1 # ---------------------------------------------------------------------
2 # Author: Bill Erickson <erickson@esilibrary.com>
3 # Author: Dan Scott <dscott@laurentian.ca>
5 # Makefile to install prerequisites for OpenSRF
7 # Currently supports Debian (lenny/squeeze), Ubuntu (hardy/lucid)
8 # Working towards support of CentOS 5 / RHEL 5 and Fedora.
9 # Installs Perl prereqs, libjs with Perl wrapper
12 # make -f Makefile.install debian-lenny
14 # make -f Makefile.install debian-squeeze
16 # make -f Makefile.install ubuntu-hardy
18 # make -f Makefile.install ubuntu-lucid
20 # make -f Makefile.install centos
22 # make -f Makefile.install rhel
24 # make -f Makefile.install fedora14
28 # This makefile has been tested much more with Ubuntu and Debian than
29 # CentOS, Fedora, or RHEL.
31 # ---------------------------------------------------------------------
33 # Make any assumptions about the shell being used explicit
37 # Gentoo needs explicit versions on many of these packages
38 # to simulate a "blessed" set of packages
41 LBITS=$(shell getconf LONG_BIT)
43 # ejabberd is not packaged on CentOS/RHEL, so we have to
44 # download the installable package from the source
46 EJABBERD_PKG=ejabberd-2.1.2-linux-x86-installer.bin
47 EJABBERD_PKG_x64=ejabberd-2.1.2-linux-x86_64-installer.bin
48 EJABBERD_HOST=http://www.process-one.net/downloads/ejabberd
50 # Centos and Redhat will require the rpmforge repository mostly for memcache and perl modules
51 RPMFORGE_PKG_x64=rpmforge-release-0.5.1-1.el5.rf.x86_64.rpm
52 RPMFORGE_PKG=rpmforge-release-0.5.1-1.el5.rf.i386.rpm
53 RPMFORGE_HOST=http://packages.sw.be/rpmforge-release
55 # need newer libtool, autoconf, and automake on centos
56 AUTOCONF_HOST=http://ftp.gnu.org/gnu/autoconf
57 AUTOCONF_PKG=autoconf-2.65
58 LIBTOOL_HOST=http://ftp.gnu.org/gnu/libtool
59 LIBTOOL_PKG=libtool-2.2.6b
60 AUTOMAKE_HOST=http://ftp.gnu.org/gnu/automake
61 AUTOMAKE_PKG=automake-1.11
63 # libmemcached is only packaged on newer distros
64 LIBMEMCACHED=libmemcached-0.40
65 LIBMEMCACHED_HOST=http://download.tangent.org
67 # XML::LibXSLT fails due to old libxslt
69 XSLT_HOST=ftp://ftp.gnome.org/pub/GNOME/sources/libxslt/1.1
71 # libxslt depends on a newer version of libxml2:
73 XML2_HOST=ftp://ftp.gnome.org/pub/GNOME/sources/libxml2/2.6
88 libcache-memcached-perl\
89 libclass-dbi-abstractsearch-perl\
90 libclass-dbi-sqlite-perl\
91 libdatetime-format-builder-perl\
92 libdatetime-format-mail-perl\
94 libdatetime-timezone-perl\
97 libfile-find-rule-perl\
100 liblog-log4perl-perl\
101 libmodule-build-perl\
110 libuniversal-require-perl\
145 perl-Cache-Memcached \
146 perl-Class-DBI-AbstractSearch \
147 perl-Class-DBI-SQLite \
149 perl-DateTime-Format-ISO8601 \
150 perl-DateTime-Format-Mail \
152 perl-DateTime-TimeZone \
156 perl-File-Find-Rule \
160 perl-Memcached-libmemcached \
163 perl-Template-Toolkit \
166 perl-UNIVERSAL-require \
203 perl-Cache-Memcached \
205 perl-Class-DBI-AbstractSearch \
206 perl-Class-DBI-SQLite \
207 perl-DateTime-Format-Builder \
208 perl-DateTime-Format-ISO8601 \
209 perl-DateTime-Format-Mail \
213 perl-File-Find-Rule \
221 perl-SQL-Abstract-Limit \
222 perl-Template-Toolkit \
224 perl-Test-Exception \
227 perl-UNIVERSAL-require \
244 libdatetime-format-iso8601-perl \
248 EXTRA_DEBS_SQUEEZE = \
254 EXTRA_DEBS_UBUNTU_LUCID = \
259 # generic CPAN modules:
260 # * DateTime::Format::ISO8601 is packaged by both Debian Lenny and Ubuntu Intrepid
261 # * JSON::XS is packaged by both Debian Lenny and Ubuntu Intrepid
262 # * libnet-server-perl 0.97 is packaged on Debian Lenny and Ubuntu Intrepid
263 # - is there a specific need for 0.90?
265 DateTime::Format::ISO8601 \
266 RHANDOM/Net-Server-0.90.tar.gz \
269 # libxml-libxml-perl on Debian Lenny and Ubuntu Intrepid is 1.66, which
270 # has broken namespace handling. so we still need to install these from
276 # ----------------------------------------------------------------------------
279 @echo "please specify an OS" && exit 0
282 centos: install_rpmforge install_centos_rpms install_ejabberd install_buildutils install_libmemcached install_libxml2 install_libxslt install_centos_perl create_ld_local
284 debian-lenny: generic_debian install_cpan_xml lenny install_libmemcached
285 debian-squeeze: generic_debian squeeze
286 lenny: install_extra_debs
287 squeeze: install_extra_debs_squeeze
288 generic_debian: install_debs debian_sys_config
290 fedora14: install_fedora_rpms
294 ubuntu-hardy: generic_ubuntu install_cpan_xml hardy
295 ubuntu-lucid: generic_ubuntu lucid
296 hardy: install_cpan install_libmemcached
297 lucid: install_extra_debs install_extra_debs_lucid
298 generic_ubuntu: install_debs debian_sys_config
300 # - COMMON TARGETS ---------------------------------------------------------
302 # Install the CPAN modules
304 for m in $(CPAN_MODULES); do perl -MCPAN -e "install \"$$m\";"; done
306 # Install CPAN modules that need to be forced
308 for m in $(CPAN_MODULES_FORCE); do perl -MCPAN -e "CPAN::Shell->force(qw#install $$m#);"; done
310 # Install the CPAN XML modules
312 for m in $(CPAN_MODULES_XML); do perl -MCPAN -e "install \"$$m\";"; done
314 # Install ejabberd from official project installer binary
316 if [ $(LBITS) -eq 64 ]; then \
317 if [ ! -f $(EJABBERD_PKG_x64).gz ]; then \
318 wget $(EJABBERD_HOST)/$(EJABBERD_VER)/$(EJABBERD_PKG_x64).gz; \
320 gunzip $(EJABBERD_PKG_x64).gz; \
321 chmod u+x $(EJABBERD_PKG_x64); \
322 ./$(EJABBERD_PKG_x64) --mode unattended --prefix /opt/ejabberd --adminpw opensrf ; \
324 if [ $(LBITS) -eq 32 ]; then \
325 if [ ! -f $(EJABBERD_PKG).gz ]; then \
326 wget $(EJABBERD_HOST)/$(EJABBERD_VER)/$(EJABBERD_PKG).gz; \
328 gunzip $(EJABBERD_PKG).gz; \
329 chmod u+x $(EJABBERD_PKG); \
330 ./$(EJABBERD_PKG) --mode unattended --prefix /opt/ejabberd --adminpw opensrf ; \
333 # Install rpmforge for redhat and centos
335 if [ $(LBITS) -eq 64 ]; then \
336 if [ ! -f $(RPMFORGE_PKG_x64) ]; then \
337 wget $(RPMFORGE_HOST)/$(RPMFORGE_PKG_x64) ; \
338 yum -y remove subversion*i386 ; \
340 rpm -Uvh --force ./$(RPMFORGE_PKG_x64) ; \
342 if [ $(LBITS) -eq 32 ]; then \
343 if [ ! -f $(RPMFORGE_PKG) ]; then \
344 wget $(RPMFORGE_HOST)/$(RPMFORGE_PKG) ; \
346 rpm -Uvh --force ./$(RPMFORGE_PKG) ; \
350 # Install automake, autoconf, and libtool
352 if [ ! -f $(LIBTOOL_PKG).tar.gz ]; then wget $(LIBTOOL_HOST)/$(LIBTOOL_PKG).tar.gz; fi;
353 tar zxf $(LIBTOOL_PKG).tar.gz
354 cd $(LIBTOOL_PKG) && ./configure --prefix=/usr && make && make install
356 if [ ! -f $(AUTOCONF_PKG).tar.gz ]; then wget $(AUTOCONF_HOST)/$(AUTOCONF_PKG).tar.gz; fi;
357 tar zxf $(AUTOCONF_PKG).tar.gz
358 cd $(AUTOCONF_PKG) && ./configure --prefix=/usr && make && make install
360 if [ ! -f $(AUTOMAKE_PKG).tar.gz ]; then wget $(AUTOMAKE_HOST)/$(AUTOMAKE_PKG).tar.gz; fi;
361 tar zxf $(AUTOMAKE_PKG).tar.gz
362 cd $(AUTOMAKE_PKG) && ./configure --prefix=/usr && make && make install
364 # Install libmemcached from the official project source
365 install_libmemcached:
366 if [ ! -f $(LIBMEMCACHED).tar.gz ]; then wget $(LIBMEMCACHED_HOST)/$(LIBMEMCACHED).tar.gz; fi;
367 tar xzf $(LIBMEMCACHED).tar.gz
368 cd $(LIBMEMCACHED) && ./configure && make && make install
370 # Install a newer version of libxslt
372 if [ ! -d $(XSLT) ]; then wget $(XSLT_HOST)/$(XSLT).tar.gz; fi;
373 tar xzf $(XSLT).tar.gz
374 cd $(XSLT) && ./configure --with-libxml-prefix=/usr/local && make && make install
376 # Install a newer version of libxml2
378 if [ ! -d $(XML2) ]; then wget $(XML2_HOST)/$(XML2).tar.gz; fi;
379 tar xzf $(XML2).tar.gz
380 cd $(XML2) && ./configure && make && make install
383 make -C $(LIBJS_PERL) clean
384 make -C $(XML2) clean
385 make -C $(XSLT) clean
386 make -f Makefile.ref -C js/src/ clean
389 # ------------------------------------------------------------------
390 # - DEBIAN ---------------------------------------------------------
393 # link the apache modules in
394 for m in $(DEB_APACHE_MODS); do a2enmod $$m; done;
396 # adds a placeholder module so apxs will be happy
397 if [ ! "$$(grep mod_placeholder /etc/apache2/httpd.conf)" ]; then \
398 echo -e "#\n#LoadModule mod_placeholder /usr/lib/apache2/modules/mod_placeholder.so" \
399 >> /etc/apache2/httpd.conf; \
402 # Install the debian-specific dependencies
404 $(APT_TOOL) install $(DEBS)
406 # Install the debian-specific dependencies for more modern distros
408 $(APT_TOOL) install $(EXTRA_DEBS)
410 install_extra_debs_squeeze: install_extra_debs
411 $(APT_TOOL) install $(EXTRA_DEBS_SQUEEZE)
413 # Install even more packaged dependencies on modern distros
414 install_extra_debs_lucid:
415 $(APT_TOOL) install $(EXTRA_DEBS_UBUNTU_LUCID)
419 yum -y install $(FEDORAS)
423 yum -y install $(CENTOS)
427 for m in $(CENTOS_PERL_FORCE); do perl -MCPAN -e "CPAN::Shell->force(qw#install $$m#);"; done
428 for m in $(CENTOS_PERL); do perl -MCPAN -e "install \"$$m\";"; done
429 for m in $(CENTOS_PERL_VERSION); do perl -MCPAN -e "CPAN::Shell->install \"$$m\";"; done
430 for m in $(CENTOS_PERL_NOTEST); do perl -MCPAN -e "CPAN::Shell->notest('install', \"$$m\";"; done
431 for m in $(CENTOS_PERL_LOCAL); do LD_LIBRARY_PATH=/usr/local/lib:/usr/lib:/lib perl -MCPAN -e "install \"$$m\";"; done
433 # We need to add /usr/local/lib to the ldconfig list of directories on CentOS,
434 # if it is not already there
436 if [ "$$(ldconfig -v 2> /dev/null | grep '^/usr/local/lib' | wc -l)" -eq 0 ]; then \
437 echo '/usr/local/lib' > /etc/ld.so.conf.d/local.conf; \
441 # vim:noet:sw=4:ts=4: