>api_name</literal> identifies the name of the OpenSRF method.
\r
458 <callout arearefs="CO3-4">
\r
460 <literal>signature</literal> is a hash that describes the parameters for the method.
\r
463 <callout arearefs="CO3-5">
\r
465 <literal>params</literal> is an array of hashes describing each parameter in the method;
\r
466 each parameter has a description (<literal>desc</literal>), name (<literal>name</literal>), and type (<literal>type</literal>).
\r
469 <callout arearefs="CO3-6">
\r
471 <literal>desc</literal> is a string that describes the method itself.
\r
474 <callout arearefs="CO3-7">
\r
476 <literal>return</literal> is a hash that describes the return value for the method; it
\r
477 contains a description of the return value (<literal>desc</literal>) and the type of the
\r
478 returned value (<literal>type</literal>).
\r
481 <callout arearefs="CO3-8">
\r
483 <literal>method</literal> identifies the name of the function or method in the source
\r
487 <callout arearefs="CO3-9">
\r
489 <literal>argc</literal> is an integer describing the minimum number of arguments that
\r
490 must be passed to this method.
\r
495 <simplesect id="_calling_opensrf_methods_from_perl_applications">
\r
496 <title>Calling OpenSRF methods from Perl applications</title>
\r
497 <simpara>To call an OpenSRF method from Perl, you must connect to the OpenSRF service,
\r
498 issue the request to the method, and then retrieve the results.</simpara>
\r
499 <programlisting language="perl" linenumbering="unnumbered">
\r
502 use OpenSRF::AppSession;
\r
503 use OpenSRF::System;
\r
505 OpenSRF::System->bootstrap_client(config_file => '/openils/conf/opensrf_core.xml');<co id="CO4-1"/>
\r
507 my $session = OpenSRF::AppSession->create("opensrf.simple-text");<co id="CO4-2"/>
\r
509 print "substring: Accepts a string and a number as input, returns a string\n";
\r
510 my $result = $session->request("opensrf.simple-text.substring", "foobar", 3);<co id="CO4-3"/>
\r
511 my $request = $result->gather(); <co id="CO4-4"/>
\r
512 print "Substring: $request\n\n";
\r
514 print "split: Accepts two strings as input, returns an array of strings\n";
\r
515 $request = $session->request("opensrf.simple-text.split", "This is a test", " ");<co id="CO4-5"/>
\r
516 my $output = "Split: [";
\r
518 while ($element = $request->recv()) { <co id="CO4-6"/>
\r
519 $output .= $element->content . ", "; <co id="CO4-7"/>
\r
521 $output =~ s/, $/]/;
\r
522 print $output . "\n\n";
\r
524 print "statistics: Accepts an array of strings as input, returns a hash\n";
\r
525 my @many_strings = [
\r
526 "First I think I'll have breakfast",
\r
527 "Then I think that lunch would be nice",
\r
528 "And then seventy desserts to finish off the day"
\r
531 $result = $session->request("opensrf.simple-text.statistics", @many_strings); <co id="CO4-8"/>
\r
532 $request = $result->gather(); <co id="CO4-9"/>
\r
533 print "Length: " . $result->{'length'} . "\n";
\r
534 print "Word count: " . $result->{'word_count'} . "\n";
\r
536 $session->disconnect(); <co id="CO4-10"/>
\r
539 <callout arearefs="CO4-1">
\r
541 The <literal>OpenSRF::System->bootstrap_client()</literal> method reads the OpenSRF
\r
542 configuration information from the indicated file and creates an XMPP client
\r
543 connection based on that information.
\r
546 <callout arearefs="CO4-2">
\r
548 The <literal>OpenSRF::AppSession->create()</literal> method accepts one argument - the name
\r
549 of the OpenSRF service to which you want to want to make one or more requests -
\r
550 and returns an object prepared to use the client connection to make those
\r
554 <callout arearefs="CO4-3">
\r
556 The <literal>OpenSRF::AppSession->request()</literal> method accepts a minimum of one
\r
557 argument - the name of the OpenSRF method to which you want to make a request -
\r
558 followed by zero or more arguments to pass to the OpenSRF method as input
\r
559 values. This example passes a string and an integer to the
\r
560 <literal>opensrf.simple-text.substring</literal> method defined by the <literal>opensrf.simple-text</literal>
\r
564 <callout arearefs="CO4-4">
\r
566 The <literal>gather()</literal> method, called on the result object returned by the
\r
567 <literal>request()</literal> method, iterates over all of the possible results from the result
\r
568 object and returns a single variable.
\r
571 <callout arearefs="CO4-5">
\r
573 This <literal>request()</literal> call passes two strings to the <literal>opensrf.simple-text.split</literal>
\r
574 method defined by the <literal>opensrf.simple-text</literal> OpenSRF service and returns (via
\r
575 <literal>gather()</literal>) a reference to an array of results.
\r
578 <callout arearefs="CO4-6">
\r
580 The <literal>opensrf.simple-text.split()</literal> method is a streaming method that
\r
581 returns an array of results with one element per <literal>recv()</literal> call on the
\r
582 result object. We could use the <literal>gather()</literal> method to retrieve all of the
\r
583 results in a single array reference, but instead we simply iterate over
\r
584 the result variable until there are no more results to retrieve.
\r
587 <callout arearefs="CO4-7">
\r
589 While the <literal>gather()</literal> convenience method returns only the content of the
\r
590 complete set of results for a given request, the <literal>recv()</literal> method returns an
\r
591 OpenSRF result object with <literal>status</literal>, <literal>statusCode</literal>, and <literal>content</literal> fields as
\r
592 we saw in <link linkend="OpenSRFOverHTTP">the HTTP results example</link>.
\r
595 <callout arearefs="CO4-8">
\r
597 This <literal>request()</literal> call passes an array to the
\r
598 <literal>opensrf.simple-text.statistics</literal> method defined by the <literal>opensrf.simple-text</literal>
\r
602 <callout arearefs="CO4-9">
\r
604 The result object returns a hash reference via <literal>gather()</literal>. The hash
\r
605 contains the <literal>length</literal> and <literal>word_count</literal> keys we defined in the method.
\r
608 <callout arearefs="CO4-10">
\r
610 The <literal>OpenSRF::AppSession->disconnect()</literal> method closes the XMPP client
\r
611 connection and cleans up resources associated with the session.
\r
617 <simplesect id="_accepting_and_returning_more_interesting_data_types">
\r
618 <title>Accepting and returning more interesting data types</title>
\r
619 <simpara>Of course, the example of accepting a single string and returning a single
\r
620 string is not very interesting. In real life, our applications tend to pass
\r
621 around multiple arguments, including arrays and hashes. Fortunately, OpenSRF
\r
622 makes that easy to deal with; in Perl, for example, returning a reference to
\r
623 the data type does the right thing. In the following example of a method that
\r
624 returns a list, we accept two arguments of type string: the string to be split,
\r
625 and the delimiter that should be used to split the string.</simpara>
\r
626 <formalpara><title>Basic text splitting method</title><para>
\r
627 <programlisting language="perl" linenumbering="unnumbered">
\r
632 my $delimiter = shift || ' ';
\r
634 my @split_text = split $delimiter, $text;
\r
635 return \@split_text;
\r
638 __PACKAGE__->register_method(
\r
639 method => 'text_split',
\r
640 api_name => 'opensrf.simple-text.split'
\r
643 </para></formalpara>
\r
644 <simpara>We simply return a reference to the list, and OpenSRF does the rest of the work
\r
645 for us to convert the data into the language-independent format that is then
\r
646 returned to the caller. As a caller of a given method, you must rely on the
\r
647 documentation used to register to determine the data structures - if the developer has
\r
648 added the appropriate documentation.</simpara>
\r
650 <simplesect id="_accepting_and_returning_evergreen_objects">
\r
651 <title>Accepting and returning Evergreen objects</title>
\r
652 <simpara>OpenSRF is agnostic about objects; its role is to pass JSON back and forth
\r
653 between OpenSRF clients and services, and it allows the specific clients and
\r
654 services to define their own semantics for the JSON structures. On top of that
\r
655 infrastructure, Evergreen offers the fieldmapper: an object-relational mapper
\r
656 that provides a complete definition of all objects, their properties, their
\r
657 relationships to other objects, the permissions required to create, read,
\r
658 update, or delete objects of that type, and the database table or view on which
\r
659 they are based.</simpara>
\r
660 <indexterm><primary>Fieldmapper</primary></indexterm>
\r
661 <simpara>The Evergreen fieldmapper offers a great deal of convenience for working with
\r
662 complex system objects beyond the basic mapping of classes to database
\r
663 schemas. Although the result is passed over the wire as a JSON object
\r
664 containing the indicated fields, fieldmapper-aware clients then turn those
\r
665 JSON objects into native objects with setter / getter methods for each field.</simpara>
\r
666 <simpara>All of this metadata about Evergreen objects is defined in the
\r
667 fieldmapper configuration file (<literal>/openils/conf/fm_IDL.xml</literal>), and access to
\r
668 these classes is provided by the <literal>open-ils.cstore</literal>, <literal>open-ils.pcrud</literal>, and
\r
669 <literal>open-ils.reporter-store</literal> OpenSRF services which parse the fieldmapper
\r
670 configuration file and dynamically register OpenSRF methods for creating,
\r
671 reading, updating, and deleting all of the defined classes.</simpara>
\r
672 <formalpara><title>Example fieldmapper class definition for "Open User Summary"</title><para>
\r
673 <programlisting language="xml" linenumbering="unnumbered">
\r
674 <class id="mous" controller="open-ils.cstore open-ils.pcrud"
\r
675 oils_obj:fieldmapper="money::open_user_summary"
\r
676 oils_persist:tablename="money.open_usr_summary"
\r
677 reporter:label="Open User Summary"> <co id="CO5-1"/>
\r
678 <fields oils_persist:primary="usr" oils_persist:sequence=""> <co id="CO5-2"/>
\r
679 <field name="balance_owed" reporter:datatype="money" /> <co id="CO5-3"/>
\r
680 <field name="total_owed" reporter:datatype="money" />
\r
681 <field name="total_paid" reporter:datatype="money" />
\r
682 <field name="usr" reporter:datatype="link"/>
\r
685 <link field="usr" reltype="has_a" key="id" map="" class="au"/><co id="CO5-4"/>
\r
687 <permacrud xmlns="http://open-ils.org/spec/opensrf/IDL/permacrud/v1"><co id="CO5-5"/>
\r
689 <retrieve permission="VIEW_USER"><co id="CO5-6"/>
\r
690 <context link="usr" field="home_ou"/><co id="CO5-7"/>
\r
696 </para></formalpara>
\r
698 <callout arearefs="CO5-1">
\r
700 The <literal><class></literal> element defines the class:
\r
705 The <literal>id</literal> attribute defines the <emphasis>class hint</emphasis> that identifies the class both
\r
706 elsewhere in the fieldmapper configuration file, such as in the value of the
\r
707 <literal>field</literal> attribute of the <literal><link></literal> element, and in the JSON object itself when
\r
708 it is instantiated. For example, an "Open User Summary" JSON object would have
\r
709 the top level property of <literal>"__c":"mous"</literal>.
\r
714 The <literal>controller</literal> attribute identifies the services that have direct access
\r
715 to this class. If <literal>open-ils.pcrud</literal> is not listed, for example, then there is
\r
716 no means to directly access members of this class through a public service.
\r
721 The <literal>oils_obj:fieldmapper</literal> attribute defines the name of the Perl
\r
722 fieldmapper class that will be dynamically generated to provide setter and
\r
723 getter methods for instances of the class.
\r
728 The <literal>oils_persist:tablename</literal> attribute identifies the schema name and table
\r
729 name of the database table that stores the data that represents the instances
\r
730 of this class. In this case, the schema is <literal>money</literal> and the table is
\r
731 <literal>open_usr_summary</literal>.
\r
736 The <literal>reporter:label</literal> attribute defines a human-readable name for the class
\r
737 used in the reporting interface to identify the class. These names are defined
\r
738 in English in the fieldmapper configuration file; however, they are extracted
\r
739 so that they can be translated and served in the user’s language of choice.
\r
744 <callout arearefs="CO5-2">
\r
746 The <literal><fields></literal> element lists all of the fields that belong to the object.
\r
751 The <literal>oils_persist:primary</literal> attribute identifies the field that acts as the
\r
752 primary key for the object; in this case, the field with the name <literal>usr</literal>.
\r
757 The <literal>oils_persist:sequence</literal> attribute identifies the sequence object
\r
758 (if any) in this database provides values for new instances of this class. In
\r
759 this case, the primary key is defined by a field that is linked to a different
\r
760 table, so no sequence is used to populate these instances.
\r
765 <callout arearefs="CO5-3">
\r
767 Each <literal><field></literal> element defines a single field with the following attributes:
\r
772 The <literal>name</literal> attribute identifies the column name of the field in the
\r
773 underlying database table as well as providing a name for the setter / getter
\r
774 method that can be invoked in the JSON or native version of the object.
\r
779 The <literal>reporter:datatype</literal> attribute defines how the reporter should treat
\r
780 the contents of the field for the purposes of querying and display.
\r
785 The <literal>reporter:label</literal> attribute can be used to provide a human-readable name
\r
786 for each field; without it, the reporter falls back to the value of the <literal>name</literal>
\r
792 <callout arearefs="CO5-4">
\r
794 The <literal><links></literal> element contains a set of zero or more <literal><link></literal> elements,
\r
795 each of which defines a relationship between the class being described and
\r
801 The <literal>field</literal> attribute identifies the field named in this class that links
\r
802 to the external class.
\r
807 The <literal>reltype</literal> attribute identifies the kind of relationship between the
\r
808 classes; in the case of <literal>has_a</literal>, each value in the <literal>usr</literal> field is guaranteed
\r
809 to have a corresponding value in the external class.
\r
814 The <literal>key</literal> attribute identifies the name of the field in the external
\r
815 class to which this field links.
\r
820 The rarely-used <literal>map</literal> attribute identifies a second class to which
\r
821 the external class links; it enables this field to define a direct
\r
822 relationship to an external class with one degree of separation, to
\r
823 avoid having to retrieve all of the linked members of an intermediate
\r
824 class just to retrieve the instances from the actual desired target class.
\r
829 The <literal>class</literal> attribute identifies the external class to which this field
\r
835 <callout arearefs="CO5-5">
\r
837 The <literal><permacrud></literal> element defines the permissions that must have been
\r
838 granted to a user to operate on instances of this class.
\r
841 <callout arearefs="CO5-6">
\r
843 The <literal><retrieve></literal> element is one of four possible children of the
\r
844 <literal><actions></literal> element that define the permissions required for each action:
\r
845 create, retrieve, update, and delete.
\r
850 The <literal>permission</literal> attribute identifies the name of the permission that must
\r
851 have been granted to the user to perform the action.
\r
856 The <literal>contextfield</literal> attribute, if it exists, defines the field in this class
\r
857 that identifies the library within the system for which the user must have
\r
858 prvileges to work. If a user has been granted a given permission, but has not been
\r
859 granted privileges to work at a given library, they can not perform the action
\r
865 <callout arearefs="CO5-7">
\r
867 The rarely-used <literal><context></literal> element identifies a linked field (<literal>link</literal>
\r
868 attribute) in this class which links to an external class that holds the field
\r
869 (<literal>field</literal> attribute) that identifies the library within the system for which the
\r
870 user must have privileges to work.
\r
874 <simpara>When you retrieve an instance of a class, you can ask for the result to
\r
875 <emphasis>flesh</emphasis> some or all of the linked fields of that class, so that the linked
\r
876 instances are returned embedded directly in your requested instance. In that
\r
877 same request you can ask for the fleshed instances to in turn have their linked
\r
878 fields fleshed. By bundling all of this into a single request and result
\r
879 sequence, you can avoid the network overhead of requiring the client to request
\r
880 the base object, then request each linked object in turn.</simpara>
\r
881 <simpara>You can also iterate over a collection of instances and set the automatically
\r
882 generated <literal>isdeleted</literal>, <literal>isupdated</literal>, or <literal>isnew</literal> properties to indicate that
\r
883 the given instance has been deleted, updated, or created respectively.
\r
884 Evergreen can then act in batch mode over the collection to perform the
\r
885 requested actions on any of the instances that have been flagged for action.</simpara>
\r
887 <simplesect id="_returning_streaming_results">
\r
888 <title>Returning streaming results</title>
\r
889 <simpara>In the previous implementation of the <literal>opensrf.simple-text.split</literal> method, we
\r
890 returned a reference to the complete array of results. For small values being
\r
891 delivered over the network, this is perfectly acceptable, but for large sets of
\r
892 values this can pose a number of problems for the requesting client. Consider a
\r
893 service that returns a set of bibliographic records in response to a query like
\r
894 "all records edited in the past month"; if the underlying database is
\r
895 relatively active, that could result in thousands of records being returned as
\r
896 a single network request. The client would be forced to block until all of the
\r
897 results are returned, likely resulting in a significant delay, and depending on
\r
898 the implementation, correspondingly large amounts of memory might be consumed
\r
899 as all of the results are read from the network in a single block.</simpara>
\r
900 <simpara>OpenSRF offers a solution to this problem. If the method returns results that
\r
901 can be divided into separate meaningful units, you can register the OpenSRF
\r
902 method as a streaming method and enable the client to loop over the results one
\r
903 unit at a time until the method returns no further results. In addition to
\r
904 registering the method with the provided name, OpenSRF also registers an additional
\r
905 method with <literal>.atomic</literal> appended to the method name. The <literal>.atomic</literal> variant gathers
\r
906 all of the results into a single block to return to the client, giving the caller
\r
907 the ability to choose either streaming or atomic results from a single method
\r
908 definition.</simpara>
\r
909 <simpara>In the following example, the text splitting method has been reimplemented to
\r
910 support streaming; very few changes are required:</simpara>
\r
911 <formalpara><title>Text splitting method - streaming mode</title><para>
\r
912 <programlisting language="perl" linenumbering="unnumbered">
\r
917 my $delimiter = shift || ' ';
\r
919 my @split_text = split $delimiter, $text;
\r
920 foreach my $string (@split_text) { <co id="CO6-1"/>
\r
921 $conn->respond($string);
\r
926 __PACKAGE__->register_method(
\r
927 method => 'text_split',
\r
928 api_name => 'opensrf.simple-text.split',
\r
929 stream => 1<co id="CO6-2"/>
\r
932 </para></formalpara>
\r
934 <callout arearefs="CO6-1">
\r
936 Rather than returning a reference to the array, a streaming method loops
\r
937 over the contents of the array and invokes the <literal>respond()</literal> method of the
\r
938 connection object on each element of the array.
\r
941 <callout arearefs="CO6-2">
\r
943 Registering the method as a streaming method instructs OpenSRF to also
\r
944 register an atomic variant (<literal>opensrf.simple-text.split.atomic</literal>).
\r
949 <simplesect id="_error_warning_info_debug">
\r
950 <title>Error! Warning! Info! Debug!</title>
\r
951 <simpara>As hard as it may be to believe, it is true: applications sometimes do not
\r
952 behave in the expected manner, particularly when they are still under
\r
953 development. The service language bindings for OpenSRF include integrated
\r
954 support for logging messages at the levels of ERROR, WARNING, INFO, DEBUG, and
\r
955 the extremely verbose INTERNAL to either a local file or to a syslogger
\r
956 service. The destination of the log files, and the level of verbosity to be
\r
957 logged, is set in the <literal>opensrf_core.xml</literal> configuration file. To add logging to
\r
958 our Perl example, we just have to add the <literal>OpenSRF::Utils::Logger</literal> package to our
\r
959 list of used Perl modules, then invoke the logger at the desired logging level.</simpara>
\r
960 <simpara>You can include many calls to the OpenSRF logger; only those that are higher
\r
961 than your configured logging level will actually hit the log. The following
\r
962 example exercises all of the available logging levels in OpenSRF:</simpara>
\r
963 <programlisting language="perl" linenumbering="unnumbered">
\r
964 use OpenSRF::Utils::Logger;
\r
965 my $logger = OpenSRF::Utils::Logger;
\r
966 # some code in some function
\r
968 $logger->error("Hmm, something bad DEFINITELY happened!");
\r
969 $logger->warn("Hmm, something bad might have happened.");
\r
970 $logger->info("Something happened.");
\r
971 $logger->debug("Something happened; here are some more details.");
\r
972 $logger->internal("Something happened; here are all the gory details.")
\r
975 <simpara>If you call the mythical OpenSRF method containing the preceding OpenSRF logger
\r
976 statements on a system running at the default logging level of INFO, you will
\r
977 only see the INFO, WARN, and ERR messages, as follows:</simpara>
\r
978 <formalpara><title>Results of logging calls at the default level of INFO</title><para>
\r
980 [2010-03-17 22:27:30] opensrf.simple-text [ERR :5681:SimpleText.pm:277:]
\r
981 [2010-03-17 22:27:30] opensrf.simple-text [WARN:5681:SimpleText.pm:278:]
\r
982 [2010-03-17 22:27:30] opensrf.simple-text [INFO:5681:SimpleText.pm:279:]
\r
984 </para></formalpara>
\r
985 <simpara>If you then increase the the logging level to INTERNAL (5), the logs will
\r
986 contain much more information, as follows:</simpara>
\r
987 <formalpara><title>Results of logging calls at the default level of INTERNAL</title><para>
\r
989 [2010-03-17 22:48:11] opensrf.simple-text [ERR :5934:SimpleText.pm:277:]
\r
990 [2010-03-17 22:48:11] opensrf.simple-text [WARN:5934:SimpleText.pm:278:]
\r
991 [2010-03-17 22:48:11] opensrf.simple-text [INFO:5934:SimpleText.pm:279:]
\r
992 [2010-03-17 22:48:11] opensrf.simple-text [DEBG:5934:SimpleText.pm:280:]
\r
993 [2010-03-17 22:48:11] opensrf.simple-text [INTL:5934:SimpleText.pm:281:]
\r
994 [2010-03-17 22:48:11] opensrf.simple-text [ERR :5934:SimpleText.pm:283:]
\r
995 [2010-03-17 22:48:21] opensrf.simple-text [INTL:5934:Cache.pm:125:]
\r
996 [2010-03-17 22:48:21] opensrf.simple-text [DEBG:5934:Application.pm:579:]
\r
997 [2010-03-17 22:48:21] opensrf.simple-text [DEBG:5934:Application.pm:586:]
\r
998 [2010-03-17 22:48:21] opensrf.simple-text [DEBG:5934:Application.pm:190:]
\r
999 [2010-03-17 22:48:21] opensrf.simple-text [INTL:5934:AppSession.pm:780:] Calling queue_wait(0)
\r
1000 [2010-03-17 22:48:21] opensrf.simple-text [INTL:5934:AppSession.pm:769:] Resending...0
\r
1001 [2010-03-17 22:48:21] opensrf.simple-text [INTL:5934:AppSession.pm:450:] In send
\r
1002 [2010-03-17 22:48:21] opensrf.simple-text [DEBG:5934:AppSession.pm:506:]
\r
1003 [2010-03-17 22:48:21] opensrf.simple-text [DEBG:5934:AppSession.pm:506:]
\r
1006 </para></formalpara>
\r
1007 <simpara>To see everything that is happening in OpenSRF, try leaving your logging level
\r
1008 set to INTERNAL for a few minutes - just ensure that you have a lot of free disk
\r
1009 space available if you have a moderately busy system!</simpara>
\r
1011 <simplesect id="_caching_results_one_secret_of_scalability">
\r
1012 <title>Caching results: one secret of scalability</title>
\r
1013 <indexterm><primary>search results</primary><secondary>caching</secondary></indexterm>
\r
1014 <simpara>If you have ever used an application that depends on a remote Web service
\r
1015 outside of your control — say, if you need to retrieve results from a
\r
1016 microblogging service — you know the pain of latency and dependability (or the
\r
1017 lack thereof). To improve the response time for OpenSRF services, you can take
\r
1018 advantage of the support offered by the <literal>OpenSRF::Utils::Cache</literal> module for
\r
1019 communicating with a local instance or cluster of <literal>memcache</literal> daemons to store
\r
1020 and retrieve persistent values. The following example demonstrates caching
\r
1021 by sleeping for 10 seconds the first time it receives a given cache key and
\r
1022 cannot retrieve a corresponding value from the cache:</simpara>
\r
1023 <formalpara><title>Simple caching OpenSRF service</title><para>
\r
1024 <programlisting language="perl" linenumbering="unnumbered">
\r
1025 use OpenSRF::Utils::Cache;<co id="CO7-1"/>
\r
1029 my $test_key = shift;
\r
1030 my $cache = OpenSRF::Utils::Cache->new('global'); <co id="CO7-2"/>
\r
1031 my $cache_key = "opensrf.simple-text.test_cache.$test_key"; <co id="CO7-3"/>
\r
1032 my $result = $cache->get_cache($cache_key) || undef; <co id="CO7-4"/>
\r
1034 $logger->info("Resolver found a cache hit");
\r
1037 sleep 10; <co id="CO7-5"/>
\r
1038 my $cache_timeout = 300; <co id="CO7-6"/>
\r
1039 $cache->put_cache($cache_key, "here", $cache_timeout); <co id="CO7-7"/>
\r
1040 return "There was no cache hit.";
\r
1043 </para></formalpara>
\r
1045 <callout arearefs="CO7-1">
\r
1047 The OpenSRF::Utils::Cache module provides access to the built-in caching
\r
1048 support in OpenSRF.
\r
1051 <callout arearefs="CO7-2">
\r
1053 The constructor for the cache object accepts a single argument to define
\r
1054 the cache type for the object. Each cache type can use a separate <literal>memcache</literal>
\r
1055 server to keep the caches separated. Most Evergreen services use the <literal>global</literal>
\r
1056 cache, while the <literal>anon</literal> cache is used for Web sessions.
\r
1059 <callout arearefs="CO7-3">
\r
1061 The cache key is simply a string that uniquely identifies the value you
\r
1062 want to store or retrieve. This line creates a cache key based on the OpenSRF
\r
1063 method name and request input value.
\r
1066 <callout arearefs="CO7-4">
\r
1068 The <literal>get_cache()</literal> method checks to see if the cache key already exists. If
\r
1069 a matching key is found, the service immediately returns the stored value.
\r
1072 <callout arearefs="CO7-5">
\r
1074 If the cache key does not exist, the code sleeps for 10 seconds to
\r
1075 simulate a call to a slow remote Web service or an intensive process.
\r
1078 <callout arearefs="CO7-6">
\r
1080 The <literal>$cache_timeout</literal> variable represents a value for the lifetime of the
\r
1081 cache key in seconds.
\r
1084 <callout arearefs="CO7-7">
\r
1086 After the code retrieves its value (or, in the case of this example,
\r
1087 finishes sleeping), it creates the cache entry by calling the <literal>put_cache()</literal>
\r
1088 method. The method accepts three arguments: the cache key, the value to be
\r
1089 stored ("here"), and the timeout value in seconds to ensure that we do not
\r
1090 return stale data on subsequent calls.
\r
1095 <simplesect id="_initializing_the_service_and_its_children_child_labour">
\r
1096 <title>Initializing the service and its children: child labour</title>
\r
1097 <simpara>When an OpenSRF service is started, it looks for a procedure called
\r
1098 <literal>initialize()</literal> to set up any global variables shared by all of the children of
\r
1099 the service. The <literal>initialize()</literal> procedure is typically used to retrieve
\r
1100 configuration settings from the <literal>opensrf.xml</literal> file.</simpara>
\r
1101 <simpara>An OpenSRF service spawns one or more children to actually do the work
\r
1102 requested by callers of the service. For every child process an OpenSRF service
\r
1103 spawns, the child process clones the parent environment and then each child
\r
1104 process runs the <literal>child_init()</literal> process (if any) defined in the OpenSRF service
\r
1105 to initialize any child-specific settings.</simpara>
\r
1106 <simpara>When the OpenSRF service kills a child process, it invokes the <literal>child_exit()</literal>
\r
1107 procedure (if any) to clean up any resources associated with the child process.
\r
1108 Similarly, when the OpenSRF service is stopped, it calls the <literal>DESTROY()</literal>
\r
1109 procedure to clean up any remaining resources.</simpara>
\r
1111 <simplesect id="_retrieving_configuration_settings">
\r
1112 <title>Retrieving configuration settings</title>
\r
1113 <simpara>The settings for OpenSRF services are maintained in the <literal>opensrf.xml</literal> XML
\r
1114 configuration file. The structure of the XML document consists of a root
\r
1115 element <literal><opensrf></literal> containing two child elements:</simpara>
\r
1119 The <literal><default></literal> element contains an <literal><apps></literal> element describing all
\r
1120 OpenSRF services running on this system — see <xref linkend="serviceRegistration"/> --, as
\r
1121 well as any other arbitrary XML descriptions required for global configuration
\r
1122 purposes. For example, Evergreen uses this section for email notification and
\r
1123 inter-library patron privacy settings.
\r
1128 The <literal><hosts></literal> element contains one element per host that participates in
\r
1129 this OpenSRF system. Each host element must include an <literal><activeapps></literal> element
\r
1130 that lists all of the services to start on this host when the system starts
\r
1131 up. Each host element can optionally override any of the default settings.
\r
1135 <simpara>OpenSRF includes a service named <literal>opensrf.settings</literal> to provide distributed
\r
1136 cached access to the configuration settings with a simple API:</simpara>
\r
1140 <literal>opensrf.settings.default_config.get</literal> accepts zero arguments and returns
\r
1141 the complete set of default settings as a JSON document.
\r
1146 <literal>opensrf.settings.host_config.get</literal> accepts one argument (hostname) and
\r
1147 returns the complete set of settings, as customized for that hostname, as a
\r
1153 <literal>opensrf.settings.xpath.get</literal> accepts one argument (an
\r
1154 <ulink url="http://www.w3.org/TR/xpath/">XPath</ulink> expression) and returns the portion of
\r
1155 the configuration file that matches the expression as a JSON document.
\r
1159 <simpara>For example, to determine whether an Evergreen system uses the opt-in
\r
1160 support for sharing patron information between libraries, you could either
\r
1161 invoke the <literal>opensrf.settings.default_config.get</literal> method and parse the
\r
1162 JSON document to determine the value, or invoke the <literal>opensrf.settings.xpath.get</literal>
\r
1163 method with the XPath <literal>/opensrf/default/share/user/opt_in</literal> argument to
\r
1164 retrieve the value directly.</simpara>
\r
1165 <simpara>In practice, OpenSRF includes convenience libraries in all of its client
\r
1166 language bindings to simplify access to configuration values. C offers
\r
1167 osrfConfig.c, Perl offers <literal>OpenSRF::Utils::SettingsClient</literal>, Java offers
\r
1168 <literal>org.opensrf.util.SettingsClient</literal>, and Python offers <literal>osrf.set</literal>. These
\r
1169 libraries locally cache the configuration file to avoid network roundtrips for
\r
1170 every request and enable the developer to request specific values without
\r
1171 having to manually construct XPath expressions.</simpara>
\r
1174 <section id="_getting_under_the_covers_with_opensrf">
\r
1175 <title>OpenSRF Communication Flows</title>
\r
1176 <indexterm><primary>OpenSRF</primary><secondary>Communication Flows</secondary></indexterm>
\r
1177 <simpara>Now that you have seen that it truly is easy to create an OpenSRF service, we
\r
1178 can take a look at what is going on under the covers to make all of this work
\r
1179 for you.</simpara>
\r
1180 <simplesect id="_get_on_the_messaging_bus_safely">
\r
1181 <title>Get on the messaging bus - safely</title>
\r
1182 <simpara>One of the core innovations of OpenSRF was to use the Extensible Messaging and
\r
1183 Presence Protocol (XMPP, more colloquially known as Jabber) as the messaging
\r
1184 bus that ties OpenSRF services together across servers. XMPP is an "XML
\r
1185 protocol for near-real-time messaging, presence, and request-response services"
\r
1186 (<ulink url="http://www.ietf.org/rfc/rfc3920.txt">http://www.ietf.org/rfc/rfc3920.txt</ulink>) that OpenSRF relies on to handle most of
\r
1187 the complexity of networked communications. OpenSRF requres an XMPP server
\r
1188 that supports multiple domains such as <ulink url="http://www.ejabberd.im/">ejabberd</ulink>.
\r
1189 Multiple domain support means that a single server can support XMPP virtual
\r
1190 hosts with separate sets of users and access privileges per domain. By
\r
1191 routing communications through separate public and private XMPP domains,
\r
1192 OpenSRF services gain an additional layer of security.</simpara>
\r
1193 <simpara>The <ulink url="http://evergreen-ils.org/dokuwiki/doku.php?id=opensrf:1.2:install">OpenSRF
\r
1194 installation documentation</ulink> instructs you to create two separate hostnames
\r
1195 (<literal>private.localhost</literal> and <literal>public.localhost</literal>) to use as XMPP domains. OpenSRF
\r
1196 can control access to its services based on the domain of the client and
\r
1197 whether a given service allows access from clients on the public domain. When
\r
1198 you start OpenSRF, the first XMPP clients that connect to the XMPP server are
\r
1199 the OpenSRF public and private <emphasis>routers</emphasis>. OpenSRF routers maintain a list of
\r
1200 available services and connect clients to available services. When an OpenSRF
\r
1201 service starts, it establishes a connection to the XMPP server and registers
\r
1202 itself with the private router. The OpenSRF configuration contains a list of
\r
1203 public OpenSRF services, each of which must also register with the public
\r
1206 <simplesect id="_opensrf_communication_flows_over_xmpp">
\r
1207 <title>OpenSRF communication flows over XMPP</title>
\r
1208 <indexterm><primary>XMPP</primary></indexterm>
\r
1209 <simpara>In a minimal OpenSRF deployment, two XMPP users named "router" connect to the
\r
1210 XMPP server, with one connected to the private XMPP domain and one connected to
\r
1211 the public XMPP domain. Similarly, two XMPP users named "opensrf" connect to
\r
1212 the XMPP server via the private and public XMPP domains. When an OpenSRF
\r
1213 service is started, it uses the "opensrf" XMPP user to advertise its
\r
1214 availability with the corresponding router on that XMPP domain; the XMPP server
\r
1215 automatically assigns a Jabber ID (<emphasis>JID</emphasis>) based on the client hostname to each
\r
1216 service’s listener process and each connected drone process waiting to carry
\r
1217 out requests. When an OpenSRF router receives a request to invoke a method on a
\r
1218 given service, it connects the requester to the next available listener in the
\r
1219 list of registered listeners for that service.</simpara>
\r
1220 <simpara>Services and clients connect to the XMPP server using a single set of XMPP
\r
1221 client credentials (for example, <literal>opensrf@private.localhost</literal>), but use XMPP
\r
1222 resource identifiers to differentiate themselves in the JID for each
\r
1223 connection. For example, the JID for a copy of the <literal>opensrf.simple-text</literal>
\r
1224 service with process ID <literal>6285</literal> that has connected to the <literal>private.localhost</literal>
\r
1225 domain using the <literal>opensrf</literal> XMPP client credentials could be
\r
1226 <literal>opensrf@private.localhost/opensrf.simple-text_drone_at_localhost_6285</literal>. By
\r
1227 convention, the user name for OpenSRF clients is <literal>opensrf</literal>, and the user name
\r
1228 for OpenSRF routers is <literal>router</literal>, so the XMPP server for OpenSRF will have four
\r
1229 separate users registered:
\r
1230 * <literal>opensrf@private.localhost</literal> is an OpenSRF client that connects with these
\r
1231 credentials and which can access any OpenSRF service.
\r
1232 * <literal>opensrf@public.localhost</literal> is an OpenSRF client that connects with these
\r
1233 credentials and which can only access OpenSRF services that have registered
\r
1234 with the public router.
\r
1235 * <literal>router@private.localhost</literal> is the private OpenSRF router with which all
\r
1236 services register.
\r
1237 * <literal>router@public.localhost</literal> is the public OpenSRF router with which only
\r
1238 services that must be publicly accessible register.</simpara>
\r
1239 <simpara>All OpenSRF services automatically register themselves with the private XMPP
\r
1240 domain, but only those services that register themselves with the public XMPP
\r
1241 domain can be invoked from public OpenSRF clients. The OpenSRF client and
\r
1242 router user names, passwords, and domain names, along with the list of services
\r
1243 that should be public, are contained in the <literal>opensrf_core.xml</literal> configuration
\r
1246 <simplesect id="OpenSRFOverHTTP">
\r
1247 <title>OpenSRF communication flows over HTTP</title>
\r
1248 <indexterm><primary>HTTP</primary><secondary>translator</secondary></indexterm>
\r
1249 <simpara>In some contexts, access to a full XMPP client is not a practical option. For
\r
1250 example, while XMPP clients have been implemented in JavaScript, you might
\r
1251 be concerned about browser compatibility and processing overhead - or you might
\r
1252 want to issue OpenSRF requests from the command line with <literal>curl</literal>. Fortunately,
\r
1253 any OpenSRF service registered with the public router is accessible via the
\r
1254 OpenSRF HTTP Translator. The OpenSRF HTTP Translator implements the
\r
1255 <ulink url="http://www.open-ils.org/dokuwiki/doku.php?id=opensrf_over_http">OpenSRF-over-HTTP
\r
1256 proposed specification</ulink> as an Apache module that translates HTTP requests into
\r
1257 OpenSRF requests and returns OpenSRF results as HTTP results to the initiating
\r
1258 HTTP client.</simpara>
\r
1259 <formalpara><title>Issuing an HTTP POST request to an OpenSRF method via the OpenSRF HTTP Translator</title><para>
\r
1260 <programlisting language="bash" linenumbering="unnumbered">
\r
1261 # curl request broken up over multiple lines for legibility
\r
1262 curl -H "X-OpenSRF-service: opensrf.simple-text"<co id="CO8-1"/>
\r
1263 --data 'osrf-msg=[ \<co id="CO8-2"/>
\r
1264 {"__c":"osrfMessage","__p":{"threadTrace":0,"locale":"en-CA", <co id="CO8-3"/>
\r
1265 "type":"REQUEST","payload": {"__c":"osrfMethod","__p":
\r
1266 {"method":"opensrf.simple-text.reverse","params":["foobar"]}
\r
1269 http://localhost/osrf-http-translator <co id="CO8-4"/>
\r
1271 </para></formalpara>
\r
1273 <callout arearefs="CO8-1">
\r
1275 The <literal>X-OpenSRF-service</literal> header identifies the OpenSRF service of interest.
\r
1278 <callout arearefs="CO8-2">
\r
1280 The POST request consists of a single parameter, the <literal>osrf-msg</literal> value,
\r
1281 which contains a JSON array.
\r
1284 <callout arearefs="CO8-3">
\r
1286 The first object is an OpenSRF message (<literal>"__c":"osrfMessage"</literal>) with a set of
\r
1287 parameters (<literal>"__p":{}</literal>).
\r
1292 The identifier for the request (<literal>"threadTrace":0</literal>); this value is echoed
\r
1293 back in the result.
\r
1298 The message type (<literal>"type":"REQUEST"</literal>).
\r
1303 The locale for the message; if the OpenSRF method is locale-sensitive, it
\r
1304 can check the locale for each OpenSRF request and return different information
\r
1305 depending on the locale.
\r
1310 The payload of the message (<literal>"payload":{}</literal>) containing the OpenSRF method
\r
1311 request (<literal>"__c":"osrfMethod"</literal>) and its parameters (<literal>"__p:"{}</literal>).
\r
1316 The method name for the request (<literal>"method":"opensrf.simple-text.reverse"</literal>).
\r
1321 A set of JSON parameters to pass to the method (<literal>"params":["foobar"]</literal>); in
\r
1322 this case, a single string <literal>"foobar"</literal>.
\r
1329 <callout arearefs="CO8-4">
\r
1331 The URL on which the OpenSRF HTTP translator is listening,
\r
1332 <literal>/osrf-http-translator</literal> is the default location in the Apache example
\r
1333 configuration files shipped with the OpenSRF source, but this is configurable.
\r
1337 <formalpara><title>Results from an HTTP POST request to an OpenSRF method via the OpenSRF HTTP Translator</title><para>
\r
1338 <programlisting language="bash" linenumbering="unnumbered">
\r
1339 # HTTP response broken up over multiple lines for legibility
\r
1340 [{"__c":"osrfMessage","__p": <co id="CO9-1"/>
\r
1341 {"threadTrace":0, "payload": <co id="CO9-2"/>
\r
1342 {"__c":"osrfResult","__p": <co id="CO9-3"/>
\r
1343 {"status":"OK","content":"raboof","statusCode":200} <co id="CO9-4"/>
\r
1344 },"type":"RESULT","locale":"en-CA" <co id="CO9-5"/>
\r
1347 {"__c":"osrfMessage","__p": <co id="CO9-6"/>
\r
1348 {"threadTrace":0,"payload": <co id="CO9-7"/>
\r
1349 {"__c":"osrfConnectStatus","__p": <co id="CO9-8"/>
\r
1350 {"status":"Request Complete","statusCode":205}<co id="CO9-9"/>
\r
1351 },"type":"STATUS","locale":"en-CA" <co id="CO9-10"/>
\r
1355 </para></formalpara>
\r
1357 <callout arearefs="CO9-1">
\r
1359 The OpenSRF HTTP Translator returns an array of JSON objects in its
\r
1360 response. Each object in the response is an OpenSRF message
\r
1361 (<literal>"__c":"osrfMessage"</literal>) with a collection of response parameters (<literal>"__p":</literal>).
\r
1364 <callout arearefs="CO9-2">
\r
1366 The OpenSRF message identifier (<literal>"threadTrace":0</literal>) confirms that this
\r
1367 message is in response to the request matching the same identifier.
\r
1370 <callout arearefs="CO9-3">
\r
1372 The message includes a payload JSON object (<literal>"payload":</literal>) with an OpenSRF
\r
1373 result for the request (<literal>"__c":"osrfResult"</literal>).
\r
1376 <callout arearefs="CO9-4">
\r
1378 The result includes a status indicator string (<literal>"status":"OK"</literal>), the content
\r
1379 of the result response - in this case, a single string "raboof"
\r
1380 (<literal>"content":"raboof"</literal>) - and an integer status code for the request
\r
1381 (<literal>"statusCode":200</literal>).
\r
1384 <callout arearefs="CO9-5">
\r
1386 The message also includes the message type (<literal>"type":"RESULT"</literal>) and the
\r
1387 message locale (<literal>"locale":"en-CA"</literal>).
\r
1390 <callout arearefs="CO9-6">
\r
1392 The second message in the set of results from the response.
\r
1395 <callout arearefs="CO9-7">
\r
1397 Again, the message identifier confirms that this message is in response to
\r
1398 a particular request.
\r
1401 <callout arearefs="CO9-8">
\r
1403 The payload of the message denotes that this message is an
\r
1404 OpenSRF connection status message (<literal>"__c":"osrfConnectStatus"</literal>), with some
\r
1405 information about the particular OpenSRF connection that was used for this
\r
1409 <callout arearefs="CO9-9">
\r
1411 The response parameters for an OpenSRF connection status message include a
\r
1412 verbose status (<literal>"status":"Request Complete"</literal>) and an integer status code for
\r
1413 the connection status (`"statusCode":205).
\r
1416 <callout arearefs="CO9-10">
\r
1418 The message also includes the message type (<literal>"type":"RESULT"</literal>) and the
\r
1419 message locale (<literal>"locale":"en-CA"</literal>).
\r
1423 <tip><simpara>Before adding a new public OpenSRF service, ensure that it does
\r
1424 not introduce privilege escalation or unchecked access to data. For example,
\r
1425 the Evergreen <literal>open-ils.cstore</literal> private service is an object-relational mapper
\r
1426 that provides read and write access to the entire Evergreen database, so it
\r
1427 would be catastrophic to expose that service publicly. In comparison, the
\r
1428 Evergreen <literal>open-ils.pcrud</literal> public service offers the same functionality as
\r
1429 <literal>open-ils.cstore</literal> to any connected HTTP client or OpenSRF client, but the
\r
1430 additional authentication and authorization layer in <literal>open-ils.pcrud</literal> prevents
\r
1431 unchecked access to Evergreen’s data.</simpara></tip>
\r
1433 <simplesect id="_stateless_and_stateful_connections">
\r
1434 <title>Stateless and stateful connections</title>
\r
1435 <simpara>OpenSRF supports both <emphasis>stateless</emphasis> and <emphasis>stateful</emphasis> connections. When an OpenSRF
\r
1436 client issues a <literal>REQUEST</literal> message in a <emphasis>stateless</emphasis> connection, the router
\r
1437 forwards the request to the next available service and the service returns the
\r
1438 result directly to the client.</simpara>
\r
1440 <simpara>When an OpenSRF client issues a <literal>CONNECT</literal> message to create a <emphasis>stateful</emphasis> conection, the
\r
1441 router returns the Jabber ID of the next available service to the client so
\r
1442 that the client can issue one or more <literal>REQUEST</literal> message directly to that
\r
1443 particular service and the service will return corresponding <literal>RESULT</literal> messages
\r
1444 directly to the client. Until the client issues a <literal>DISCONNECT</literal> message, that
\r
1445 particular service is only available to the requesting client. Stateful connections
\r
1446 are useful for clients that need to make many requests from a particular service,
\r
1447 as it avoids the intermediary step of contacting the router for each request, as
\r
1448 well as for operations that require a controlled sequence of commands, such as a
\r
1449 set of database INSERT, UPDATE, and DELETE statements within a transaction.</simpara>
\r
1452 <simplesect id="_message_body_format">
\r
1453 <title>Message body format</title>
\r
1454 <simpara>OpenSRF was an early adopter of JavaScript Object Notation (JSON). While XMPP
\r
1455 is an XML protocol, the Evergreen developers recognized that the compactness of
\r
1456 the JSON format offered a significant reduction in bandwidth for the volume of
\r
1457 messages that would be generated in an application of that size. In addition,
\r
1458 the ability of languages such as JavaScript, Perl, and Python to generate
\r
1459 native objects with minimal parsing offered an attractive advantage over
\r
1460 invoking an XML parser for every message. Instead, the body of the XMPP message
\r
1461 is a simple JSON structure. For a simple request, like the following example
\r
1462 that simply reverses a string, it looks like a significant overhead: but we get
\r
1463 the advantages of locale support and tracing the request from the requester
\r
1464 through the listener and responder (drone).</simpara>
\r
1465 <formalpara><title>A request for opensrf.simple-text.reverse("foobar"):</title><para>
\r
1466 <programlisting language="xml" linenumbering="unnumbered">
\r
1467 <message from='router@private.localhost/opensrf.simple-text'
\r
1468 to='opensrf@private.localhost/opensrf.simple-text_listener_at_localhost_6275'
\r
1469 router_from='opensrf@private.localhost/_karmic_126678.3719_6288'
\r
1470 router_to='' router_class='' router_command='' osrf_xid=''
\r
1472 <thread>1266781414.366573.12667814146288</thread>
\r
1475 {"__c":"osrfMessage","__p":
\r
1476 {"threadTrace":"1","locale":"en-US","type":"REQUEST","payload":
\r
1477 {"__c":"osrfMethod","__p":
\r
1478 {"method":"opensrf.simple-text.reverse","params":["foobar"]}
\r
1486 </para></formalpara>
\r
1487 <formalpara><title>A response from opensrf.simple-text.reverse("foobar")</title><para>
\r
1488 <programlisting language="xml" linenumbering="unnumbered">
\r
1489 <message from='opensrf@private.localhost/opensrf.simple-text_drone_at_localhost_6285'
\r
1490 to='opensrf@private.localhost/_karmic_126678.3719_6288'
\r
1491 router_command='' router_class='' osrf_xid=''
\r
1493 <thread>1266781414.366573.12667814146288</thread>
\r
1496 {"__c":"osrfMessage","__p":
\r
1497 {"threadTrace":"1","payload":
\r
1498 {"__c":"osrfResult","__p":
\r
1499 {"status":"OK","content":"raboof","statusCode":200}
\r
1500 } ,"type":"RESULT","locale":"en-US"}
\r
1502 {"__c":"osrfMessage","__p":
\r
1503 {"threadTrace":"1","payload":
\r
1504 {"__c":"osrfConnectStatus","__p":
\r
1505 {"status":"Request Complete","statusCode":205}
\r
1506 },"type":"STATUS","locale":"en-US"}
\r
1512 </para></formalpara>
\r
1513 <simpara>The content of the <literal><body></literal> element of the OpenSRF request and result should
\r
1514 look familiar; they match the structure of the <link linkend="OpenSRFOverHTTP">OpenSRF over HTTP examples</link> that we previously dissected.</simpara>
\r
1516 <simplesect id="_registering_opensrf_methods_in_depth">
\r
1517 <title>Registering OpenSRF methods in depth</title>
\r
1518 <simpara>Let’s explore the call to <literal>__PACKAGE__->register_method()</literal>; most of the members
\r
1519 of the hash are optional, and for the sake of brevity we omitted them in the
\r
1520 previous example. As we have seen in the results of the <link linkend="opensrfIntrospection">introspection call</link>, a
\r
1521 verbose registration method call is recommended to better enable the internal
\r
1522 documentation. Here is the complete set of members that you should pass to
\r
1523 <literal>__PACKAGE__->register_method()</literal>:</simpara>
\r
1527 The <literal>method</literal> member specifies the name of the procedure in this module that is being registered as an OpenSRF method.
\r
1532 The <literal>api_name</literal> member specifies the invocable name of the OpenSRF method; by convention, the OpenSRF service name is used as the prefix.
\r
1537 The optional <literal>api_level</literal> member can be used for versioning the methods to allow the use of a deprecated API, but in practical use is always 1.
\r
1542 The optional <literal>argc</literal> member specifies the minimal number of arguments that the method expects.
\r
1547 The optional <literal>stream</literal> member, if set to any value, specifies that the method supports returning multiple values from a single call to
\r
1548 subsequent requests. OpenSRF automatically creates a corresponding method with ".atomic" appended to its name that returns the complete set of results in a
\r
1549 single request. Streaming methods are useful if you are returning hundreds of records and want to act on the results as they return.
\r
1554 The optional <literal>signature</literal> member is a hash that describes the method’s purpose, arguments, and return value.
\r
1559 The <literal>desc</literal> member of the <literal>signature</literal> hash describes the method’s purpose.
\r
1564 The <literal>params</literal> member of the <literal>signature</literal> hash is an array of hashes in which each array element describes the corresponding method
\r
1565 argument in order.
\r
1570 The <literal>name</literal> member of the argument hash specifies the name of the argument.
\r
1575 The <literal>desc</literal> member of the argument hash describes the argument’s purpose.
\r
1580 The <literal>type</literal> member of the argument hash specifies the data type of the argument: for example, string, integer, boolean, number, array, or hash.
\r
1587 The <literal>return</literal> member of the <literal>signature</literal> hash is a hash that describes the return value of the method.
\r
1592 The <literal>desc</literal> member of the <literal>return</literal> hash describes the return value.
\r
1597 The <literal>type</literal> member of the <literal>return</literal> hash specifies the data type of the return value: for example, string, integer, boolean, number,
\r
1608 <section id="_evergreen_specific_opensrf_services">
\r
1609 <title>Evergreen-specific OpenSRF services</title>
\r
1610 <simpara>Evergreen is currently the primary showcase for the use of OpenSRF as an
\r
1611 application architecture. Evergreen 1.6.1 includes the following
\r
1612 set of OpenSRF services:</simpara>
\r
1616 The <systemitem class="service">open-ils.actor</systemitem> service supports common tasks for working with user
\r
1617 accounts and libraries.
\r
1622 The <systemitem class="service">open-ils.auth</systemitem> service supports authentication of Evergreen users.
\r
1627 The <systemitem class="service">open-ils.booking</systemitem> service supports the management of reservations
\r
1628 for bookable items.
\r
1633 The <systemitem class="service">open-ils.cat</systemitem> service supports common cataloging tasks, such as
\r
1634 creating, modifying, and merging bibliographic and authority records.
\r
1639 The <systemitem class="service">open-ils.circ</systemitem> service supports circulation tasks such as checking
\r
1640 out items and calculating due dates.
\r
1645 The <systemitem class="service">open-ils.collections</systemitem> service supports tasks that assist collections
\r
1646 agencies in contacting users with outstanding fines above a certain
\r
1652 The <systemitem class="service">open-ils.cstore</systemitem> private service supports unrestricted access to
\r
1653 Evergreen fieldmapper objects.
\r
1658 The <systemitem class="service">open-ils.ingest</systemitem> private service supports tasks for importing
\r
1659 data such as bibliographic and authority records.
\r
1664 The <systemitem class="service">open-ils.pcrud</systemitem> service supports permission-based access to Evergreen
\r
1665 fieldmapper objects.
\r
1670 The <systemitem class="service">open-ils.penalty</systemitem> penalty service supports the calculation of
\r
1671 penalties for users, such as being blocked from further borrowing, for
\r
1672 conditions such as having too many items checked out or too many unpaid
\r
1678 The <systemitem class="service">open-ils.reporter</systemitem> service supports the creation and scheduling of
\r
1684 The <systemitem class="service">open-ils.reporter-store</systemitem> private service supports access to Evergreen
\r
1685 fieldmapper objects for the reporting service.
\r
1690 The <systemitem class="service">open-ils.search</systemitem> service supports searching across bibliographic
\r
1691 records, authority records, serial records, Z39.50 sources, and ZIP codes.
\r
1696 The <systemitem class="service">open-ils.storage</systemitem> private service supports a deprecated method of
\r
1697 providing access to Evergreen fieldmapper objects. Implemented in Perl,
\r
1698 this service has largely been replaced by the much faster C-based
\r
1699 <literal>open-ils.cstore</literal> service.
\r
1704 The <systemitem class="service">open-ils.supercat</systemitem> service supports transforms of MARC records into
\r
1705 other formats, such as MODS, as well as providing Atom and RSS feeds and
\r
1711 The <systemitem class="service">open-ils.trigger</systemitem> private service supports event-based triggers for
\r
1712 actions such as overdue and holds available notification emails.
\r
1717 The <systemitem class="service">open-ils.vandelay</systemitem> service supports the import and export of batches of
\r
1718 bibliographic and authority records.
\r
1722 <simpara>Of some interest is that the <systemitem class="service">open-ils.reporter-store</systemitem> and <systemitem class="service">open-ils.cstore</systemitem>
\r
1723 services have identical implementations. Surfacing them as separate services
\r
1724 enables a deployer of Evergreen to ensure that the reporting service does not
\r
1725 interfere with the performance-critical <systemitem class="service">open-ils.cstore</systemitem> service. One can also
\r
1726 direct the reporting service to a read-only database replica to, again, avoid
\r
1727 interference with <systemitem class="service">open-ils.cstore</systemitem> which must write to the master database.</simpara>
\r
1728 <simpara>There are only a few significant services that are not built on OpenSRF in
\r
1729 Evergreen 1.6.0, such as the SIP and Z39.50 servers. These services implement
\r
1730 different protocols and build on existing daemon architectures (Simple2ZOOM
\r
1731 for Z39.50), but still rely on the other OpenSRF services to provide access
\r
1732 to the Evergreen data. The non-OpenSRF services are reasonably self-contained
\r
1733 and can be deployed on different servers to deliver the same sort of deployment
\r
1734 flexibility as OpenSRF services, but have the disadvantage of not being
\r
1735 integrated into the same configuration and control infrastructure as the
\r
1736 OpenSRF services.</simpara>
\r