1 Installing the Evergreen server
2 ===============================
6 Preamble: referenced user accounts
7 ----------------------------------
9 In subsequent sections, we will refer to a number of different accounts, as
12 * Linux user accounts:
13 ** The *user* Linux account is the account that you use to log onto the
14 Linux system as a regular user.
15 ** The *root* Linux account is an account that has system administrator
16 privileges. On Debian you can switch to this account from
17 your *user* account by issuing the `su -` command and entering the
18 password for the *root* account when prompted. On Ubuntu you can switch
19 to this account from your *user* account using the `sudo su -` command
20 and entering the password for your *user* account when prompted.
21 ** The *opensrf* Linux account is an account that you create when installing
22 OpenSRF. You can switch to this account from the *root* account by
23 issuing the `su - opensrf` command.
24 ** The *postgres* Linux account is created automatically when you install
25 the PostgreSQL database server. You can switch to this account from the
26 *root* account by issuing the `su - postgres` command.
27 * PostgreSQL user accounts:
28 ** The *evergreen* PostgreSQL account is a superuser account that you will
29 create to connect to the PostgreSQL database server.
30 * Evergreen administrator account:
31 ** The *egadmin* Evergreen account is an administrator account for
32 Evergreen that you will use to test connectivity and configure your
35 Preamble: developer instructions
36 --------------------------------
39 Skip this section if you are using an official release tarball downloaded
40 from http://evergreen-ils.org/egdownloads
42 Developers working directly with the source code from the Git repository,
43 rather than an official release tarball, must perform one step before they
44 can proceed with the `./configure` step.
46 As the *user* Linux account, issue the following command in the Evergreen
47 source directory to generate the configure script and Makefiles:
50 ------------------------------------------------------------------------------
52 ------------------------------------------------------------------------------
54 Installing prerequisites
55 ------------------------
57 * **PostgreSQL**: The minimum supported version is 9.4.
58 * **Linux**: Evergreen has been tested on Debian Stretch (9),
59 Debian Jessie (8), Debian Wheezy (7), Ubuntu Xenial Xerus (16.04),
60 and Ubuntu Trusty Tahr (14.04).
61 If you are running an older version of these distributions, you may want
62 to upgrade before upgrading Evergreen. For instructions on upgrading these
63 distributions, visit the Debian or Ubuntu websites.
64 * **OpenSRF**: The minimum supported version of OpenSRF is 3.0.0.
67 Evergreen has a number of prerequisite packages that must be installed
68 before you can successfully configure, compile, and install Evergreen.
70 1. Begin by installing the most recent version of OpenSRF (3.0.0 or later).
71 You can download OpenSRF releases from http://evergreen-ils.org/opensrf-downloads/
72 2. On some distributions, it is necessary to install PostgreSQL 9.4+ from external
75 * Debian (Wheezy) and Ubuntu (Trusty) comes with older versions of
76 PostgreSQL, so steps are taken to automatically utilize the
77 PostgreSQL community's apt sources.
78 (For complete details, see: https://wiki.postgresql.org/wiki/Apt)
79 * Debian (Jessie/Stretch) and Ubuntu (Xenial) comes with PostgreSQL 9.4+,
80 so no additional steps are required.
82 3. Issue the following commands as the *root* Linux account to install
83 prerequisites using the `Makefile.install` prerequisite installer,
84 substituting `debian-stretch`, `debian-jessie`, `debian-wheezy`,
85 `ubuntu-xenial`, or `ubuntu-trusty` for <osname> below:
88 ------------------------------------------------------------------------------
89 make -f Open-ILS/src/extras/Makefile.install <osname>
90 ------------------------------------------------------------------------------
92 4. Add the libdbi-libdbd libraries to the system dynamic library path by
93 issuing the following commands as the *root* Linux account:
96 You should skip this step if installing on Ubuntu Trusty/Xenial or Debian Jessie/Stretch. The Ubuntu
97 and Debian Jessie/Stretch targets use libdbd-pgsql from packages.
101 ------------------------------------------------------------------------------
102 echo "/usr/local/lib/dbd" > /etc/ld.so.conf.d/eg.conf
104 ------------------------------------------------------------------------------
106 5. OPTIONAL: Developer additions
108 To perform certain developer tasks from a Git source code checkout,
109 additional packages may be required. As the *root* Linux account:
111 * To install packages needed for retrieving and managing web dependencies,
112 use the <osname>-developer Makefile.install target. Currently,
113 this is only needed for building and installing the (preview) browser
117 ------------------------------------------------------------------------------
118 make -f Open-ILS/src/extras/Makefile.install <osname>-developer
119 ------------------------------------------------------------------------------
121 * To install packages required for building Evergreen translations, use
122 the <osname>-translator Makefile.install target.
125 ------------------------------------------------------------------------------
126 make -f Open-ILS/src/extras/Makefile.install <osname>-translator
127 ------------------------------------------------------------------------------
129 * To install packages required for building Evergreen release bundles, use
130 the <osname>-packager Makefile.install target.
133 ------------------------------------------------------------------------------
134 make -f Open-ILS/src/extras/Makefile.install <osname>-packager
135 ------------------------------------------------------------------------------
137 Extra steps for web staff client
138 --------------------------------
141 Skip this entire section if you are using an official release tarball downloaded
142 from http://evergreen-ils.org/downloads
144 Install dependencies for web staff client
145 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
148 You may skip this section if you have installed the previously described
149 'Optional: Developer Additions'. You will still need to do the following
150 steps in <<install_files_for_web_staff_client,Install files for web staff client>>.
152 1. Install the long-term stability (LTS) release of
153 https://nodejs.org[Node.js]. Add the Node.js `/bin` directory to your
154 environment variable `PATH`.
159 ------------------------------------------------------------------------------
160 % sudo npm install -g grunt-cli
161 ------------------------------------------------------------------------------
163 [[install_files_for_web_staff_client]]
164 Install files for web staff client
165 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
167 1. Building, Testing, Minification: The remaining steps all take place within
168 the staff JS web root:
171 ------------------------------------------------------------------------------
172 cd $EVERGREEN_ROOT/Open-ILS/web/js/ui/default/staff/
173 ------------------------------------------------------------------------------
175 2. Install Project-local Dependencies. npm inspects the 'package.json' file
176 for dependencies and fetches them from the Node package network.
179 ------------------------------------------------------------------------------
180 npm install # fetch JS dependencies
181 ------------------------------------------------------------------------------
183 3. Run the build script.
186 ------------------------------------------------------------------------------
187 # build, run tests, concat+minify
189 ------------------------------------------------------------------------------
192 Configuration and compilation instructions
193 ------------------------------------------
195 For the time being, we are still installing everything in the `/openils/`
196 directory. From the Evergreen source directory, issue the following commands as
197 the *user* Linux account to configure and build Evergreen:
200 ------------------------------------------------------------------------------
201 PATH=/openils/bin:$PATH ./configure --prefix=/openils --sysconfdir=/openils/conf
203 ------------------------------------------------------------------------------
205 These instructions assume that you have also installed OpenSRF under `/openils/`.
206 If not, please adjust PATH as needed so that the Evergreen `configure` script
207 can find `osrf_config`.
209 Installation instructions
210 -------------------------
212 1. Once you have configured and compiled Evergreen, issue the following
213 command as the *root* Linux account to install Evergreen, build the server
214 portion of the staff client, and copy example configuration files to
216 Change the value of the `STAFF_CLIENT_STAMP_ID` variable to match the version
217 of the staff client that you will use to connect to the Evergreen server.
220 ------------------------------------------------------------------------------
221 make STAFF_CLIENT_STAMP_ID=rel_name install
222 ------------------------------------------------------------------------------
224 2. The server portion of the staff client expects `http://hostname/xul/server`
225 to resolve. Issue the following commands as the *root* Linux account to
226 create a symbolic link pointing to the `server` subdirectory of the server
227 portion of the staff client that we just built using the staff client ID
231 ------------------------------------------------------------------------------
232 cd /openils/var/web/xul
233 ln -sf rel_name/server server
234 ------------------------------------------------------------------------------
236 Change ownership of the Evergreen files
237 ---------------------------------------
239 All files in the `/openils/` directory and subdirectories must be owned by the
240 `opensrf` user. Issue the following command as the *root* Linux account to
241 change the ownership on the files:
244 ------------------------------------------------------------------------------
245 chown -R opensrf:opensrf /openils
246 ------------------------------------------------------------------------------
251 On Debian Stretch, run the following command as the root user:
254 ------------------------------------------------------------------------------
256 ------------------------------------------------------------------------------
258 Additional Instructions for Developers
259 --------------------------------------
262 Skip this section if you are using an official release tarball downloaded
263 from http://evergreen-ils.org/egdownloads
265 Developers working directly with the source code from the Git repository,
266 rather than an official release tarball, need to install the Dojo Toolkit
267 set of JavaScript libraries. The appropriate version of Dojo is included in
268 Evergreen release tarballs. Developers should install the Dojo 1.3.3 version
269 of Dojo by issuing the following commands as the *opensrf* Linux account:
272 ------------------------------------------------------------------------------
273 wget http://download.dojotoolkit.org/release-1.3.3/dojo-release-1.3.3.tar.gz
274 tar -C /openils/var/web/js -xzf dojo-release-1.3.3.tar.gz
275 cp -r /openils/var/web/js/dojo-release-1.3.3/* /openils/var/web/js/dojo/.
276 ------------------------------------------------------------------------------
279 Configure the Apache Web server
280 -------------------------------
282 . Use the example configuration files in `Open-ILS/examples/apache/` (for
283 Apache versions below 2.4) or `Open-ILS/examples/apache_24/` (for Apache
284 versions 2.4 or greater) to configure your Web server for the Evergreen
285 catalog, staff client, Web services, and administration interfaces. Issue the
286 following commands as the *root* Linux account:
290 ------------------------------------------------------------------------------
291 cp Open-ILS/examples/apache/eg.conf /etc/apache2/sites-available/
292 cp Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/
293 cp Open-ILS/examples/apache/eg_startup /etc/apache2/
295 mkdir /etc/apache2/ssl
297 ------------------------------------------------------------------------------
299 .Ubuntu Trusty/Xenial and Debian Jessie/Stretch
301 ------------------------------------------------------------------------------------
302 cp Open-ILS/examples/apache_24/eg_24.conf /etc/apache2/sites-available/eg.conf
303 cp Open-ILS/examples/apache_24/eg_vhost_24.conf /etc/apache2/eg_vhost.conf
304 cp Open-ILS/examples/apache/eg_startup /etc/apache2/
306 mkdir /etc/apache2/ssl
308 ------------------------------------------------------------------------------------
310 . The `openssl` command cuts a new SSL key for your Apache server. For a
311 production server, you should purchase a signed SSL certificate, but you can
312 just use a self-signed certificate and accept the warnings in the staff client
313 and browser during testing and development. Create an SSL key for the Apache
314 server by issuing the following command as the *root* Linux account:
317 ------------------------------------------------------------------------------
318 openssl req -new -x509 -days 365 -nodes -out server.crt -keyout server.key
319 ------------------------------------------------------------------------------
321 . As the *root* Linux account, edit the `eg.conf` file that you copied into
323 a. To enable access to the offline upload / execute interface from any
324 workstation on any network, make the following change (and note that
325 you *must* secure this for a production instance):
326 * (Apache 2.2): Replace `Allow from 10.0.0.0/8` with `Allow from all`
327 * (Apache 2.4): Replace `Require host 10.0.0.0/8` with `Require all granted`
328 . Change the user for the Apache server.
329 * (Debian and Ubuntu): As the *root* Linux account, edit
330 `/etc/apache2/envvars`. Change `export APACHE_RUN_USER=www-data` to
331 `export APACHE_RUN_USER=opensrf`.
332 . As the *root* Linux account, configure Apache with KeepAlive settings
333 appropriate for Evergreen. Higher values can improve the performance of a
334 single client by allowing multiple requests to be sent over the same TCP
335 connection, but increase the risk of using up all available Apache child
336 processes and memory.
337 * (Debian and Ubuntu): Edit `/etc/apache2/apache2.conf`.
338 a. Change `KeepAliveTimeout` to `1`.
339 b. Change `MaxKeepAliveRequests` to `100`.
340 . As the *root* Linux account, configure the prefork module to start and keep
341 enough Apache servers available to provide quick responses to clients without
342 running out of memory. The following settings are a good starting point for a
343 site that exposes the default Evergreen catalogue to the web:
345 .Debian Wheezy (`/etc/apache2/apache2.conf`)
347 ------------------------------------------------------------------------------
348 <IfModule mpm_prefork_module>
353 MaxRequestsPerChild 500
355 ------------------------------------------------------------------------------
357 .Ubuntu Trusty/Xenial, Debian Jessie/Stretch (`/etc/apache2/mods-available/mpm_prefork.conf`)
359 ------------------------------------------------------------------------------
360 <IfModule mpm_prefork_module>
365 MaxConnectionsPerChild 500
367 ------------------------------------------------------------------------------
369 . (Ubuntu Trusty/Xenial, Debian Jessie/Stretch) As the *root* user,
370 enable the mpm_prefork module:
373 ------------------------------------------------------------------------------
376 ------------------------------------------------------------------------------
378 . (Debian Wheezy): As the *root* Linux account, enable the Evergreen site:
381 ------------------------------------------------------------------------------
382 a2dissite default # OPTIONAL: disable the default site (the "It Works" page)
384 ------------------------------------------------------------------------------
386 (Ubuntu Trusty/Xenial, Debian Jessie/Stretch):
389 ------------------------------------------------------------------------------
390 a2dissite 000-default # OPTIONAL: disable the default site (the "It Works" page)
392 ------------------------------------------------------------------------------
394 . (Debian and Ubuntu): As the *root* Linux account, enable Apache to write
395 to the lock directory; this is currently necessary because Apache
396 is running as the `opensrf` user:
399 ------------------------------------------------------------------------------
400 chown opensrf /var/lock/apache2
401 ------------------------------------------------------------------------------
403 Learn more about additional Apache options in the following sections:
405 * <<_apache_rewrite_tricks,Apache Rewrite Tricks>>
406 * <<_apache_access_handler_perl_module,Apache Access Handler Perl Module>>
408 Configure OpenSRF for the Evergreen application
409 -----------------------------------------------
410 There are a number of example OpenSRF configuration files in `/openils/conf/`
411 that you can use as a template for your Evergreen installation. Issue the
412 following commands as the *opensrf* Linux account:
415 ------------------------------------------------------------------------------
416 cp -b /openils/conf/opensrf_core.xml.example /openils/conf/opensrf_core.xml
417 cp -b /openils/conf/opensrf.xml.example /openils/conf/opensrf.xml
418 ------------------------------------------------------------------------------
420 When you installed OpenSRF, you created four Jabber users on two
421 separate domains and edited the `opensrf_core.xml` file accordingly. Please
422 refer back to the OpenSRF README and, as the *opensrf* Linux account, edit the
423 Evergreen version of the `opensrf_core.xml` file using the same Jabber users
424 and domains as you used while installing and testing OpenSRF.
427 The `-b` flag tells the `cp` command to create a backup version of the
428 destination file. The backup version of the destination file has a tilde (`~`)
429 appended to the file name, so if you have forgotten the Jabber users and
430 domains, you can retrieve the settings from the backup version of the files.
432 `eg_db_config`, described in <<_creating_the_evergreen_database,Creating the Evergreen
433 database>>, sets the database connection information in `opensrf.xml` for you.
435 Configure action triggers for the Evergreen application
436 -------------------------------------------------------
437 _Action Triggers_ provide hooks for the system to perform actions when a given
438 event occurs; for example, to generate reminder or overdue notices, the
439 `checkout.due` hook is processed and events are triggered for potential actions
440 if there is no checkin time.
442 To enable the default set of hooks, issue the following command as the
443 *opensrf* Linux account:
446 ------------------------------------------------------------------------------
447 cp -b /openils/conf/action_trigger_filters.json.example /openils/conf/action_trigger_filters.json
448 ------------------------------------------------------------------------------
450 For more information about configuring and running action triggers, see
451 <<_processing_action_triggers,Notifications / Action Triggers>>.
453 Creating the Evergreen database
454 -------------------------------
456 Setting up the PostgreSQL server
457 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
459 For production use, most libraries install the PostgreSQL database server on a
460 dedicated machine. Therefore, by default, the `Makefile.install` prerequisite
461 installer does *not* install the PostgreSQL 9 database server that is required
462 by every Evergreen system. You can install the packages required by Debian or
463 Ubuntu on the machine of your choice using the following commands as the
464 *root* Linux account:
466 .(Debian / Ubuntu) Installing PostgreSQL server packages
468 Each OS build target provides the postgres server installation packages
469 required for each operating system. To install Postgres server packages,
470 use the make target 'postgres-server-<OSTYPE>'. Choose the most appropriate
471 command below based on your operating system.
474 ------------------------------------------------------------------------------
475 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-stretch
476 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-jessie
477 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-wheezy
478 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-trusty
479 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-xenial
480 ------------------------------------------------------------------------------
482 For a standalone PostgreSQL server, install the following Perl modules for your
483 distribution as the *root* Linux account:
486 No extra modules required for these distributions.
488 You need to create a PostgreSQL superuser to create and access the database.
489 Issue the following command as the *postgres* Linux account to create a new
490 PostgreSQL superuser named `evergreen`. When prompted, enter the new user's
494 ------------------------------------------------------------------------------
495 createuser -s -P evergreen
496 ------------------------------------------------------------------------------
498 .Enabling connections to the PostgreSQL database
500 Your PostgreSQL database may be configured by default to prevent connections,
501 for example, it might reject attempts to connect via TCP/IP or from other
502 servers. To enable TCP/IP connections from localhost, check your `pg_hba.conf`
503 file, found in the `/etc/postgresql/` directory on Debian and Ubuntu.
504 A simple way to enable TCP/IP
505 connections from localhost to all databases with password authentication, which
506 would be suitable for a test install of Evergreen on a single server, is to
507 ensure the file contains the following entries _before_ any "host ... ident"
510 ------------------------------------------------------------------------------
511 host all all ::1/128 md5
512 host all all 127.0.0.1/32 md5
513 ------------------------------------------------------------------------------
515 When you change the `pg_hba.conf` file, you will need to reload PostgreSQL to
516 make the changes take effect. For more information on configuring connectivity
518 http://www.postgresql.org/docs/devel/static/auth-pg-hba-conf.html
520 Creating the Evergreen database and schema
521 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
523 Once you have created the *evergreen* PostgreSQL account, you also need to
524 create the database and schema, and configure your configuration files to point
525 at the database server. Issue the following command as the *root* Linux account
526 from inside the Evergreen source directory, replacing <user>, <password>,
527 <hostname>, <port>, and <dbname> with the appropriate values for your
528 PostgreSQL database (where <user> and <password> are for the *evergreen*
529 PostgreSQL account you just created), and replace <admin-user> and <admin-pass>
530 with the values you want for the *egadmin* Evergreen administrator account:
533 ------------------------------------------------------------------------------
534 perl Open-ILS/src/support-scripts/eg_db_config --update-config \
535 --service all --create-database --create-schema --create-offline \
536 --user <user> --password <password> --hostname <hostname> --port <port> \
537 --database <dbname> --admin-user <admin-user> --admin-pass <admin-pass>
538 ------------------------------------------------------------------------------
540 This creates the database and schema and configures all of the services in
541 your `/openils/conf/opensrf.xml` configuration file to point to that database.
542 It also creates the configuration files required by the Evergreen `cgi-bin`
543 administration scripts, and sets the user name and password for the *egadmin*
544 Evergreen administrator account to your requested values.
546 You can get a complete set of options for `eg_db_config` by passing the
551 If you add the `--load-all-sample` parameter to the `eg_db_config` command,
552 a set of authority and bibliographic records, call numbers, copies, staff
553 and regular users, and transactions will be loaded into your target
554 database. This sample dataset is commonly referred to as the _concerto_
555 sample data, and can be useful for testing out Evergreen functionality and
556 for creating problem reports that developers can easily recreate with their
557 own copy of the _concerto_ sample data.
559 Creating the database on a remote server
560 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
561 In a production instance of Evergreen, your PostgreSQL server should be
562 installed on a dedicated server.
564 PostgreSQL 9.4 and later
565 ^^^^^^^^^^^^^^^^^^^^^^^^
566 To create the database instance on a remote database server running PostgreSQL
567 9.4 or later, simply use the `--create-database` flag on `eg_db_config`.
571 1. As the *root* Linux account, start the `memcached` and `ejabberd` services
572 (if they aren't already running):
575 ------------------------------------------------------------------------------
576 /etc/init.d/ejabberd start
577 /etc/init.d/memcached start
578 ------------------------------------------------------------------------------
580 2. As the *opensrf* Linux account, start Evergreen. The `-l` flag in the
581 following command is only necessary if you want to force Evergreen to treat the
582 hostname as `localhost`; if you configured `opensrf.xml` using the real
583 hostname of your machine as returned by `perl -ENet::Domain 'print
584 Net::Domain::hostfqdn() . "\n";'`, you should not use the `-l` flag.
587 ------------------------------------------------------------------------------
588 osrf_control -l --start-all
589 ------------------------------------------------------------------------------
591 ** If you receive the error message `bash: osrf_control: command not found`,
592 then your environment variable `PATH` does not include the `/openils/bin`
593 directory; this should have been set in the *opensrf* Linux account's
594 `.bashrc` configuration file. To manually set the `PATH` variable, edit the
595 configuration file `~/.bashrc` as the *opensrf* Linux account and add the
599 ------------------------------------------------------------------------------
600 export PATH=$PATH:/openils/bin
601 ------------------------------------------------------------------------------
603 3. As the *opensrf* Linux account, generate the Web files needed by the staff
604 client and catalogue and update the organization unit proximity (you need to do
605 this the first time you start Evergreen, and after that each time you change the library org unit configuration.
609 ------------------------------------------------------------------------------
611 ------------------------------------------------------------------------------
613 4. As the *root* Linux account, restart the Apache Web server:
616 ------------------------------------------------------------------------------
617 /etc/init.d/apache2 restart
618 ------------------------------------------------------------------------------
620 If the Apache Web server was running when you started the OpenSRF services, you
621 might not be able to successfully log in to the OPAC or staff client until the
622 Apache Web server is restarted.
624 Testing connections to Evergreen
625 --------------------------------
627 Once you have installed and started Evergreen, test your connection to
628 Evergreen via `srfsh`. As the *opensrf* Linux account, issue the following
629 commands to start `srfsh` and try to log onto the Evergreen server using the
630 *egadmin* Evergreen administrator user name and password that you set using the
631 `eg_db_config` command:
634 ------------------------------------------------------------------------------
636 srfsh% login <admin-user> <admin-pass>
637 ------------------------------------------------------------------------------
639 You should see a result like:
641 Received Data: "250bf1518c7527a03249858687714376"
642 ------------------------------------
643 Request Completed Successfully
644 Request Time in seconds: 0.045286
645 ------------------------------------
649 "textcode":"SUCCESS",
652 "stacktrace":"oils_auth.c:304",
654 "authtoken":"e5f9827cc0f93b503a1cc66bee6bdd1a",
660 ------------------------------------
661 Request Completed Successfully
662 Request Time in seconds: 1.336568
663 ------------------------------------
664 [[install-troubleshooting-1]]
665 If this does not work, it's time to do some troubleshooting.
667 * As the *opensrf* Linux account, run the `settings-tester.pl` script to see
668 if it finds any system configuration problems. The script is found at
669 `Open-ILS/src/support-scripts/settings-tester.pl` in the Evergreen source
671 * Follow the steps in the http://evergreen-ils.org/dokuwiki/doku.php?id=troubleshooting:checking_for_errors[troubleshooting guide].
672 * If you have faithfully followed the entire set of installation steps
673 listed here, you are probably extremely close to a working system.
674 Gather your configuration files and log files and contact the
675 http://evergreen-ils.org/communicate/mailing-lists/[Evergreen development
676 mailing list] for assistance before making any drastic changes to your system
682 Need help installing or using Evergreen? Join the mailing lists at
683 http://evergreen-ils.org/communicate/mailing-lists/ or contact us on the Freenode
684 IRC network on the #evergreen channel.
688 This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
689 Unported License. To view a copy of this license, visit
690 http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative
691 Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.