Michele Morgan [Tue, 18 Apr 2017 16:11:01 +0000 (12:11 -0400)]
LP#1075401: adjust two fields in the legacy Serials Copy Template editor
This commit changes the Age Protection and Circ as Type fields to links in
the fm_IDL.xml to allow the template to read the data in the fields. It also
changes the owning_lib reporter type to org_unit so the org unit shortname
is displayed in the grid view, along with fixing the config.floating_group cfg
FM settings so that the name is displayed instead of the ID.
[Note from Galen: the forthcoming web staff serials module's serial
copy template editor already provided drop-downs for those two fields,
but the IDL changes remain beneficial.]
...initial hook
...better stock template for labels, and a | wrap filter
...pull in some Library Settings for Print Labels
...Reset to Default button for templates for both receipt and item print labels
...toward tabs for Print Label interface
...template management for print labels
...bundle the Call Number Template in with saved templates
...manual editing of cn's for print labels
...And affixes in the stock CN template.
...Settings tab for print labels
...add Print Labels action to Copy Buckets
...and some other cosmetic tweaks to the Actions menu
...add Print Labels to Holdings View
...provide MVR's for use with Print Labels
...better than super simple record, but Display Fields will be better yet later on
...new org unit settings for print labels
...and fix to stock call number template for affixes
...and cn_wrap filter for call numbers
...handle null location affixes
...implement Print Item Labels on Save & Exit in vol/copy editor
Signed-off-by: Jason Etheridge <jason@EquinoxInitiative.org> Signed-off-by: Bill Erickson <berickxx@gmail.com>
Dan Scott [Sat, 8 Apr 2017 13:26:42 +0000 (09:26 -0400)]
LP#1681095 Browser cache-busting key for longer expires
Extend the support for cache-busting that we added with autogen's generation of
ctx.eg_cache_hash for core JavaScript assets to other assets such as images,
stylesheets, and additional JavaScript. This will enable us to set very long
cache times for our assets, which can then be controlled explicitly by setting
eg.cache_key in config.tt2, or by default any time you run autogen.
Addresses TPAC and KPAC
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Josh Stompro <stomproj@larl.org> Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
LP#1706365: cursor for record menu items should be a pointer
When using the Mark For or Other Actions menus on the bib record page, the
cursor becomes an i-beam while hovering over the menu items instead of the
expected pointer. This commit adds an empty href attribute to the a tag for menu
items so that a pointer displays instead.
Test plan:
Log into the web client and retrieve a record. Click the 'Mark For' menu on the
record page. Pre-patch, as you scroll through the menu items, the cursor will
turn into an i-beam, indicating that text can be selected. Post-patch, the
cursor will be the expected pointer that typically displays for links.
Galen Charlton [Mon, 7 Aug 2017 15:15:57 +0000 (11:15 -0400)]
LP#1694529: tweak wording of collision alert message
And here's a test plan for the patch series as a whole:
[1] In the web staff client, retrieve a patron that has some
loans. In a separate window, open the patron editor
for that same patron.
[2] In the first window, mark one of the patron's loans
as either claims returned or claims never checked out.
[3] In the second window, make a change and attempt to save
the record. You should see a alert dialog saying that
the record could not be saved.
Bill Erickson [Thu, 29 Jun 2017 21:53:56 +0000 (17:53 -0400)]
LP#1694529 Patron editor friendly xact ID collision alert
Display a friendly alert dialog message to staff when attempting to save
a patron record that has been externally modified during editing. This
is an improvement over the existing debug alert with JSON data.
Signed-off-by: Bill Erickson <berickxx@gmail.com> Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
LP#1684126: copy images used by staff portal outside of /xul/
This patch ensures that various images used by the web
staff client will remain available whenever the last bits
of the XUL client are removed.
To test:
[1] Apply patch
[2] Verify that all of the images on the web staff client's
splash page are displayed.
[3] Retrieve a patron that has an alertable condition (e.g.,
the patron record is expired. Verify that the stop sign
image is displayed.
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org> Signed-off-by: Ben Shum <ben@evergreener.net>
Galen Charlton [Wed, 17 May 2017 15:22:25 +0000 (11:22 -0400)]
LP#1411699: ensure that Dojo remains available for added content tab
This patch is meant to avoid a (very minor) silent regression
introduced by the previous patch; ultimately, though, the
functionality of tweaking the visibility of added content types
in the added content tab should be rewritten to drop any
requirement of Dojo.
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org> Signed-off-by: Bill Erickson <berickxx@gmail.com>
Dan Scott [Sun, 2 Apr 2017 14:45:00 +0000 (10:45 -0400)]
LP#1411699: Make Dojo conditional for advanced search
While the copy locations filter is a core feature, it surfaces only in the
advanced search page. The current behaviour forces Dojo and all of its
dependencies to be loaded for every catalogue page.
By making it conditional on the advanced search page, we save approximately
600ms to first meaningful paint on the rest of the catalogue pages.
To test:
[1] Apply the two-patch series
[2] After applying the patch, verify that the copy location filter
on the advance search page functions. Also verify that
the JavaScript on the record details page that tweaks
the visiblity of sub-tabs in the added content tab
continue to work.
[3] Verify that other components that currently depend on Dojo,
such as the ebook API, continue to work.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org> Signed-off-by: Bill Erickson <berickxx@gmail.com>
Galen Charlton [Wed, 2 Aug 2017 18:39:23 +0000 (14:39 -0400)]
LP#1705478: (follow-up) emit prefix subfield before call number
This patch reorders the subfields so that the prefix (if present)
is emitted in 852$k /before/ the call number subfield ($j); that way,
MARC parsers return subfields in their order in the field (and
humans) will see the components of the call number in their
expected order.
This patch ensures that the specified thaw date is valid,
as otherwise specifying a thaw date of "13/08/2017" (when,
at present, only dates of the form mm/dd/yyyy are accepted)
would result in an Apache internal server error.
If an invalid date is supplied, the thaw date is ignored, meaning
that the hold request will be placed as suspended but will not
automatically reactivate.
This commit adds some bells and whistles to the basic functionality:
1. Adds two new styles in style.css.tt2 for toggled blocks and inline
text. These styles allow text with id attributes beginnging with
certain strings to be normally hidden and then shown when they are the
target of an active anchor. Only the block form is currently used,
but the inline text version may prove useful in the near future.
2. Moves the "Suspend this hold?" language above the checkbox and adds
a variant to make it clear that all of the holds will be suspended
when multiple holds are placed.
3. Adds the question mark graphic with mouseover help text indicating
that a suspended hold will not be fulfilled until it has been
activated.
4. Adds a "Set activation date" anchor to toggle the appearance of the
text input for the optional thaw date.
5. Adds a script block with a JavaScript function to toggle the
appearance of the text input for the optional thaw date and to check
the suspend hold check box when first toggled. This function returns
false to prohibit the href of the anchor from firing and toggling the
appearance via CSS. If JavaScript is disabled, the input's appearance
will be toggled via CSS, but the checkbox will not be checked
automatically.
6. Adds language to the place hold results page to indicate if the
hold is suspended and adds the reactive date if supplied.
7. Modifies the backend holds code to not set the expire time on a
hold if it is suspended. This is a logical extension of code added
for Lp bug #1076399: Activating an expired hold cancels the hold.
PLEASE NOTE: I would very much like to keep this branch in three
commits because the first commit is Bill Ott's initial implementation
from 2013. The second commit is a fix to Bill's work required to make
it work with modern ttopac. This third commit overs the expansion of
the functionality to meet MassLNC requirements. I think it would
behoove us to keep these three pieces of work in distinct commits.
Return of an option from JSPAC, the ability to immediately suspend a
hold when it's placed.
TODO: As noted in the code for editing a hold, a calendar selection
would be preferred to requiring users to enter a valid date manually.
This commit was a patch submitted by Bill Ott to Launchpad in August
2013. Jason Stephenson applied the patch on April 22, 2017 and
resolved conflicts caused by the addition of a metarecords hold
feature in the TPAC. The revised patch was committed with the
original author and commit timestamp.
Signed-off-by: Bill Ott <bott@grpl.org> Signed-off-by: Jason Stephenson <jason@sigio.com> Signed-off-by: Kathy Lussier <klussier@masslnc.org> Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Quoth the Perl docs: "An experimental feature added in Perl 5.14 allowed each,
keys, push, pop, shift, splice, unshift, and values to be called with a scalar
argument. This experiment is considered unsuccessful, and has been removed.
The postderef feature may meet your needs better."
The specific instance here was probably just a typo or thinko the did the
right thing on Perls "of a certain age" ... so, we fix that here, now.
To test:
[1] Upon applying the patch, verify that Perl 5.24+ will successfully
compile metabib.pm, that the open-ils.storage service will
start up, and that catalog searches continue to work.
Signed-off-by: Mike Rylander <mrylander@gmail.com> Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
LP#1706148 - Hide "Hold is behind Circ Desk" checkbox in XUL patron registration.
When the library setting for "Behind Desk Pickup Supported" is not enabled then
the checkbox for "Hold is behind Circ Desk" should be hidden.
Test Plan - before fix:
1. Check to make sure that the "Behind Desk Pickup Supported" library setting is
unset or false.
2. Open the patron registration screen in the XUL staff client and see that the
user settings checkbox for "Hold is behind Circ Desk" exists.
After Fix Applied:
1. Check to make sure that the "Behind Desk Pickup Supported" library setting is
unset or false.
2. Open the patron registration screen in the XUL staff client and see that the
user settings checkbox for "Hold is behind Circ Desk" no longer is shown.
3. Change the library setting in question to True.
4. Reload/reopen the patron registration screen and see that the checkbox now
is visible.
Signed-off-by: Josh Stompro <stomproj@larl.org> Signed-off-by: Dan Pearl <dpearl@cwmars.org> Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Dan Wells [Fri, 21 Jul 2017 18:28:16 +0000 (14:28 -0400)]
LP#1635737 Use new OpenSRF interval_to_seconds() context
Use the optional context for interval_to_seconds() to account for the
variable length of duration components. For example, "1 day" may be
shorter or longer than 24 hours during a time change event, "1 month"
may be shorter or longer depending on which month it is currently, etc.
Also, remove some timestamp munging, as that happens within
interval_to_seconds() already.
Signed-off-by: Dan Wells <dbw2@calvin.edu> Signed-off-by: Mike Rylander <mrylander@gmail.com>
LP#1670448: Rearrange space for bib record action buttons
The addition of the view/place order button pushed other action buttons to a
2nd row. We also need to make room for the forthcoming serials button. This
commit 1) changes the div classes for the navigation buttons and action buttons
so that it is now a 50/50 split of screen space and 2) moves some action items
into a 'Other Actions' menu.
Signed-off-by: Kathy Lussier <klussier@masslnc.org> Signed-off-by: Bill Erickson <berickxx@gmail.com>
Cesar Velez [Fri, 14 Jul 2017 17:25:44 +0000 (13:25 -0400)]
LP#1695062 - webstaff Make non-freetext required stat cats actually required
In the Patron registration form this custom drop down needed to
have an ng-class attribute with the proper
object expression in order to do add class ng-invalid if the
stat cat was required and not there.
Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>
Adds a small nosound.wav file which may be used by administrators to
silence a specific alert for all users on the server.
To test:
[1] mkdir -p /openils/var/web/audio/notifications/success/patron/
[2] cd /openils/var/web/audio/notifications/success/patron/
[3] ln -s ../../nosound.wav by_search.wav
[4] Perform a patron search in the browser client and confirm no sound
is played upon successful search.
If patron searches have recently been performed, step 4 may require a
cache clear, a different tab, browser restart, eye of newt.
Jason Boyer [Fri, 7 Jul 2017 14:24:35 +0000 (10:24 -0400)]
LP1702911: Correct Barcode State in Add Item
When adding an item from the MARC editor the barcode
state was incorrect because the empty_barcode flag
is set on the copy and then not changed after
assigning a barcode. At that point the only way to
alter the flag is modifying the barcode in the UI,
which the user likely would not think to do. This
causes the Save buttons to remain disabled.
To test pre patch:
Open a record in the MARC editor, check Add Item
Add a call number label and barcode above, click Save
In the vol/copy editor, try as you might, you can't save. :(
To test post-patch:
Open a record in the MARC editor, check Add Item
Add a call number label and barcode above, click Save
In the vol/copy editor, the Save buttons will already be enabled
(barring required stat cats, etc.)
Cesar Velez [Wed, 28 Jun 2017 21:52:22 +0000 (17:52 -0400)]
LP#1691264 - WebStaff Add stickiness to Patron Search Org-level selector
When searching for users within the patron app, the org-unit selector
dropdown would stay cached to the last used value, but reloading the
PAtron sarch view would reset that. This adds stick-setting attribute
to that custom dropdown and LocalStorage via key eg.circ.patron.search.ou
Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>
Signed-off by: Jennifer Pringle <jennifer.pringle@bc.libraries.coop> Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Josh Stompro [Mon, 30 Jan 2017 14:21:40 +0000 (08:21 -0600)]
LP#1312837 - Item Status - Alternate View - Holds/Transit tab: Transit and Hold
information does not refresh
When switching between copies that have different transit and hold information,
the data in the hold/transit tab doesn't get cleared when there isn't a new hold
or transit to clear it.
Test Plan:
Acquire the barcodes for 3 copies, one that is available, on that is in transit
and one that is captured for a hold.
Before Change:
1. Open item status alternate view and switch to hold/copy tab. Note that the
labels default to saying that the item is in transit and captured for a
hold before any barcodes are scanned.
2. Enter the available item and note that the labels changed to not in transit
, not captured.
3. Scan in the In Transit for Captured item and note that the labels don't
change when they should.
4. Scan in the available item and note that the hold or transit data isn't
cleared.
After Change:
1. Enter the barcodes for the 3 copies with different statuses and note that
the Holds/Transit information now updates correctly.
LP#1673857: Disable browser autocomplete for tag entry
Adds an autocomplete="off" to the input field to stop browsers
from trying to fill in values. When the browser fills in values
for tags it can prevent the typeahead feature from being used
easily.
Overall test plan
-----------------
[1] In Server Admnistration -> Copy Tag Types, test creating
and modifying copy tag types.
[2] In Server Admnistration -> Copy Tags, test creating
and modifying copy tags.
[3] In the volume/copy editor, test use of the 'Copy Tags'
button to link or unlink tags from copies.
[4] In the volume/copy editor, test use of the 'Copy Tags'
button to create and link new tags on the fly.
[5] In the copy buckets interface, test use of the 'Apply Tags'
grid action to link tags to copies.
[6] In the catalog, test the copy_tag(type, search) and
copy_tag(*, search) filters. Verify that tag visiblity
(as controlled by the "public" flag on a copy tag) is
respected.
[7] In the catalog, test the display of copy tags in
the copy table on the record summary page.
[8] Test the opac.search.enable_bookplate_search library setting
and verify that it causes a 'Digital Bookplates' search option
to be added.
Galen Charlton [Fri, 31 Mar 2017 22:31:52 +0000 (18:31 -0400)]
LP#1673857: interface for applying tags from copy buckets
The copy buckets interface now includes an 'Apply Tags'
action that can be used to map tags to a set of selected
copies. Note that interface cannot be used to remove
tag mappings; the volume/copy editor is needed to do that.
Galen Charlton [Thu, 11 May 2017 15:29:25 +0000 (11:29 -0400)]
LP#1673857: add ability to set copy tags in volume/copy editor
The copy editor now has a 'Copy Tags' button that can be used
to assign or remove tags from a copy. A typeahead widget is
used to allow the user to select an existing tag, but users can
also use this interface to create an entirely new tag on the fly.
Galen Charlton [Wed, 29 Mar 2017 20:15:31 +0000 (16:15 -0400)]
LP#1673857: teach catalog how to search and display copy tags
When the opac.search.enable_bookplate_search library setting is
set to true, the catalog will display a "Digital Bookplates" search
field in the drop-downs on both the search bar and the advanced search
page. Using this will add a "copy_tag(*, search_terms)" filter
to the search, i.e., all visible copy tags will be searched regardless
of type. Users can also use the copy_tag() search filter directly.
Visible copy tags are displayed in the copy table in the record
summary page. Note that copy tags are displayed regardless of whether
or not opac.search.enable_bookplate_search is on or off.
These are methods to retrieve the set of copy tags associated
with a copy, scoped to an OU and its descendents at a
optional depth. The .staff version includes both
public and non-public notes (and requires STAFF_LOGIN
permission).
Copy tags can be used as a search filter in the catalog. Two
variations are supported:
* copy_tag(type_code, search_terms)
Search for records that have copies that are linked to tags
whose value matches the search terms and whose type's
config.copy_tag_type.code matches the specified
type_code. E.g., "copy_tag(bookplate, donated by jane smith)"
* copy_tag(*, search_terms)
Search for records that have copies that are linked to tags
whose value matches the search terms, regardless of type.
The copy_tag() search filter takes the OPAC-visiblity (as determined
by asset.copy_tag.pub) of the tag into account.
Galen Charlton [Fri, 17 Mar 2017 21:46:37 +0000 (17:46 -0400)]
LP#1673857: schema, IDL, library settings & perms for copy tags
Three new tables are added to store copy tags:
* config.copy_tag_type
Defines types that can be used for distinguishing between
classes of copy tags when searching the catalog. The
seed data includes a 'bookplate' type by default. The new
permission ADMIN_COPY_TAG_TYPES controls C/U/D access to this
table.
* asset.copy_tag
The actual copy tag values. Copy tags have both labels and values,
and since at least one interface allows creating copy tags
on the fly, a trigger will set the value of a new tag
to its label if the value is null. asset.copy_tag also has a flag
for setting whether given tag should be searchable (and visible)
in the public catalog or not. The new permission ADMIN_COPY_TAG
controls C/U/D access to this table.
* asset.copy_tag_copy_map
This stores the link between copies and their tags. Only the
UPDATE_COPY permission is required in order to set tag mappings.
The new library setting is opac.search.enable_bookplate_search, which
controls whether or not to display a "Digital Bookplate" entry in the
catalog search fields dropdowns.
Mike Rylander [Tue, 14 Feb 2017 20:59:53 +0000 (15:59 -0500)]
LP#1664715: Hold ratio template ignores some copies
The relatively new report template "Hold/Copy Ratio per Bib and Pickup Library
(and Descendants)" only includes copies that are at locations that are
actually pickup libraries of holds. For instance, if you have two branches (A
and B) in a system, each with 10 copies attached to a bib, but a hold only at
branch A, the ratio calculated at the system level sees 10 copies rather than
twenty. This has the effect of inflating the hold side of the hold/copy ratio.
The SQL definition is adjusted here to count copies across the entire branch
of the org tree per bib, rather than through a join that restricts to those
branches that are pickup libraries for a relevant hold.
Upgrade note: Report templates using the Hold/Copy Ratio at Pickup Library
and Descendants data source will need to be re-created to benefit from this
bug fix.
LP#1705731: background batch MARC edits now report status less verbosely
Rather than repeatedly inserting and fetching potentially
very large arrays of per-record status statements from the
anon cache, batch MARC edits that are run in the background
now report counts.
This patch changes how open-ils.cat.container.template_overlay.background
populates the anonymous cache; note that streaming status updates
if calling open-ils.cat.container.template_overlay instead are
*not* changed.
To test
-------
[1] Set up a MARC Batch Edit run using a reasonably large bucket
as a source records.
[2] Verify that progress is reported correctly during the run.
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org> Signed-off-by: Bill Erickson <berickxx@gmail.com>
Cesar Velez [Thu, 29 Jun 2017 17:27:40 +0000 (13:27 -0400)]
LP#1668314 - Webstaff make marcEditor's flateditor checkbox sticky
Just followed the same pattern of using $watch and localstorage
to store a boolean for FlatEditor checkbox. Made $scope.flatEditor
be an object wrapping an isEnabled :bool to avoid *future* ng-if
parent scope issues that could (potentially) occur.
Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>
Adjust to zero was not actually adjusting to zero on negative balances
in at least some cases. This patch corrects that behavior.
Test plan:
[1] Generate multiple overdue billings on an overdue circ.
[2] Apply a payment (cash or forgive) to resolve the overdue billings.
[3] Checkin the item using backdated checkin or amnesty mode, such that
the overdue billings are automatically voided, resulting in a
negative balance.
[4] Adjust to zero. A single new manual adjustment billing is created,
reinstating one overdue billing, and then the adjust-to-zero process
exits. The negative balance has been reduced by the amount of one
overdue billing, rather than being fully adjusted to zero.
[5] Apply the patch and restart services.
[6] Repeat steps 1-3 with a new circulation.
[7] Adjust to zero. This time, the balance should be correctly adjusted
to zero, instead of exiting prematurely with an outstanding
negative balance.
Signed-off-by: Jeff Davis <jdavis@sitka.bclibraries.ca> Signed-off-by: Dan Wells <dbw2@calvin.edu>
Cesar Velez [Mon, 10 Jul 2017 20:47:26 +0000 (16:47 -0400)]
LP#1702756 - WebStaff fix for bug that was introduced by 997e2772
While addressing LP#1696495 fixed the bug of user settings caching
improperly between patron edits, it caused an issue when the regctl
was loaded for registering a new patron. This corrects that.
Rogan Hamby [Fri, 9 Jun 2017 18:44:12 +0000 (14:44 -0400)]
LP#1697066: changing copy location search box from 3 to 4
This patch makes the number of options displayed in the
shelving location selector on the public catalog advanced
search page 4, matching the other selectors.
The copy details table was styled to not wrap, which sometimes pushed table
contents off the page, particularly when some of the copies are conjoined
items. This commit removes the style that was preventing wrapping.
Test plan:
Load record 15 in the Concerto dataset. Before the patch is loaded, you'll
see that some of the content in the copy details table is pushed off the
screen and requires horizontal scrolling. Post-patch, all of the copy
details will display on screen without horizontal scrolling. In addition
to the change in the Conjoined Items, you also might see some text wrapping
in the Shelving Location and Status columns.
Jason Boyer [Fri, 14 Jul 2017 19:01:09 +0000 (15:01 -0400)]
LP1704463: Item Status Fields Correction
The Loan Duration and Fine Level fields were
being incorrectly pulled from unrelated fields
on the most recent circ rather than the item.
Signed-off-by: Jason Boyer <jboyer@library.in.gov> Signed-off-by: Chris Sharp <csharp@georgialibraries.org> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Cesar Velez [Thu, 8 Jun 2017 15:33:31 +0000 (11:33 -0400)]
LP#1677000 - webstaff Adds a 'has-notes visual indicator' for patrons with notes.
Made the indicator be clickable and route to Other->Notes.
Other ways to address this not mentioned in LP would be
using a glyphicon instead, or moving the Notes submenu item out of Others tab.
Or even making the entire tab/menu be resposive, and collapsing into an Others submenu
only when needed.
Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>
Signed-off-by: Jason Etheridge <jason@equinoxinitiative.org>
Avoid 'grunt test' failure "Unknown provider: $routeProvider" resulting
from $routeProvider references in startup.js (egCoreMod) without first
loading the ngRoute module.
$routeProvider is not needed by the original patch.
Signed-off-by: Bill Erickson <berickxx@gmail.com> Signed-off-by: Mike Rylander <mrylander@gmail.com>
When trying to utilize the Recall functionality, Evergreen would fail to update
targeted circulations (truncate the due date, etc.) In the logs, we would have
an error like this:
[] open-ils.storage [ERR ::action.pm:1597:] Processing of hold failed:
Can't locate object method "workstation" via package "action::circulation" at
/usr/local/share/perl/5.14.2/OpenILS/Application/Storage/CDBI.pm line 181.
We first tried adding the workstation column to Storage/CDBI/action.pm, but a
similar message would then appear instead: Can't locate object method
"checkin_workstation"
This sidesteps the problem entirely.
Thanks to Mike for the solution!
Signed-off-by: Jason Etheridge <jason@EquinoxInitiative.org> Signed-off-by: Mike Rylander <mrylander@gmail.com>