2 * App to drive the offline UI
7 angular.module('egOffline', ['ngRoute', 'ui.bootstrap', 'egCoreMod', 'egUiMod', 'ngToast', 'tableSort'])
10 ['$routeProvider','$locationProvider','$compileProvider',
11 function($routeProvider , $locationProvider , $compileProvider) {
13 $locationProvider.html5Mode(true);
14 $compileProvider.aHrefSanitizationWhitelist(/^\s*(https?|blob):/);
17 * Route resolvers allow us to run async commands
18 * before the page controller is instantiated.
20 var resolver = {delay : ['egCore',
22 return egCore.startup.go();
26 $routeProvider.when('/offline-interface/:tab', {
27 templateUrl: 'offline-template',
28 controller: 'OfflineCtrl',
33 $routeProvider.otherwise({
34 templateUrl : 'offline-template',
35 controller : 'OfflineCtrl',
40 .controller('OfflineSessionCtrl',
41 ['$scope','$window','egCore','$routeParams','$http','$q','$timeout','egPromptDialog','ngToast','egProgressDialog',
42 function($scope , $window , egCore , $routeParams , $http , $q , $timeout , egPromptDialog , ngToast , egProgressDialog) {
43 $scope.active_session_tab = 'pending';
45 $scope.lookupNoncatTypeName = function (type) {
46 var nc = $scope.noncats.filter(function(n){ return n.id() == type })[0];
47 if (nc) return nc.name();
51 $scope.createDate = function (ts, epoch) {
53 if (epoch) ts = ts * 1000;
57 $scope.setSession = function (s, ind) {
58 $scope.current_session = s;
59 $scope.current_session_index = ind;
61 return $scope.refreshExceptions(s);
64 $scope.createSession = function () {
66 return egPromptDialog.open(
67 egCore.strings.OFFLINE_SESSION_DESC, '',
68 {ok : function(value) {
71 return $http.get(formURL({action:'create',desc:value})).then(function(res) {
72 if (res.data.ilsevent == "0") return $q.when(res.data.payload);
74 }).then(function (seskey) {
75 return $scope.refreshSessions().then(function() {
77 var s = $scope.sessions.filter(function(s){ s.key == seskey })[0];
78 var ind = $scope.sessions.length - 1; // sorted by create time, so new one is last
79 return $scope.setSession(s, ind);
83 ngToast.warning(egCore.strings.OFFLINE_SESSION_CREATE_FAILED);
90 $scope.processSession = function (s, ind) {
91 return $scope.setSession(s, ind).then(function() {
92 egProgressDialog.open();
95 formURL({action:'execute',seskey:$scope.current_session.key})
96 ).then(function(res) {
97 if (res.data.ilsevent == "0") return $q.when(res.data.payload);
100 egProgressDialog.close();
101 return $scope.refreshSessions()
102 .then(function(){ return $scope.refreshExceptions(s) });
104 egProgressDialog.close();
105 return $scope.refreshSessions().then(function() {
106 ngToast.warning(egCore.strings.OFFLINE_SESSION_PROCESSING_FAILED);
112 $scope.refreshExceptions = function (s) {
116 status_type : 'exceptions',
119 ).then(function(res) {
120 if (res.data.ilsevent) {
121 $scope.current_session.exceptions = [];
123 $scope.current_session.exceptions = res.data;
129 $scope.refreshSessions = function () {
131 return $http.get(formURL({action:'status',status_type:'sessions'})).then(function(res) {
133 $scope.sessions = res.data;
138 var creator_list = [$q.when()];
139 angular.forEach($scope.sessions, function (s) {
141 s.org = egCore.org.get(s.org).shortname();
142 creator_list.push(egCore.pcrud.retrieve('au',s.creator).then(function(u) {
143 s.creator = u.family_name();
145 angular.forEach(s.scripts, function(sc) {
150 return $q.all(creator_list);
154 $scope.reprintLast = function () {
155 egCore.print.reprintLast();
159 $scope.uploadPending = function (s, ind) {
160 return $scope.setSession(s, ind).then(function() {
162 egProgressDialog.open();
163 return $scope.createOfflineXactBlob().then(function(blob) {
165 var form = new FormData();
166 form.append("ses", egCore.auth.token());
167 form.append("org", $scope.org.id());
168 form.append("ws", $scope.current_workstation_name());
169 form.append("wc", 1);
170 form.append("action", "load");
171 form.append("seskey", $scope.current_session.key);
172 form.append("file", blob, "file");
175 '/cgi-bin/offline/offline.pl?' + new Date().getTime(),
178 transformRequest: angular.identity,
179 headers: {'Content-Type': undefined}
181 ).then(function(res) {
182 egProgressDialog.close();
183 if (res.data.ilsevent == "0") {
184 return $scope.clear_pending(true).then(function() {
185 return $scope.refreshSessions();
188 ngToast.warning(egCore.strings.OFFLINE_SESSION_UPLOAD_FAILED);
189 return $scope.refreshSessions();
191 },function () { egProgressDialog.close() });
196 $scope.retrieveDetails = function (x) {
197 alert(JSON.stringify(x, null, 2)); // egAlertDialog kills pretty printing
200 $scope.retrieveItem = function (bc) {
201 return egCore.pcrud.search('acp',{deleted: 'f', barcode: bc}).then(function(copy) {
204 egCore.env.basePath +
205 '/cat/item/' + copy.id(),
210 ngToast.warning(egCore.strings.ITEM_NOT_FOUND);
214 $scope.retrievePatron = function (bc) {
215 return egCore.pcrud.search('ac',{barcode: bc}).then(function(card) {
218 egCore.env.basePath +
219 '/circ/patron/' + card.usr() + '/checkout',
224 ngToast.warning(egCore.strings.PATRON_NOT_FOUND);
228 function formURL (params) {
229 var url = '/cgi-bin/offline/offline.pl?' + new Date().getTime();
232 org : $scope.org ? $scope.org.id() : null,
233 ws : $scope.current_workstation_name(),
235 ses : egCore.auth.token()
238 angular.extend(params, defaults)
241 for (var k in params) {
242 url += '&' + k + '=' + window.encodeURIComponent(params[k]);
247 $scope.$watch('org',function(n){if (n) $scope.refreshSessions()});
252 .controller('OfflineCtrl',
253 ['$q','$scope','$window','$location','$rootScope','egCore','egLovefield','$routeParams','$timeout','$http','ngToast','egConfirmDialog','egUnloadPrompt',
254 function($q , $scope , $window , $location , $rootScope , egCore , egLovefield , $routeParams , $timeout , $http , ngToast , egConfirmDialog , egUnloadPrompt) {
256 // Immediately redirect if we're really offline
257 if (!$window.navigator.onLine) {
258 if ($location.path().match(/session$/)) {
259 var path = $location.path();
260 console.log('internal redirect');
261 return $location.path(path.replace('session','checkout'));
265 var today = new Date();
269 today.setMilliseconds(0);
271 $scope.minDate = today;
272 $scope.blocked_patron = null;
273 $scope.bad_barcode = null;
274 $scope.barcode_type = 'barcode';
275 $scope.focusMe = true;
276 $scope.shared = { outOfRange : false, due_date : null, due_date_offset : '' };
277 $scope.workstation_obj = null;
278 $scope.workstation = '';
279 $scope.workstation_owner = '';
280 $scope.workstations = [];
282 $scope.do_print = Boolean($scope.active_tab == 'checkout');
283 $scope.do_print_changed = false;
284 $scope.printed = false;
286 $scope.imported_pending_xacts = { data : '' };
288 $scope.xact_page = { checkin:[], checkout:[], renew:[], in_house_use:[] };
289 $scope.all_xact = [];
292 $scope.checkout = { noncat_type : '' };
293 $scope.renew = { noncat_type : '' };
294 $scope.in_house_use = {count : 1};
295 $scope.checkin = { backdate : new Date() };
297 $scope.current_workstation_owning_lib = function () {
298 return $scope.workstations.filter(function(w) {
299 return $scope.workstation == w.id
303 $scope.current_workstation_name = function () {
304 return $scope.workstations.filter(function(w) {
305 return $scope.workstation == w.id
309 $scope.$watch('workstation', function (n,o) {
311 $scope.org = egCore.org.get($scope.current_workstation_owning_lib());
314 $scope.changeCheck = function () {
315 $scope.strict_barcode = !$scope.strict_barcode;
316 $scope.do_check_changed = true;
317 egCore.hatch.setItem('eg.offline.strict_barcode', $scope.strict_barcode)
320 $scope.changePrint = function () {
321 $scope.do_print = !$scope.do_print;
322 $scope.do_print_changed = true;
323 egCore.hatch.setItem('eg.offline.print_receipt', $scope.do_print)
326 $scope.logged_in = egCore.auth.token() ? true : false;
329 $scope.active_tab = $routeParams.tab;
331 if (!$scope.logged_in) {
332 $scope.active_tab = 'checkout';
334 $scope.active_tab = 'session';
338 egCore.hatch.getItem('eg.offline.print_receipt')
339 .then(function(setting) {
340 $scope.do_print = setting;
341 if (setting !== undefined) $scope.do_print_changed = true;
344 egCore.hatch.getItem('eg.offline.strict_barcode')
345 .then(function(setting) {
346 $scope.strict_barcode = setting;
347 if (setting !== undefined) $scope.do_check_changed = true;
350 egCore.hatch.getItem('eg.workstation.all')
351 .then(function(all) {
352 if (all && all.length) {
353 $scope.workstations = all;
355 if (ws = $location.search().ws) {
356 // user requested a workstation via URL
357 var match = all.filter(
358 function(w) {return ws == w.name} )[0];
361 // requested WS registered on this client
362 $scope.workstation = match.id;
364 // the requested WS is not registered on this client
365 $scope.wsNotRegistered = true;
368 // no workstation requested; use the default
369 egCore.hatch.getItem('eg.workstation.default')
371 var ws_obj = all.filter(function(w) {
375 $scope.workstation_obj = ws_obj;
376 $scope.workstation = ws_obj.id;
377 $scope.workstation_owner = ws_obj.owning_lib;
379 return egLovefield.reconstituteList('cnct').then(function () {
380 $scope.noncats = egCore.env.cnct.list;
387 $scope.downloadBlockList = function () {
388 var url = '/standalone/list.txt?ses='
389 + egCore.auth.token()
390 + '&' + new Date().getTime();
391 return $http.get(url).then(
394 var lines = res.data.split('\n');
395 egLovefield.destroyOfflineBlocks().then(function(){
396 angular.forEach(lines, function (l) {
397 var parts = l.split(' ');
398 egLovefield.addOfflineBlock(parts[0], parts[1]);
402 ngToast.create(egCore.strings.OFFLINE_BLOCKLIST_SUCCESS);
406 ngToast.warning(egCore.strings.OFFLINE_BLOCKLIST_FAIL);
407 egCore.audio.play('warning.offline.blocklist_fail');
412 $scope.createOfflineXactBlob = function () {
413 return egLovefield.retrievePendingOfflineXacts().then(function(list) {
415 angular.forEach(list, function (i) {
416 flat_list.push(JSON.stringify(i) + '\n');
419 var blob = new Blob(flat_list, {type: 'text/plain'});
425 $scope.pending_xacts = [];
426 $scope.retrieve_pending = function () {
427 return egLovefield.retrievePendingOfflineXacts().then(function(list) {
428 $scope.pending_xacts = list;
429 return $q.when(list);
433 $scope.save = function () {
434 var promises = [$q.when()];
435 angular.forEach($scope.all_xact, function (x) {
436 promises.push(egLovefield.addOfflineXact(x));
439 var prints = [$q.when()];
440 if ($scope.do_print) {
441 angular.forEach(['checkin','checkout','renew','in_house_use'], function(xtype) {
442 if ($scope.xact_page[xtype].length > 0) {
443 prints.push(egCore.print.print({
445 template : 'offline_'+xtype,
447 transactions : $scope.xact_page[xtype]
454 return $q.all(promises.concat(prints)).finally(function() {
455 egUnloadPrompt.clear();
456 if (prints.length > 1) $scope.printed = true;
457 $scope.all_xact = [];
458 $scope.xact_page = { checkin:[], checkout:[], renew:[], in_house_use:[] };
459 angular.forEach(['checkout','renew'], function (xtype) {
460 $scope[xtype].patron_barcode = '';
462 $scope.retrieve_pending();
466 $rootScope.save_offline_xacts = function () { return $scope.save() };
467 //$rootScope.active_tab = function (t) { $scope.active_tab = t };
469 $scope.logout = function () {
470 egCore.auth.logout();
471 $window.location.href = location.href;
474 $scope.clear_pending = function (skip_confirm) {
476 return egLovefield.destroyPendingOfflineXacts().then(function () {
477 return $scope.retrieve_pending();
480 return egConfirmDialog.open(
481 egCore.strings.CONFIRM_CLEAR_PENDING,
482 egCore.strings.CONFIRM_CLEAR_PENDING_BODY,
484 ).result.then(function() {
485 return egLovefield.destroyPendingOfflineXacts().then(function () {
486 return $scope.retrieve_pending();
492 $scope.retrieve_pending();
493 $scope.$watch('active_tab', function (n,o) {
494 console.log('watch caught change to active_tab: ' + o + ' -> ' + n);
495 if (n != o && !$scope.do_check_changed && n != 'checkout') $scope.strict_barcode = false;
496 if (n != o && !$scope.do_check_changed && n == 'checkout') $scope.strict_barcode = true;
497 if (n != o && !$scope.do_print_changed && n != 'checkout') $scope.do_print = false;
498 if (n != o && !$scope.do_print_changed && n == 'checkout') $scope.do_print = true;
499 if (n != o && n == 'session') $scope.retrieve_pending();
502 $scope.$watch('imported_pending_xacts.data', function (n, o) {
504 var lines = n.split('\n');
507 angular.forEach(lines, function (l) {
512 egLovefield.addOfflineXact(JSON.parse(l))
515 ngToast.warning(err);
519 $q.all(promises).then(function () { $scope.retrieve_pending() });
523 $scope.resetDueDate = function (xtype) {
524 $scope.shared.due_date = new Date();
525 $scope.shared.due_date.setDate($scope.shared.due_date.getDate() + parseInt($scope.shared.due_date_offset));
528 $scope.notEnough = function (xtype) {
530 if (xtype == 'checkout') {
531 if ($scope.shared.outOfRange) return true;
533 $scope.checkout.patron_barcode &&
534 ($scope.shared.due_date || $scope.shared.due_date_offset) &&
535 ($scope.checkout.barcode || ($scope.checkout.noncat_type && $scope.checkout.noncat_count))
540 if (xtype == 'renew') {
541 if ($scope.shared.outOfRange) return true;
543 $scope.renew.barcode &&
544 ($scope.shared.due_date || $scope.shared.due_date_offset)
549 if (xtype == 'in_house_use') {
551 $scope.in_house_use.barcode && $scope.in_house_use.count
556 if (xtype == 'checkin') {
558 $scope.checkin.barcode && $scope.checkin.backdate
564 $scope.clear = function (xtype) {
566 if (xtype=="in_house_use") $scope[xtype].count = 1;
569 $scope.add = function (xtype,next_focus) {
571 var barcode = $scope[xtype].barcode;
573 if ($scope.xact_page[xtype].filter(function(x){ return x.barcode == barcode }).length > 0) {
574 ngToast.warning(egCore.strings.DUPLICATE_BARCODE);
575 egCore.audio.play('warning.offline.duplicate_barcode');
576 $scope[xtype].barcode = '';
577 if (next_focus) $('#'+next_focus).focus();
582 var pbarcode = $scope[xtype].patron_barcode;
584 egLovefield.testOfflineBlock(pbarcode).then(function (blocked) {
586 egCore.audio.play('warning.offline.blocked_patron');
587 egConfirmDialog.open(
588 egCore.strings.PATRON_BLOCKED,
589 egCore.strings.PATRON_BLOCKED_WHY[blocked],
590 {}, egCore.strings.ALLOW, egCore.strings.REJECT
592 function(){ // forced
593 $scope.blocked_patron = null;
594 _add_impl(xtype,true)
595 if (next_focus) $('#'+next_focus).focus();
596 },function(){ // stopped
597 $scope.blocked_patron = xtype;
598 if (next_focus) $('#'+next_focus).focus();
603 $scope.blocked_patron = null;
604 _add_impl(xtype,true)
605 if (next_focus) $('#'+next_focus).focus();
610 if (next_focus) $('#'+next_focus).focus();
614 function _add_impl (xtype,digest) {
615 var pbarcode = $scope[xtype].patron_barcode;
616 var backdate = $scope[xtype].backdate;
618 if ($scope.strict_barcode && pbarcode) {
619 if (!check_barcode(pbarcode)) {
620 $scope.bad_barcode = xtype;
621 egCore.audio.play('warning.offline.bad_barcode');
622 return egConfirmDialog.open(
623 egCore.strings.BAD_PATRON_BARCODE,
624 egCore.strings.BAD_PATRON_BARCODE_CD,
625 {}, egCore.strings.ALLOW, egCore.strings.REJECT
627 function(){ // forced
628 $scope.blocked_patron = null;
629 return _add_impl2(xtype,digest)
630 },function(){ // stopped
631 $scope.blocked_patron = xtype;
637 if ($scope.strict_barcode && $scope[xtype].barcode) {
638 if (!check_barcode($scope[xtype].barcode)) {
639 $scope.bad_barcode = xtype;
640 egCore.audio.play('warning.offline.bad_barcode');
641 return egConfirmDialog.open(
642 egCore.strings.BAD_BARCODE,
643 egCore.strings.BAD_BARCODE_CD,
644 {}, egCore.strings.ALLOW, egCore.strings.REJECT
646 function(){ // forced
647 $scope.blocked_patron = null;
648 return _add_impl2(xtype,digest)
649 },function(){ // stopped
650 $scope.blocked_patron = xtype;
656 return _add_impl2(xtype,digest);
659 function _add_impl2 (xtype,digest) {
660 var pbarcode = $scope[xtype].patron_barcode;
661 var backdate = $scope[xtype].backdate;
663 $scope.bad_barcode = null;
665 var now = new Date().getTime();
668 if ($scope[xtype].noncat_type) $scope[xtype].noncat = 1;
670 if ($scope.shared.due_date && (xtype == 'checkout' || xtype == 'renew')) {
671 $scope[xtype].due_date = $scope.shared.due_date.toISOString();
672 $scope[xtype].checkout_time = new Date().toISOString();
675 var xact = { timestamp : parseInt(now), type : xtype, delta : 0 };
677 $scope.xact_page[xtype].push(
678 angular.extend(xact, $scope[xtype])
681 $scope.all_xact.push(xact)
682 egUnloadPrompt.attach($rootScope);
686 if (pbarcode) $scope[xtype].patron_barcode = pbarcode;
687 if (backdate) $scope[xtype].backdate = backdate;
688 if (xtype=="in_house_use") $scope[xtype].count = 1;
690 if (digest) $timeout(function(){$scope.$apply()});
693 check_barcode = function(bc) {
694 if (bc != Number(bc)) return false;
696 // "16.00" == Number("16.00"), but the . is bad.
697 // Throw out any barcode that isn't just digits
698 if (bc.search(/\D/) != -1) return false;
699 var last_digit = bc.substr(bc.length-1);
700 var stripped_barcode = bc.substr(0,bc.length-1);
701 return barcode_checkdigit(stripped_barcode).toString() == last_digit;
704 barcode_checkdigit = function(bc) {
705 var reverse_barcode = bc.toString().split('').reverse();
706 var check_sum = 0; var multiplier = 2;
707 for (var i = 0; i < reverse_barcode.length; i++) {
708 var digit = reverse_barcode[i];
709 var product = digit * multiplier; product = product.toString();
711 for (var j = 0; j < product.length; j++) {
712 temp_sum += Number( product[j] );
714 check_sum += Number( temp_sum );
715 multiplier = ( multiplier == 2 ? 1 : 2 );
717 check_sum = check_sum.toString();
718 var next_multiple_of_10 = (check_sum.match(/(\d*)\d$/)[1] * 10) + 10;
719 var check_digit = next_multiple_of_10 - Number(check_sum);
720 if (check_digit == 10) check_digit = 0;
727 // dummy service so standalone patron editor can reference it
728 .factory('patronSvc', function() { return { /* dummy */ } })
730 .factory('patronRegSvc', ['$q', 'egCore', 'egLovefield', function($q, egCore, egLovefield) {
732 egLovefield.isOffline = true;
735 org : null, // will come from workstation org
736 field_doc : {}, // config.idl_field_doc
737 profiles : [], // permission groups
738 edit_profiles : [], // perm groups we can modify
740 user_settings : {}, // applied user settings
741 user_setting_types : {}, // config.usr_setting_type
742 opt_in_setting_types : {}, // config.usr_setting_type for event-def opt-in
744 survey_questions : {},
746 survey_responses : {}, // survey.responses for loaded patron in progress
748 stat_cat_entry_maps : {}, // cat.id to selected value
749 virt_id : -1, // virtual ID for new objects
750 init_done : false // have we loaded our initialization data?
753 service.offlineMode = function () {
757 // launch a series of parallel data retrieval calls
758 service.init = function(scope) {
760 // Data loaded here only needs to be retrieved the first time this
761 // tab becomes active within the current instance of the patron app.
762 // In other words, navigating between patron tabs will not cause
763 // all of this data to be reloaded. Navigating to a separate app
764 // and returning will cause the data to be reloaded.
765 if (service.init_done) return $q.when();
766 service.init_done = true;
769 service.get_field_doc(),
770 service.get_perm_groups(),
771 service.get_ident_types(),
772 service.get_user_settings(),
773 service.get_org_settings(),
774 service.get_stat_cats(),
775 service.get_surveys(),
776 service.get_net_access_levels()
780 service.get_linked_addr_users = function(addrs) {
784 service.apply_secondary_groups = function(user_id, group_ids) {
785 return $q.when(true);
788 // See note above about not loading egUser.
790 service.format_name = function(last, first, middle) {
791 return last + ', ' + first + (middle ? ' ' + middle : '');
794 service.check_dupe_username = function(usrname) {
795 return $q.when(false);
798 // determine which user groups our user is not allowed to modify
799 service.set_edit_profiles = function() {
800 service.edit_profiles = egCore.env.pgt.list.filter(
801 function (p) { return p.application_perm() == 'group_application.user.patron' }
806 // resolves to a hash of perm-name => boolean value indicating
807 // wether the user has the permission at org_id.
808 service.has_perms_for_org = function(org_id) {
813 'CREATE_USER_GROUP_LINK',
814 'UPDATE_PATRON_COLLECTIONS_EXEMPT',
815 'UPDATE_PATRON_CLAIM_RETURN_COUNT',
816 'UPDATE_PATRON_CLAIM_NEVER_CHECKED_OUT_COUNT',
817 'UPDATE_PATRON_ACTIVE_CARD',
818 'UPDATE_PATRON_PRIMARY_CARD'
822 angular.forEach(perms_needed, function (p) {
826 return $q.when(hash);
829 service.get_surveys = function() {
830 return egLovefield.reconstituteList('asv').then(function(offline) {
831 return egLovefield.reconstituteList('asvq')
833 return egLovefield.reconstituteList('asva');
835 angular.forEach(egCore.env.asv.list, function (s) {
836 s.questions( egCore.env.asva.list.filter( function (a) {
837 return q.survey().id == s.id();
841 angular.forEach(egCore.env.asvq.list, function (q) {
842 q.survey( egCore.env.asv.map[ q.survey().id ] );
843 q.answers( egCore.env.asva.list.filter( function (a) {
844 return q.id() == a.question();
848 angular.forEach(egCore.env.asva.list, function (a) {
849 a.question( egCore.env.asvq.map[ a.question().id ] );
852 service.surveys = egCore.env.asv.list;
853 service.survey_questions = egCore.env.asvq.list;
854 service.survey_answers = egCore.env.asva.list;
861 service.get_stat_cats = function() {
862 return egLovefield.getStatCatsCache().then(
864 service.stat_cats = cats;
870 service.get_org_settings = function() {
871 return egLovefield.getSettingsCache().then(
874 angular.forEach(list, function (s) {
875 hash[s.name] = s.value;
877 service.org_settings = hash;
878 if (egCore && egCore.env && !egCore.env.aous) {
879 egCore.env.aous = hash;
880 console.log('setting egCore.env.aous');
887 service.get_ident_types = function() {
888 return egLovefield.reconstituteList('cit').then(function() {
889 service.ident_types = egCore.env.cit.list;
894 service.get_net_access_levels = function() {
895 return egLovefield.reconstituteList('cnal').then(function() {
896 service.net_access_levels = egCore.env.cnal.list;
901 service.get_perm_groups = function() {
902 if (egCore.env.pgt) {
903 service.profiles = egCore.env.pgt.list;
904 return service.set_edit_profiles();
906 return egLovefield.reconstituteTree('pgt').then(function(offline) {
907 service.profiles = egCore.env.pgt.list;
908 return service.set_edit_profiles();
913 service.get_field_doc = function() {
914 return egLovefield.getListFromOfflineCache('fdoc').then(function (list) {
915 angular.forEach(list, function(doc) {
916 if (!service.field_doc[doc.fm_class()])
917 service.field_doc[doc.fm_class()] = {};
918 service.field_doc[doc.fm_class()][doc.field()] = doc;
924 service.get_user_settings = function() {
926 'circ.holds_behind_desk',
927 'circ.collections.exempt',
929 'opac.default_phone',
930 'opac.default_pickup_location',
931 'opac.default_sms_carrier',
932 'opac.default_sms_notify'];
934 angular.forEach(static_types, function (t) {
935 service.user_settings[t] = null;
938 return egLovefield.getListFromOfflineCache('cust').then(function (list) {
939 angular.forEach(list, function(stype) {
940 service.user_setting_types[stype.name()] = stype;
941 if (static_types.indexOf(stype.name()) == -1) {
942 service.opt_in_setting_types[stype.name()] = stype;
944 if (stype.reg_default() != undefined) {
945 service.user_settings[setting.name()] =
946 setting.reg_default();
953 service.invalidate_field = function(patron, field) {
957 service.dupe_patron_search = function(patron, type, value) {
958 return $q.when({ search : search, count : 0 });
961 service.init_patron = function(current) {
964 return service.init_new_patron();
966 service.patron = current;
967 return service.init_existing_patron(current)
970 service.ingest_address = function(patron, addr) {
971 addr.valid = addr.valid == 't';
972 addr.within_city_limits = addr.within_city_limits == 't';
973 addr._is_mailing = (patron.mailing_address &&
974 addr.id == patron.mailing_address.id);
975 addr._is_billing = (patron.billing_address &&
976 addr.id == patron.billing_address.id);
980 * Existing patron objects reqire some data munging before insertion
983 * 1. Turn everything into a hash
984 * 2. ... Except certain fields (selectors) whose widgets require objects
985 * 3. Bools must be Boolean, not t/f.
987 service.init_existing_patron = function(current) {
989 service.existing_patron = current;
991 var patron = egCore.idl.toHash(current);
993 patron.home_ou = egCore.org.get(patron.home_ou.id);
994 patron.expire_date = new Date(Date.parse(patron.expire_date));
995 patron.dob = service.parse_dob(patron.dob);
996 patron.profile = current.profile(); // pre-hash version
997 patron.net_access_level = current.net_access_level();
998 patron.ident_type = current.ident_type();
999 patron.groups = current.groups(); // pre-hash
1002 ['juvenile', 'barred', 'active', 'master_account'],
1003 function(field) { patron[field] = patron[field] == 't'; }
1006 angular.forEach(patron.cards, function(card) {
1007 card.active = card.active == 't';
1008 if (card.id == patron.card.id) {
1010 card._primary = 'on';
1014 angular.forEach(patron.addresses,
1015 function(addr) { service.ingest_address(patron, addr) });
1017 service.get_linked_addr_users(patron.addresses);
1019 // Remove stat cat entries that link to out-of-scope stat
1020 // cats. With this, we avoid unnecessarily updating (or worse,
1021 // modifying) stat cat values that are not ours to modify.
1022 patron.stat_cat_entries = patron.stat_cat_entries.filter(
1025 // service.stat_cats only contains in-scope stat cats.
1026 service.stat_cats.filter(function(cat) {
1027 return (cat.id() == map.stat_cat.id) })[0]
1032 // toss entries for existing stat cat maps into our living
1033 // stat cat entry map, which is modified within the template.
1034 angular.forEach(patron.stat_cat_entries, function(map) {
1035 service.stat_cat_entry_maps[map.stat_cat.id] = map.stat_cat_entry;
1041 service.init_new_patron = function() {
1043 id : service.virt_id--,
1046 address_type : egCore.strings.REG_ADDR_TYPE,
1049 within_city_limits : false,
1050 country : service.org_settings['ui.patron.default_country'],
1054 id : service.virt_id--,
1060 var home_ou = egCore.org.get(service.org);
1068 stat_cat_entries : [],
1073 if (service.clone_user)
1074 service.copy_clone_data(user);
1076 if (service.stage_user)
1077 service.copy_stage_data(user);
1082 // dob is always YYYY-MM-DD
1083 // Dates of birth do not contain timezone info, which can lead to
1084 // inconcistent timezone handling, potentially representing
1085 // different points in time, depending on the implementation.
1086 // https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/parse
1087 // See "Differences in assumed time zone"
1088 // TODO: move this into egDate ?
1089 service.parse_dob = function(dob) {
1090 if (!dob) return null;
1091 var parts = dob.split('-');
1092 var d = new Date(); // always local time zone, yay.
1093 d.setFullYear(parts[0]);
1094 d.setMonth(parts[1] - 1);
1095 d.setDate(parts[2]);
1099 service.copy_stage_data = function(user) {
1100 var cuser = service.stage_user;
1102 // copy the data into our new user object
1104 for (var key in egCore.idl.classes.stgu.field_map) {
1105 if (egCore.idl.classes.au.field_map[key] &&
1106 !egCore.idl.classes.stgu.field_map[key].virtual) {
1107 if (cuser.user[key]() !== null)
1108 user[key] = cuser.user[key]();
1112 if (user.home_ou) user.home_ou = egCore.org.get(user.home_ou);
1113 if (user.profile) user.profile = egCore.env.pgt.map[user.profile];
1114 if (user.ident_type)
1115 user.ident_type = egCore.env.cit.map[user.ident_type];
1116 user.dob = service.parse_dob(user.dob);
1118 // Clear the usrname if it looks like a UUID
1119 if (user.usrname.replace(/-/g,'').match(/[0-9a-f]{32}/))
1122 // Don't use stub address if we have one from the staged user.
1123 if (cuser.mailing_addresses.length || cuser.billing_addresses.length)
1124 user.addresses = [];
1126 // is_mailing=false implies is_billing
1127 function addr_from_stage(stage_addr) {
1128 if (!stage_addr) return;
1129 var cls = stage_addr.classname;
1132 id : service.virt_id--,
1136 _is_mailing : cls == 'stgma',
1137 _is_billing : cls == 'stgba'
1140 user.mailing_address = addr;
1141 user.addresses.push(addr);
1143 for (var key in egCore.idl.classes[cls].field_map) {
1144 if (egCore.idl.classes.aua.field_map[key] &&
1145 !egCore.idl.classes[cls].field_map[key].virtual) {
1146 if (stage_addr[key]() !== null)
1147 addr[key] = stage_addr[key]();
1152 addr_from_stage(cuser.mailing_addresses[0]);
1153 addr_from_stage(cuser.billing_addresses[0]);
1155 if (user.addresses.length == 1) {
1156 // If there is only one address,
1157 // use it as both mailing and billing.
1158 var addr = user.addresses[0];
1159 addr._is_mailing = addr._is_billing = true;
1160 user.mailing_address = user.billing_address = addr;
1163 if (cuser.cards.length) {
1165 id : service.virt_id--,
1166 barcode : cuser.cards[0].barcode(),
1172 user.cards.push(user.card);
1173 if (user.usrname == '')
1174 user.usrname = card.barcode;
1177 angular.forEach(cuser.settings, function(setting) {
1178 service.user_settings[setting.setting()] = Boolean(setting.value());
1182 // copy select values from the cloned user to the new user.
1184 service.copy_clone_data = function(user) {
1185 var clone_user = service.clone_user;
1187 // flesh the home org locally
1188 user.home_ou = egCore.org.get(clone_user.home_ou());
1189 if (user.profile) user.profile = egCore.env.pgt.map[user.profile];
1191 if (!clone_user.billing_address() &&
1192 !clone_user.mailing_address())
1193 return; // no addresses to copy or link
1195 // if the cloned user has any addresses, we don't need
1196 // the stub address created in init_new_patron.
1197 user.addresses = [];
1199 var copy_addresses =
1200 service.org_settings['circ.patron_edit.clone.copy_address'];
1202 var clone_fields = [
1209 angular.forEach(clone_fields, function(field) {
1210 user[field] = clone_user[field]();
1213 if (copy_addresses) {
1214 var bill_addr, mail_addr;
1216 // copy the billing and mailing addresses into new addresses
1217 function clone_addr(addr) {
1218 var new_addr = egCore.idl.toHash(addr);
1219 new_addr.id = service.virt_id--;
1220 new_addr.usr = user.id;
1221 new_addr.isnew = true;
1222 new_addr.valid = true;
1223 user.addresses.push(new_addr);
1227 if (bill_addr = clone_user.billing_address()) {
1228 var addr = clone_addr(bill_addr);
1229 addr._is_billing = true;
1230 user.billing_address = addr;
1233 if (mail_addr = clone_user.mailing_address()) {
1235 if (bill_addr && bill_addr.id() == mail_addr.id()) {
1236 user.mailing_address = user.billing_address;
1237 user.mailing_address._is_mailing = true;
1239 var addr = clone_addr(mail_addr);
1240 addr._is_mailing = true;
1241 user.mailing_address = addr;
1245 // if there is no billing addr, use the mailing addr
1246 user.billing_address = user.mailing_address;
1247 user.billing_address._is_billing = true;
1254 // link the billing and mailing addresses
1256 if (addr = clone_user.billing_address()) {
1257 user.billing_address = egCore.idl.toHash(addr);
1258 user.billing_address._is_billing = true;
1259 user.addresses.push(user.billing_address);
1260 user.billing_address._linked_owner_id = clone_user.id();
1261 user.billing_address._linked_owner = service.format_name(
1262 clone_user.family_name(),
1263 clone_user.first_given_name(),
1264 clone_user.second_given_name()
1268 if (addr = clone_user.mailing_address()) {
1269 if (user.billing_address &&
1270 addr.id() == user.billing_address.id) {
1271 // mailing matches billing
1272 user.mailing_address = user.billing_address;
1273 user.mailing_address._is_mailing = true;
1275 user.mailing_address = egCore.idl.toHash(addr);
1276 user.mailing_address._is_mailing = true;
1277 user.addresses.push(user.mailing_address);
1278 user.mailing_address._linked_owner_id = clone_user.id();
1279 user.mailing_address._linked_owner = service.format_name(
1280 clone_user.family_name(),
1281 clone_user.first_given_name(),
1282 clone_user.second_given_name()
1289 // translate the patron back into IDL form
1290 service.save_user = function(phash) {
1292 var patron = egCore.idl.fromHash('au', phash);
1294 patron.home_ou(patron.home_ou().id());
1295 patron.expire_date(patron.expire_date().toISOString());
1296 patron.profile(patron.profile().id());
1298 patron.dob(patron.dob().toISOString().replace(/T.*/,''));
1299 if (patron.ident_type())
1300 patron.ident_type(patron.ident_type().id());
1301 if (patron.net_access_level())
1302 patron.net_access_level(patron.net_access_level().id());
1305 ['juvenile', 'barred', 'active', 'master_account'],
1306 function(field) { patron[field](phash[field] ? 't' : 'f'); }
1309 var card_hashes = patron.cards();
1311 angular.forEach(card_hashes, function(chash) {
1312 var card = egCore.idl.fromHash('ac', chash)
1313 card.usr(patron.id());
1314 card.active(chash.active ? 't' : 'f');
1315 patron.cards().push(card);
1316 if (chash._primary) {
1321 var addr_hashes = patron.addresses();
1322 patron.addresses([]);
1323 angular.forEach(addr_hashes, function(addr_hash) {
1324 if (!addr_hash.isnew && !addr_hash.isdeleted)
1325 addr_hash.ischanged = true;
1326 var addr = egCore.idl.fromHash('aua', addr_hash);
1327 patron.addresses().push(addr);
1328 addr.valid(addr.valid() ? 't' : 'f');
1329 addr.within_city_limits(addr.within_city_limits() ? 't' : 'f');
1330 if (addr_hash._is_mailing) patron.mailing_address(addr);
1331 if (addr_hash._is_billing) patron.billing_address(addr);
1334 patron.survey_responses([]);
1335 angular.forEach(service.survey_responses, function(answer) {
1336 var question = service.survey_questions[answer.question()];
1337 var resp = new egCore.idl.asvr();
1339 resp.survey(question.survey());
1340 resp.question(question.id());
1341 resp.answer(answer.id());
1342 resp.usr(patron.id());
1343 resp.answer_date('now');
1344 patron.survey_responses().push(resp);
1347 // re-object-ify the patron stat cat entry maps
1349 angular.forEach(patron.stat_cat_entries(), function(entry) {
1350 var e = egCore.idl.fromHash('actscecm', entry);
1351 e.stat_cat(e.stat_cat().id);
1354 patron.stat_cat_entries(maps);
1356 // service.stat_cat_entry_maps maps stats to values
1357 // patron.stat_cat_entries is an array of stat_cat_entry_usr_map's
1359 service.stat_cat_entry_maps, function(value, cat_id) {
1361 // see if we already have a mapping for this entry
1362 var existing = patron.stat_cat_entries().filter(
1363 function(e) { return e.stat_cat() == cat_id })[0];
1365 if (existing) { // we have a mapping
1366 // if the existing mapping matches the new one,
1367 // there' nothing left to do
1368 if (existing.stat_cat_entry() == value) return;
1370 // mappings differ. delete the old one and create
1372 existing.isdeleted(true);
1375 var newmap = new egCore.idl.actscecm();
1376 newmap.target_usr(patron.id());
1378 newmap.stat_cat(cat_id);
1379 newmap.stat_cat_entry(value);
1380 patron.stat_cat_entries().push(newmap);
1383 if (!patron.isnew()) patron.ischanged(true);
1385 return egLovefield.addOfflineXact({
1386 user : egCore.idl.toHash(patron),
1387 timestamp : parseInt(new Date().getTime() / 1000),
1390 }).then(function (success) {
1391 if (success) return patron;
1395 service.remove_staged_user = function() {
1396 if (!service.stage_user) return $q.when();
1397 return egCore.net.request(
1399 'open-ils.actor.user.stage.delete',
1400 egCore.auth.token(),
1401 service.stage_user.user.row_id()
1405 service.save_user_settings = function(new_user, user_settings) {
1409 // Applies field-specific validation regex's from org settings
1410 // to form fields. Be careful not remove any pattern data we
1411 // are not explicitly over-writing in the provided patterns obj.
1412 service.set_field_patterns = function(patterns) {
1413 if (service.org_settings['opac.username_regex']) {
1414 patterns.au.usrname =
1415 new RegExp(service.org_settings['opac.username_regex']);
1418 if (service.org_settings['opac.barcode_regex']) {
1419 patterns.ac.barcode =
1420 new RegExp(service.org_settings['opac.barcode_regex']);
1423 if (service.org_settings['global.password_regex']) {
1424 patterns.au.passwd =
1425 new RegExp(service.org_settings['global.password_regex']);
1428 var phone_reg = service.org_settings['ui.patron.edit.phone.regex'];
1430 // apply generic phone regex first, replace below as needed.
1431 patterns.au.day_phone = new RegExp(phone_reg);
1432 patterns.au.evening_phone = new RegExp(phone_reg);
1433 patterns.au.other_phone = new RegExp(phone_reg);
1436 // the remaining patterns fit a well-known key name pattern
1438 angular.forEach(service.org_settings, function(val, key) {
1440 var parts = key.match(/ui.patron.edit\.(\w+)\.(\w+)\.regex/);
1443 var name = parts[2];
1444 patterns[cls][name] = new RegExp(val);
1451 .controller('PatronRegCtrl',
1452 ['$scope','$routeParams','$q','$uibModal','$window','egCore',
1453 'patronSvc','patronRegSvc','egUnloadPrompt','egAlertDialog',
1454 'egWorkLog','$timeout','egLovefield','$rootScope',
1455 function($scope , $routeParams , $q , $uibModal , $window , egCore ,
1456 patronSvc , patronRegSvc , egUnloadPrompt, egAlertDialog ,
1457 egWorkLog , $timeout , egLovefield , $rootScope) {
1459 $scope.rs = $rootScope;
1460 if ($scope.workstation_obj) patronRegSvc.org = $scope.workstation_obj.owning_lib;
1461 $scope.offline = true;
1463 $scope.page_data_loaded = false;
1464 $scope.clone_id = patronRegSvc.clone_id = $routeParams.clone_id;
1465 $scope.stage_username =
1466 patronRegSvc.stage_username = $routeParams.stage_username;
1468 patronRegSvc.patron_id = $routeParams.edit_id || $routeParams.id;
1470 // for existing patrons, disable barcode input by default
1471 $scope.disable_bc = $scope.focus_usrname = Boolean($scope.patron_id);
1472 $scope.focus_bc = !Boolean($scope.patron_id);
1473 $scope.address_alerts = [];
1474 $scope.dupe_counts = {};
1476 // map of perm name to true/false for perms the logged in user
1477 // has at the currently selected patron home org unit.
1480 $scope.edit_passthru = {};
1482 // 0=all, 1=suggested, 2=all
1483 $scope.edit_passthru.vis_level = 2;
1485 // Apply default values for new patrons during initial registration
1486 // prs is shorthand for patronSvc
1487 function set_new_patron_defaults(prs) {
1488 if (!$scope.patron.passwd) {
1489 // passsword may originate from staged user.
1490 $scope.generate_password();
1492 $scope.hold_notify_phone = true;
1493 $scope.hold_notify_email = true;
1495 // staged users may be loaded w/ a profile.
1496 $scope.set_expire_date();
1498 if (prs.org_settings['ui.patron.default_ident_type']) {
1499 // $scope.patron needs this field to be an object
1500 var id = prs.org_settings['ui.patron.default_ident_type'];
1501 var ident_type = $scope.ident_types.filter(
1502 function(type) { return type.id() == id })[0];
1503 $scope.patron.ident_type = ident_type;
1505 if (prs.org_settings['ui.patron.default_inet_access_level']) {
1506 // $scope.patron needs this field to be an object
1507 var id = prs.org_settings['ui.patron.default_inet_access_level'];
1508 var level = $scope.net_access_levels.filter(
1509 function(lvl) { return lvl.id() == id })[0];
1510 $scope.patron.net_access_level = level;
1512 if (prs.org_settings['ui.patron.default_country']) {
1513 $scope.patron.addresses[0].country =
1514 prs.org_settings['ui.patron.default_country'];
1518 // A null or undefined pattern leads to exceptions. Before the
1519 // patterns are loaded from the server, default all patterns
1520 // to an innocuous regex. To avoid re-creating numerous
1521 // RegExp objects, cache the stub RegExp after initial creation.
1522 // note: angular docs say ng-pattern accepts a regexp or string,
1523 // but as of writing, it only works with a regexp object.
1524 // (Likely an angular 1.2 vs. 1.4 issue).
1525 var field_patterns = {au : {}, ac : {}, aua : {}};
1526 $scope.field_pattern = function(cls, field) {
1527 if (!field_patterns[cls][field])
1528 field_patterns[cls][field] = new RegExp('.*');
1529 return field_patterns[cls][field];
1532 patronRegSvc.offlineMode($scope.offline); // force offline if ng-init'd to do so
1533 patronRegSvc.init().then(function() {
1534 // called after initTab and patronRegSvc.init have completed
1536 var prs = patronRegSvc; // brevity
1537 // in standalone mode, we have no patronSvc
1538 $scope.patron = prs.init_patron(patronSvc ? patronSvc.current : null);
1539 $scope.field_doc = prs.field_doc;
1540 $scope.edit_profiles = prs.edit_profiles;
1541 $scope.ident_types = prs.ident_types;
1542 $scope.net_access_levels = prs.net_access_levels;
1543 $scope.user_setting_types = prs.user_setting_types;
1544 $scope.opt_in_setting_types = prs.opt_in_setting_types;
1545 $scope.org_settings = prs.org_settings;
1546 $scope.sms_carriers = prs.sms_carriers;
1547 $scope.stat_cats = prs.stat_cats;
1548 $scope.surveys = prs.surveys;
1549 $scope.survey_responses = prs.survey_responses;
1550 $scope.stat_cat_entry_maps = prs.stat_cat_entry_maps;
1551 $scope.stage_user = prs.stage_user;
1552 $scope.stage_user_requestor = prs.stage_user_requestor;
1554 $scope.user_settings = prs.user_settings;
1555 // clone the user settings back into the patronRegSvc so
1556 // we have a copy of the original state of the settings.
1557 prs.user_settings = {};
1558 angular.forEach($scope.user_settings, function(val, key) {
1559 prs.user_settings[key] = val;
1562 extract_hold_notify();
1563 $scope.handle_home_org_changed();
1565 if ($scope.org_settings['ui.patron.edit.default_suggested'])
1566 $scope.edit_passthru.vis_level = 1;
1568 if ($scope.patron.isnew)
1569 set_new_patron_defaults(prs);
1571 $scope.page_data_loaded = true;
1573 prs.set_field_patterns(field_patterns);
1574 apply_username_regex();
1577 // update the currently displayed field documentation
1578 $scope.set_selected_field_doc = function(cls, field) {
1579 $scope.selected_field_doc = $scope.field_doc[cls][field];
1582 // returns the tree depth of the selected profile group tree node.
1583 $scope.pgt_depth = function(grp) {
1585 while (grp = egCore.env.pgt.map[grp.parent()]) d++;
1589 // IDL fields used for labels in the UI.
1590 $scope.idl_fields = {
1591 au : egCore.idl.classes.au.field_map,
1592 ac : egCore.idl.classes.ac.field_map,
1593 aua : egCore.idl.classes.aua.field_map
1596 // field visibility cache. Some fields are universally required.
1597 // 3 == value universally required
1598 // 2 == field is visible by default
1599 // 1 == field is suggested by default
1600 var field_visibility = {};
1601 var default_field_visibility = {
1605 'au.first_given_name' : 3,
1606 'au.family_name' : 3,
1607 'au.ident_type' : 3,
1610 'au.expire_date' : 3,
1611 'au.net_access_level' : 3,
1612 'aua.address_type' : 3,
1613 'aua.post_code' : 3,
1621 'aua.within_city_limits' : 2,
1626 // Returns true if the selected field should be visible
1627 // given the current required/suggested/all setting.
1628 // The visibility flag applied to each field as a result of calling
1629 // this function also sets (via the same flag) the requiredness state.
1630 $scope.show_field = function(field_key) {
1631 // org settings have not been received yet.
1632 if (!$scope.org_settings) return false;
1634 if (field_visibility[field_key] == undefined) {
1635 // compile and cache the visibility for the selected field
1637 var req_set = 'ui.patron.edit.' + field_key + '.require';
1638 var sho_set = 'ui.patron.edit.' + field_key + '.show';
1639 var sug_set = 'ui.patron.edit.' + field_key + '.suggest';
1641 if ($scope.org_settings[req_set]) {
1642 field_visibility[field_key] = 3;
1644 } else if ($scope.org_settings[sho_set]) {
1645 field_visibility[field_key] = 2;
1647 } else if ($scope.org_settings[sug_set]) {
1648 field_visibility[field_key] = 1;
1652 if (field_visibility[field_key] == undefined) {
1653 // No org settings were applied above. Use the default
1654 // settings if present or assume the field has no
1655 // visibility flags applied.
1656 field_visibility[field_key] =
1657 default_field_visibility[field_key] || 0;
1660 return field_visibility[field_key] >= $scope.edit_passthru.vis_level;
1663 // See $scope.show_field().
1664 // A field with visbility level 3 means it's required.
1665 $scope.field_required = function(cls, field) {
1667 // Value in the password field is not required
1668 // for existing patrons.
1669 if (field == 'passwd' && $scope.patron && !$scope.patron.isnew)
1672 return (field_visibility[cls + '.' + field] == 3 || default_field_visibility[cls + '.' + field] == 3);
1675 // generates a random 4-digit password
1676 $scope.generate_password = function() {
1677 $scope.patron.passwd = Math.floor(Math.random()*9000) + 1000;
1680 $scope.set_expire_date = function() {
1681 if (!$scope.patron.profile) return;
1682 var seconds = egCore.date.intervalToSeconds(
1683 $scope.patron.profile.perm_interval());
1684 var now_epoch = new Date().getTime();
1685 $scope.patron.expire_date = new Date(
1686 now_epoch + (seconds * 1000 /* milliseconds */))
1689 // grp is the pgt object
1690 $scope.set_profile = function(grp) {
1691 $scope.patron.profile = grp;
1692 $scope.set_expire_date();
1693 $scope.field_modified();
1696 $scope.invalid_profile = function() {
1699 $scope.patron.profile &&
1700 $scope.patron.profile.usergroup() == 't'
1704 $scope.new_address = function() {
1705 var addr = egCore.idl.toHash(new egCore.idl.aua());
1706 patronRegSvc.ingest_address($scope.patron, addr);
1707 addr.id = patronRegSvc.virt_id--;
1710 addr.within_city_limits = true;
1711 addr.country = $scope.org_settings['ui.patron.default_country'];
1712 $scope.patron.addresses.push(addr);
1715 // keep deleted addresses out of the patron object so
1716 // they won't appear in the UI. They'll be re-inserted
1717 // when the patron is updated.
1718 deleted_addresses = [];
1719 $scope.delete_address = function(id) {
1721 if ($scope.patron.isnew &&
1722 $scope.patron.addresses.length == 1 &&
1723 $scope.org_settings['ui.patron.registration.require_address']) {
1724 egAlertDialog.open(egCore.strings.REG_ADDR_REQUIRED);
1729 angular.forEach($scope.patron.addresses, function(addr) {
1730 if (addr.id == id) {
1732 addr.isdeleted = true;
1733 deleted_addresses.push(addr);
1736 addresses.push(addr);
1739 $scope.patron.addresses = addresses;
1742 $scope.post_code_changed = function(addr) {
1743 if ($scope.offline) return;
1745 'open-ils.search', 'open-ils.search.zip', addr.post_code)
1746 .then(function(resp) {
1748 if (resp.city) addr.city = resp.city;
1749 if (resp.state) addr.state = resp.state;
1750 if (resp.county) addr.county = resp.county;
1751 if (resp.alert) alert(resp.alert);
1755 $scope.replace_card = function() {
1756 $scope.patron.card.active = false;
1757 $scope.patron.card.ischanged = true;
1758 $scope.disable_bc = false;
1760 var new_card = egCore.idl.toHash(new egCore.idl.ac());
1761 new_card.id = patronRegSvc.virt_id--;
1762 new_card.isnew = true;
1763 new_card.active = true;
1764 new_card._primary = 'on';
1765 $scope.patron.card = new_card;
1766 $scope.patron.cards.push(new_card);
1769 $scope.day_phone_changed = function(phone) {
1770 if (phone && $scope.patron.isnew &&
1771 $scope.org_settings['patron.password.use_phone']) {
1772 $scope.patron.passwd = phone.substr(-4);
1776 $scope.barcode_changed = function(bc) {
1778 if (!$scope.patron.usrname)
1779 $scope.patron.usrname = bc;
1782 $scope.cards_dialog = function() {
1784 templateUrl: './circ/patron/t_patron_cards_dialog',
1786 ['$scope','$uibModalInstance','cards','perms',
1787 function($scope , $uibModalInstance , cards , perms) {
1788 // scope here is the modal-level scope
1789 $scope.args = {cards : cards};
1790 $scope.perms = perms;
1791 $scope.ok = function() { $uibModalInstance.close($scope.args) }
1792 $scope.cancel = function () { $uibModalInstance.dismiss() }
1795 cards : function() {
1796 // scope here is the controller-level scope
1797 return $scope.patron.cards;
1799 perms : function() {
1800 return $scope.perms;
1805 angular.forEach(args.cards, function(card) {
1806 card.ischanged = true; // assume cards need updating, OK?
1807 if (card._primary == 'on' &&
1808 card.id != $scope.patron.card.id) {
1809 $scope.patron.card = card;
1816 $scope.set_addr_type = function(addr, type) {
1817 var addrs = $scope.patron.addresses;
1818 if (addr['_is_'+type]) {
1819 angular.forEach(addrs, function(a) {
1820 if (a.id != addr.id) a['_is_'+type] = false;
1823 // unchecking mailing/billing means we have to randomly
1824 // select another address to fill that role. Select the
1825 // first address in the list (that does not match the
1827 for (var i = 0; i < addrs.length; i++) {
1828 if (addrs[i].id != addr.id) {
1829 addrs[i]['_is_' + type] = true;
1837 // Translate hold notify preferences from the form/scope back into a
1838 // single user setting value for opac.hold_notify.
1839 function compress_hold_notify() {
1840 var hold_notify = '';
1842 if ($scope.hold_notify_phone) {
1843 hold_notify = 'phone';
1846 if ($scope.hold_notify_email) {
1847 hold_notify = splitter + 'email';
1850 if ($scope.hold_notify_sms) {
1851 hold_notify = splitter + 'sms';
1854 $scope.user_settings['opac.hold_notify'] = hold_notify;
1857 // dialog for selecting additional permission groups
1858 $scope.secondary_groups_dialog = function() {
1860 templateUrl: './circ/patron/t_patron_groups_dialog',
1862 ['$scope','$uibModalInstance','linked_groups','pgt_depth',
1863 function($scope , $uibModalInstance , linked_groups , pgt_depth) {
1865 $scope.pgt_depth = pgt_depth;
1867 linked_groups : linked_groups,
1868 edit_profiles : patronRegSvc.edit_profiles,
1869 new_profile : patronRegSvc.edit_profiles[0]
1872 // add a new group to the linked groups list
1873 $scope.link_group = function($event, grp) {
1874 var found = false; // avoid duplicates
1875 angular.forEach($scope.args.linked_groups,
1876 function(g) {if (g.id() == grp.id()) found = true});
1877 if (!found) $scope.args.linked_groups.push(grp);
1878 $event.preventDefault(); // avoid close
1881 // remove a group from the linked groups list
1882 $scope.unlink_group = function($event, grp) {
1883 $scope.args.linked_groups =
1884 $scope.args.linked_groups.filter(function(g) {
1885 return g.id() != grp.id()
1887 $event.preventDefault(); // avoid close
1890 $scope.ok = function() { $uibModalInstance.close($scope.args) }
1891 $scope.cancel = function () { $uibModalInstance.dismiss() }
1894 linked_groups : function() { return $scope.patron.groups },
1895 pgt_depth : function() { return $scope.pgt_depth }
1900 if ($scope.patron.isnew) {
1901 // groups must be linked for new patrons after the
1902 // patron is created.
1903 $scope.patron.groups = args.linked_groups;
1907 // update links groups for existing users in real time.
1908 var ids = args.linked_groups.map(function(g) {return g.id()});
1909 patronRegSvc.apply_secondary_groups($scope.patron.id, ids)
1910 .then(function(success) {
1912 $scope.patron.groups = args.linked_groups;
1918 function extract_hold_notify() {
1919 notify = $scope.user_settings['opac.hold_notify'];
1920 if (!notify) return;
1921 $scope.hold_notify_phone = Boolean(notify.match(/phone/));
1922 $scope.hold_notify_email = Boolean(notify.match(/email/));
1923 $scope.hold_notify_sms = Boolean(notify.match(/sms/));
1926 $scope.invalidate_field = function(field) {
1927 patronRegSvc.invalidate_field($scope.patron, field);
1930 address_alert = function(addr) {
1931 if ($scope.offline) return;
1933 street1: addr.street1,
1934 street2: addr.street2,
1937 county: addr.county,
1938 country: addr.country,
1939 post_code: addr.post_code,
1940 mailing_address: addr._is_mailing,
1941 billing_address: addr._is_billing
1946 'open-ils.actor.address_alert.test',
1947 egCore.auth.token(), egCore.auth.user().ws_ou(), args
1948 ).then(function(res) {
1949 $scope.address_alerts = res;
1953 $scope.dupe_value_changed = function(type, value) {
1954 $scope.dupe_counts[type] = 0;
1955 patronRegSvc.dupe_patron_search($scope.patron, type, value)
1956 .then(function(res) {
1957 $scope.dupe_counts[type] = res.count;
1959 $scope.dupe_search_encoded =
1960 encodeURIComponent(js2JSON(res.search));
1962 $scope.dupe_search_encoded = '';
1967 // Dummy function in offline mode
1968 $scope.handle_home_org_changed = function() {}
1970 // This is called with every character typed in a form field,
1971 // since that's the only way to gaurantee something has changed.
1972 // See handle_field_changed for ng-change vs. ng-blur.
1973 $scope.field_modified = function() {
1974 // Call attach with every field change, regardless of whether
1975 // it's been called before. This will allow for re-attach after
1976 // the user clicks through the unload warning. egUnloadPrompt
1977 // will ensure we only attach once.
1978 egUnloadPrompt.attach($rootScope);
1981 // also monitor when form is changed *by the user*, as using
1982 // an ng-change handler doesn't work with eg-date-input
1983 $scope.$watch('reg_form.$pristine', function(newVal, oldVal) {
1984 if (!newVal) egUnloadPrompt.attach($rootScope);
1987 // username regex (if present) must be removed any time
1988 // the username matches the barcode to avoid firing the
1989 // invalid field handlers.
1990 function apply_username_regex() {
1991 var regex = $scope.org_settings['opac.username_regex'];
1993 if ($scope.patron.card.barcode) {
1994 // username must match the regex or the barcode
1995 field_patterns.au.usrname =
1997 regex + '|^' + $scope.patron.card.barcode + '$');
1999 // username must match the regex
2000 field_patterns.au.usrname = new RegExp(regex);
2003 // username can be any format.
2004 field_patterns.au.usrname = new RegExp('.*');
2008 // obj could be the patron, an address, etc.
2009 // This is called any time a form field achieves then loses focus.
2010 // It does not necessarily mean the field has changed.
2011 // The alternative is ng-change, but it's called with each character
2012 // typed, which would be overkill for many of the actions called here.
2013 $scope.handle_field_changed = function(obj, field_name) {
2016 var cls = obj.classname; // set by egIdl
2017 var value = obj[field_name];
2020 //console.log('changing field ' + field_name + ' to ' + value);
2022 switch (field_name) {
2024 if ($scope.patron.day_phone &&
2025 $scope.patron.isnew &&
2026 $scope.org_settings['patron.password.use_phone']) {
2027 $scope.patron.passwd = phone.substr(-4);
2032 apply_username_regex();
2033 $scope.barcode_changed(value);
2037 maintain_juvenile_flag();
2045 // patron.juvenile is set to true if the user was born after
2046 function maintain_juvenile_flag() {
2047 if ( !($scope.patron && $scope.patron.dob) ) return;
2050 $scope.org_settings['global.juvenile_age_threshold']
2053 var base = new Date();
2055 base.setTime(base.getTime() -
2056 Number(egCore.date.intervalToSeconds(juv_interval) + '000'));
2058 $scope.patron.juvenile = ($scope.patron.dob > base);
2061 // returns true (disable) for orgs that cannot have users.
2062 $scope.disable_home_org = function(org_id) {
2063 if (!org_id) return;
2064 var org = egCore.org.get(org_id);
2068 org.ou_type().can_have_users() == 'f'
2072 // Returns true if the Save and Save & Clone buttons should be disabled.
2073 $scope.edit_passthru.hide_save_actions = function() {
2077 // Returns true if any input elements are tagged as invalid
2078 // via Angular patterns or required attributes.
2079 function form_has_invalid_fields() {
2080 return $('#patron-reg-container .ng-invalid').length > 0;
2083 function form_is_incomplete() {
2085 $scope.dupe_username ||
2086 $scope.dupe_barcode ||
2087 form_has_invalid_fields()
2092 $scope.edit_passthru.save = function(save_args) {
2093 if (!save_args) save_args = {};
2095 if (form_is_incomplete()) {
2096 // User has not provided valid values for all required fields.
2097 return egAlertDialog.open(egCore.strings.REG_INVALID_FIELDS);
2100 // remove page unload warning prompt
2101 egUnloadPrompt.clear();
2103 // toss the deleted addresses back into the patron's list of
2104 // addresses so it's included in the update
2105 $scope.patron.addresses =
2106 $scope.patron.addresses.concat(deleted_addresses);
2108 compress_hold_notify();
2112 patronRegSvc.save_user($scope.patron)
2113 .then($scope.rs.save_offline_xacts)
2114 .then(function(new_user) {
2115 // reload the current page
2116 $window.location.href = location.href;