Jason Etheridge [Thu, 22 Sep 2011 13:17:50 +0000 (09:17 -0400)]
SMS texting
For SMS functionality we're basically converting a carrier and a phone number
into an email address and sending via SMTP like other email notifications.
There is administrative UI for configuring these mappings:
Admin -> Server Settings -> SMS Carriers
The permission ADMIN_SMS_CARRIER is needed to use this interface. In a stock
Evergreen installation, this is given to the Global Administrator group.
In this interface, any occurance of "$number" in the Email Gateway field will
change into the pertinent SMS phone number when the mapping gets used. We're not
doing anything fancy here for verifying or munging phone numbers, but you could
do munging in the pertinent SMS Action/Trigger templates, or better, contribute
code for the OPAC templates and/or the utility method get_sms_gateway_email in
Trigger/Reactor.pm.
Our set of stock mappings comes from
http://en.wikipedia.org/wiki/List_of_SMS_gateways
There's no automated process for keeping this up-to-date, though some volunteer
with a Wikipedia account could add the page to their watchlist for changes and
let us know if something needs changing.
Set the org unit setting "SMS: Enable features that send SMS text messages."
(database name "sms.enable") to True to expose the following:
* SMS notification widgets in the TT-OPAC hold placement interface (to notify
when a hold is ready for pickup)
* "(SMS)" links next to call numbers on the TT-OPAC record details page. The
interface spawned by these links require user authentication by default, but
this can be changed by setting the org unit setting "SMS: Disable auth
requirement for texting call numbers." to True. The database name for that
setting is "sms.disable_authentication_requirement.callnumbers".
* New options in TT-OPAC My Account -> Account Preferences -> Notification
Preferences (we also add in some missing prefs for holds outside of SMS)
There are two pertinent Action/Trigger templates under Admin -> Local
Administration -> Notifications / Action Triggers:
* SMS Call Number
* Hold Ready for Pickup SMS Notification
Don't disable these. We rely on the sms.enable YAOUS as the master on/off
switch.
Also, it's probably best to have just one sms.enable for the whole consortium.
If you mix and match on/off settings here, then user preferences for SMS can get
blown away if the user updates their settings in the TT-OPAC at an org where SMS
is disabled. Hrmm, the same would probably happen if the user jumps between the
TT-OPAC and the original JS-PAC.
Signed-off-by: Jason Etheridge <jason@esilibrary.com>
Jason Etheridge [Sat, 7 Jan 2012 02:02:06 +0000 (18:02 -0800)]
Fix shelf_expire_time closed date overlap test
One-liner courtesy of berick.
* Steps to test
This is time and timezone sensitive, so on the server:
Change your timezone to America/Los Angeles: sudo dpkg-reconfigure tzdata
Stop your NTP server: sudo /etc/init.d/ntp stop
Set the time to 5pm: sudo date --set 17:00:00
Stop Evergreen, Restart Postgres, Start Evergreen
On the client:
Make sure the timezone is set to Pacific time.
1) Change the Library Setting "Default hold shelf expire interval" in the Holds group to have a value of "7 days" (without the quotes) for org BR1 (or if there is an existing value, you can keep it).
2) Create a bib with one item: htest1 (Status of Available)
3) Place a title level hold on the bib
4) Check in htest1 (it should get captured for the hold)
5) Browse the Hold Shelf and note the Shelf Expire Time for the hold that captured htest1 (it should be a week from now, unless you already have a conflicting closed date configured)
6) Cancel the hold and re-check-in htest1 (to remove the Hold Shelf status)
7) In the Closed Dates Editor, Add Single Day Closing for the date noticed previously in the Shelf Expire Time for BR1.
8) Place a title level hold on the bib
9) Check in htest1 (it should get captured for the hold)
10) Browse the Hold Shelf and note the Shelf Expire Time for the hold that captured htest1 (now the bug is illustrated if you get the same date for Shelf Expire Time as you did before, since that day is now a Closed Date and should be skipped over. The patch should fix this.)
Signed-off-by: Jason Etheridge <jason@esilibrary.com> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Major enhancements to openils.widget.PCrudFilterDialog
openils.widget.PCrudFilterDialog is (now) a dijit that allows users to define
inclusionary filters based on any number of rows that specify a field
from a given fieldmapper class, an operator, and a value (or range of
values, for the [not] between operator). The resulting filter is
suitable for use as the where clause of a pcrud search call.
AutoGrid has an option, showLoadFilter, that allows you to easily
provide a filter dialog in any AutoGrid-based interface, with some minor
caveats (see the comments at the top of the source for
openils.widget.PCrudFilterDialog). AutoGrid will also pass along the
suppressFilterFields option, which works analagously to the
suppressEditFields option. You can also build your own interfaces to
use this dijit without AutoGrid, if desired.
Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Jason Etheridge [Tue, 3 Jan 2012 20:46:25 +0000 (15:46 -0500)]
More aggressive recalc of standing penalties
In the staff client, the Refresh button in the patron display will explicitly
ask the server to recalculate standing penalties for the patron. Other automatic
refresh-like behavior meant to synchronize parts of the patron display will not
do this.
This change tweaks the logic to ask for a recalculation with all refresh-like
behavior in the patron display, and will catch such things as staff changing the
user's permisssion profile.
An example of how you might test this:
Admin -> Local Administration -> Group Penalty Thresholds
Dan Scott [Thu, 29 Dec 2011 18:46:24 +0000 (13:46 -0500)]
SETVAL the permission.grp_tree sequence after adding pinned IDs
If we do not update the associated sequence after adding pinned IDs,
sites will be unable to add new permission groups until enough attempts
have failed. Let's bypass that little bit of pain.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Dan Scott [Thu, 29 Dec 2011 18:33:38 +0000 (13:33 -0500)]
Prevent permission group conflicts in 2.1 upgrade script
The 2.0-2.1 upgrade script relies on pinned IDs for permission.grp_tree
entries, which might conflict with custom permission groups that a site
might have added previously. A little manipulation can make life safe
for the pinned IDs.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Mike Rylander <mrylander@gmail.com>
James Fournie [Wed, 16 Nov 2011 00:56:16 +0000 (16:56 -0800)]
Making the user profile selector disabled rather than readonly
in the case of a user editing their own account. This prevents
a nasty bug whereby Dojo widgets with the readOnly flag set
become labels and therefore do not correctly hold a 'value'
like a normal form widget. See LP#806625 for details.
Signed-off-by: James Fournie <jfournie@sitka.bclibraries.ca> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Dan Scott [Wed, 30 Nov 2011 04:09:47 +0000 (23:09 -0500)]
Prevent null 852 $a in marc_export
852 $a is supposed to correspond to the institution holding the item
from which access is given, according to the MARC Format for Holdings
Data specification. As the org unit shortnames typically don't
correspond to one of the MARC Code List for Organization entries, we've
assumed that users will define the --location parameter; however, if
that parameter isn't defined, the empty string is used and an empty
subfield is generated. This, in turn, makes other MARC-parsing tools
unhappy. So, only generate an 852 $a if we have an actual value for the
--location parameter.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Instead of only archiving the copy location with aged circs, do so with all
circs, using the copy location at time of circ. This allows for running of
reports on the copy location even after the item is no longer in it.
Statistical Categories
Add a flag to statistical categories to allow them to be archived with all
circulations (at checkout). Reports can then be run on regular and aged
circulations based on the contents of the statistical categories.
This patch was inspired by Tim Spindler's submission to
https://bugs.launchpad.net/evergreen/+bug/798255 - thanks Tim!
Signed-off-by: Thomas Berezansky <tsbere@mvlc.org> Signed-off-by: Dan Scott <dscott@laurentian.ca>
Dan Scott [Thu, 5 Jan 2012 05:49:10 +0000 (00:49 -0500)]
Remove vandelay.dtd from i18n Makefile and dirs
Back in 46e233722f9d1ccec1bd97816bb055caa12f8096, vandelay.dtd was
removed in favour of the inline Template Toolkit localizations - so pull
vandelay.dtd references out of the i18n Makfile to avoid corresponding
errors.
Remove vandelay POT and PO files as well.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Dan Scott [Thu, 5 Jan 2012 04:57:00 +0000 (23:57 -0500)]
Add language update script for Launchpad -> Evergreen
Launchpad uses different names for locales than we do in Evergreen, and
we want to only update translations that are actually new or have
changed in Launchpad, so dump some intelligence into a script that can
help us with that work.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Dan Scott [Thu, 22 Dec 2011 22:13:29 +0000 (17:13 -0500)]
OpenURL resolution in TPAC - further cleanup
We appear to be getting one null or empty value in the args.issns array,
which was causing spurious lookups of null ISSNs, so skip the entry if
it is an empty string.
Also, switch from the product-specific "sfx" variable name to the
product-neutral "openurls" as we have CUFTS in the mix these days.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Art <artrhyno@uwindsor.ca>
Dan Scott [Thu, 22 Dec 2011 21:08:07 +0000 (16:08 -0500)]
Make resolver HTTP timeout setting implementation neutral
Rather than exposing the underlying mechanism (LWP) for the HTTP
request via the "lwp_timeout" setting, use "request_timeout" so that if
we switch to a different HTTP library the setting name doesn't
contradict it.
Also, add an example setting to opensrf.xml.example.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Art <artrhyno@uwindsor.ca>
where "10" is the number of seconds for a timeout. A default timeout can be
specified in the opensrf.xml file in the ResolverResolver section as well:
<lwp_timeout>30</lwp_timeout>
from TPAC, a request can be also include a timeout option:
[% IF openurl.enabled == 'true';
FOR issn IN args.resolver_issns;
resolver = ResolverResolver.resolve_issn(issn, openurl.baseurl,20);
FOR res IN resolver;
%]
where "20" is the number of seconds for a timeout.
In working through this, I found some bugs in my resolver collection
code in misc_util.tt2 for isbns which I have addressed.
Signed-off-by: Art Rhyno <artrhyno@uwindsor.ca> Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Art <artrhyno@uwindsor.ca>
Bill Erickson [Wed, 28 Dec 2011 18:58:45 +0000 (13:58 -0500)]
Use hold current shelf lib to determine availability : hold shelf browse
The availability of a hold can now be determined by
hold.current_shelf_lib == hold.pickup_lib.
This change updates the staff client code to only display the "available
on" value (i.e. shelf_time) in the holds list when the current_shelf_lib
== pickup_lib and not just that it's captured and on a shelf.
Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Tue, 27 Dec 2011 21:34:46 +0000 (16:34 -0500)]
Use hold current shelf lib to determine availability : A/T validator
The availability of a hold can now be determined by
hold.current_shelf_lib == hold.pickup_lib.
This change updates the HoldIsAvailable action/trigger validator to use
the new test. I've left the original belt-and-suspenders checks in
place and marked them as redundant within the code for reference.
Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Tue, 27 Dec 2011 20:47:00 +0000 (15:47 -0500)]
Alter hold pickup lib from shelf avoids transit
When the pickup library for a hold is changed while the hold is on the
shelf, we no longer put the copy into transit to the new location.
Instead, we clear the shelf_expire_time (to prevent premature
expiration) and leave the hold and copy otherwise untouched.
This makes it possible for staff to identify items that are sitting on
the holds shelf that need to be put into transit to a new pickup
library. The transit will be created when the item is checked in at the
originating library.
Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Wed, 28 Dec 2011 16:17:37 +0000 (11:17 -0500)]
New hold status for "Wrong Shelf"
Adds a new hold status code (8) to indicate when a hold is sitting on
the wrong holds shelf.
In the OPAC, a hold status of 8 is displayed as in-transit. Neither
waiting-for-copy or in-transit are entirely accurate. In-transit makes
slightly more sense, since the copy is captured and (slowly) making its
way to the correct shelf.
Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Tue, 27 Dec 2011 20:55:33 +0000 (15:55 -0500)]
Hold current_shelf_lib for shelf browse API
Use the new current_shelf_lib column on hold requests to determine which
copies are on a given shelf. This also removes the shelf_time filter
since shelf_time is guaranteed to be set if current_shelf_lib is set.
Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Tue, 27 Dec 2011 18:18:08 +0000 (13:18 -0500)]
Hold current_shelf_lib API for setting/clearing.
Sets and clears the hold.current_shelf_lib value as appropriate during
hold capture, transit checkin, hold resetting, etc.
Also, we now create hold transits (instead of regular transits) when a
captured copy is (unexpectedly) found at the wrong branch and needs to
transit to the pickup lib. This can happen if the captured copy simply
transits to the wrong place (existing behavior) or the pickup lib for
the hold was changed while the copy was on the shelf (new behavior).
Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Tue, 27 Dec 2011 17:19:05 +0000 (12:19 -0500)]
Hold current_shelf_lib DB and IDL
Schema, upgrade, and IDL pieces for a new
action.hold_request.current_shelf_lib column. The goal of the column is
to track the location where a hold is currently sitting on a hold shelf.
Typically, this will be the pickup library, however, if the pickup
library has changed while the hold was on the shelf, the current shelf
lib will be different.
The upgrade script sets current_shelf_lib to match the pickup_lib for
all holds that are currently active and on the shelf.
Signed-off-by: Bill Erickson <berick@esilibrary.com>
Dan Scott [Tue, 22 Nov 2011 16:55:45 +0000 (11:55 -0500)]
Avoid updating deleted call numbers for 2.0 -> 2.1 upgrade
25% of the call numbers on our production system are deleted, so
filtering out the deleted call numbers from the update in the 2.0 -> 2.1
upgrade saves a significant amount of time.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Uses the OILSProxyPermissions and OILSProxyLoginType settings, but prompts
are controlled by the Apache AuthName directive.
This module allows things like Directory Indexing and non-perl or otherwise
incompatible with the normal proxy module Response (or similar) handlers to
be password-protected.
It also supports the OpenILS::WWW::Proxy user/passwd CGI params to allow
an easier transition between the two.
For example:
<Location /authen_login/>
Options +Indexes
PerlOptions +GlobalRequest
PerlSetVar OILSProxyPermissions "VIEW_REPORT_OUTPUT"
PerlSendHeader On
AuthType Basic
AuthName "Notices Login"
PerlAuthenHandler OpenILS::WWW::Proxy::Authen
require valid-user
allow from all
</Location>
Signed-off-by: Thomas Berezansky <tsbere@mvlc.org> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Bill Erickson [Tue, 3 Jan 2012 21:41:42 +0000 (16:41 -0500)]
Coded value map index normalizer
New index normalizer which maps a coded value from the record to the
display value configured in config.coded_value_map. The normalizer is
applied with one parameter, the ctype of the coded_value_map to use for
the mapping.
E.g config.metabib_field_index_norm_map:
id | field | norm | params | pos
---+-------+------+---------------+-----
57 | 31 | 17 | ["item_lang"] | -1
* pos = -1 causes this normalizer to be applied to facet_entry's
This is primarily useful for facets. For example, you could create a
metabib_field for language and mark it as a facet_field. Applying this
index would allow the mapped language names (e.g. "French" instead of
"fre") to display as facets.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Mike Rylander <mrylander@gmail.com>
Dan Scott [Tue, 27 Dec 2011 17:31:03 +0000 (12:31 -0500)]
TPAC: Uniform search lib / depth settings
The current TPAC code uses logic embedded within the templates to
determine which org unit and depth to apply to searches.
This commit attempts to standardize the logic within the new
OpenILS::WWWW::EGCatLoader::Util::_get_search_lib() function and sets
the result as a new context variable, "search_ou". The org unit is
determined as follows (first matching condition wins):
* specific CGI "loc" value
* logged-in user's preferred search library
* logged-in user's home org unit
* specific CGI "physical_loc" value
The depth is set as follows (first matching condition wins):
* specific CGI "depth" value
* depth of the chosen org_unit
As of this commit, a library that wishes to set the a default search
org unit for any given user should set the "physical_loc" CGI param;
after the user performs their first search, the "loc" CGI param will
propagate through most interfaces. When a user clicks "Your account log
in", the user's preferred search library or home org unit will be set as
the new search lib.
At any time after that, the user can select a different org unit from
the org unit selector to explicitly set the "loc" CGI param.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Working towards parity with the JSPAC, give the user the ability to set
their preferred search library in account preferences via the org
selector. The value defaults to the user's home OU.
Also set a sane default of 10 search results per page in the absence of
any preference, as the default had been set to 5.
While we're in there, remove some of the inline styles and weird markup
in the user preference page, and refactor the O:W:EGCatLoader:Account
module to accept an easily-appended list of preferences to be set.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Dan Scott [Wed, 28 Dec 2011 02:17:02 +0000 (21:17 -0500)]
TPAC: Set search_ou context in common loader
By setting the search_ou context in load_common() after checking for a
valid user session, we can catch the remaining pages in TPAC in which
the default search library was not being set properly.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Dan Scott [Tue, 27 Dec 2011 17:31:03 +0000 (12:31 -0500)]
TPAC: Uniform search lib / depth settings
The current TPAC code uses logic embedded within the templates to
determine which org unit and depth to apply to searches.
This commit attempts to standardize the logic within the new
OpenILS::WWWW::EGCatLoader::Util::_get_search_lib() function and sets
the result as a new context variable, "search_ou". The org unit is
determined as follows (first matching condition wins):
* specific CGI "loc" value
* logged-in user's preferred search library
* logged-in user's home org unit
* specific CGI "physical_loc" value
The depth is set as follows (first matching condition wins):
* specific CGI "depth" value
* depth of the chosen org_unit
As of this commit, a library that wishes to set the a default search
org unit for any given user should set the "physical_loc" CGI param;
after the user performs their first search, the "loc" CGI param will
propagate through most interfaces. When a user clicks "Your account log
in", the user's preferred search library or home org unit will be set as
the new search lib.
At any time after that, the user can select a different org unit from
the org unit selector to explicitly set the "loc" CGI param.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Reverse Copy Location picker labels via WS Setting
If the setting is set then place the name before the org unit. This allows
for typing of the start of the name without having to deal with the org
unit shortname "eating" the start of the label (and thus type-in), but
preserves the information the org unit provides.
As an example, instead of having to type:
CONS : St
To get close to the default "Stacks" in a long list you could just type
St
And likely get to, or close to, Stacks.
The option can be toggled from the Workstation Administration menu.
Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Conflicts:
Dan Scott [Fri, 23 Dec 2011 06:56:02 +0000 (01:56 -0500)]
TPAC: Display monograph parts
In search results and record details, display monograph parts if
associated with a copy. Uses unapi for search results and json_query for
record details. Only generates the "Part" column in the copy table if
that record actually has a monograph part; otherwise the column is not
generated.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Bill Erickson [Thu, 22 Dec 2011 15:13:03 +0000 (10:13 -0500)]
SVF in bib record summary: extract attrs on the server
This repairs a FIXME within the custom bib overlay code related to
parsing metabib.record_attr stores within the JS. Instead, now we use
an attr parsing utility function which compiles a regular hash so the
client no longer needs to parse it.
Signed-off-by: Bill Erickson <berick@esilibrary.com>
And then add something like this to server/skin/custom.js:
try {
netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
var prefs = Components.classes['@mozilla.org/preferences-service;1'].getService(Components.interfaces['nsIPrefBranch']);
} catch(E) {
dump('Error in custom.js trying to set oils.bib_brief.*.dynamic_grid_replacement.data: ' + E + '\n');
}
Finally, re-ingest any records with tag 915d (you can simply edit the MARC via
the MARC Editor for a specific record, or if the ingest.reingest.force_on_same_marc
row in config.internal_flag is enabled and you're not doing this during library
hours, you can re-ingest all records with UPDATE biblio.record_entry SET marc = marc;)
Signed-off-by: Jason Etheridge <jason@esilibrary.com> Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Tue, 29 Nov 2011 21:54:52 +0000 (16:54 -0500)]
TPac; indicate search results previously checked out
When a user is logged in to the tpac and performs a search, indicate in
the results set when any of the result items were ever checked out by
the logged in user.
Items will only be tagged when the related org setting is enabled and
the user has opted-in to circ history tracking.
New org unit setting is "opac.search.tag_circulated_items" /
"Tag Circulated Items in Results"
In the search results, just below title/author/callnumber/copy-count, a
new line is displayed that says "I have checked out this item before"
with a purdy little checkmark.
Bill Erickson [Mon, 19 Dec 2011 17:57:08 +0000 (12:57 -0500)]
TPAC: Change title tooltip in results table to useful message
From dbs's original commit:
The tooltip that would display when hovering over the title of a result
in the results table was simply the URI-escaped version of the title
text - not particularly helpful. Change this to say "Display record
details" as an actual hint about what action will occur when the user
clicks on a title in the results list.
This modified commit changes the title to 'Display record details for
"<title>"'
This commit also introduces the HTML plugin as a new
loaded-by-default template plugin. Among other things, it's useful for
ensuring HTML attributes are safely encoded, moresoe than |html, which
does not escape quotes.
https://bugs.launchpad.net/evergreen/+bug/902979
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Dan Scott <dan@coffeecode.net>
Dan Scott [Wed, 21 Dec 2011 17:58:46 +0000 (12:58 -0500)]
TPAC: Split result copy counts into a separate template
As Thomas Berezansky suggests, sites are likely to want to customize the
display of copy counts depending on whether they're consortial sharers,
how deep they want to display, whether they want to just show the
matching search scope... make it easy to customize by moving the
copy counts portion of the results table into a separate template.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Dan Scott [Wed, 21 Dec 2011 06:06:06 +0000 (01:06 -0500)]
TPAC: Improve display of holds/copy counts on record details
Based on some suggestions from Thomas Berezansky in LP 906168:
* Change the "Copies" header to "Available copies"
* Simplify the copy language to "# copies at <library>" (we still need
the noun "copies" but "available" has been factored out)
* Create a "Holds" header and move the holds information under that
* Put the "Available copies" and "Holds" into inline-block elements
so that they can take less vertical space on a wide screen but
will wrap on a narrow screen.
* Fix the line spacing between LI elements
In addition, break up the lengthy summary TT2 file into a few smaller
parts. In particular, make a copy_counts.tt2 file as sites are very
likely to customize this to, in some cases, not show the consortial
counts, or in other cases to only show the consortial count and current
search library.
Also fix some horrible CSS issues in the header in which the "Place
hold" and "Add to list" buttons were above the title / image, as well as
remove some of the CSS manipulation to plain H2 elements that gave them
no top margin.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Dan Scott [Mon, 19 Dec 2011 04:54:15 +0000 (23:54 -0500)]
TPAC: Display additional levels of copy counts
In line with the MassLNC TPAC suggestion, display the copy counts for
search results and record details not only at the consortial level, but
also at up to two additional levels of the org unit hierarchy (but no
deeper than the user has chosen to search).
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Bill Erickson [Thu, 6 Oct 2011 18:34:03 +0000 (14:34 -0400)]
TPac: holds placement on monographic parts
Ability to place holds on monographic parts. In the holds placement
form, if a record has parts, a parts selector will display in the form
allowing the user to optionally specificy a monographic part for the
hold.
If a record has no non-part copies, the user is required to select a
part, because, in such cases, the hold cannot be fulfilled without
selecting a part.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Bill Erickson [Tue, 8 Nov 2011 15:56:14 +0000 (10:56 -0500)]
bookbag CSV gets bib attrs; A/T unapi method
* Added a bib record unapi retrieval utility method for action/trigger
templates.
* Updated the bookbag CSV template to include data for the "item_type"
record attribute both to have it and as an example of how the unapi
retrieval works.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
Dan Scott [Tue, 20 Dec 2011 21:19:08 +0000 (16:19 -0500)]
Add "Last circulation date" field to new rcl view
Some libraries will want the option of filtering out copies which have
truly never circulated, so offering up the bare "last circulation date"
field rather than coalescing it with "create date" will give report
writers the ability to use an IS NOT NULL clause.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Dan Scott [Tue, 20 Dec 2011 16:33:33 +0000 (11:33 -0500)]
Escape the backslash to avoid warning in PostgreSQL 9.0-
In PostgreSQL 9.1, "standard_conforming_strings" is ON by default and
there's no warning - but previous versions of PostgreSQL will see the
backslash and throw a warning about how you haven't escaped the
backslash. Thanks to Thomas Berezansky for noticing.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Dan Scott [Fri, 9 Dec 2011 17:38:55 +0000 (12:38 -0500)]
Add concerto.sql dataset with callnums, copies, and URIs
Useful for testing a fresh Evergreen database, the concerto.sql dataset
is an SQL file that adds 100 bib records and automatically generates
assorted call numbers and copies for 3 of the branches. 50 of the
records include unadorned 856 fields and 25 of them have located URIs
(25 scoped at SYS1, and 10 scoped at both SYS1 and BR3).
In the effort to make the one-shot load of sample bib / copy / call
number data broad and realistic, delete some of the entities, add
prefixes and suffixes to some of the call numbers, and include some
monograph parts and conjoined items.
Signed-off-by: Dan Scott <dan@coffeecode.net> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Dan Scott [Tue, 20 Dec 2011 16:42:17 +0000 (11:42 -0500)]
Remove top-level templates_custom directory
This top-level directory and version of advanced.tt2 slipped into commit c9cdea869b5 and was noticed by Bill Erickson. It should not be here.
Send it into oblivion.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Bill Erickson <berick@esilibrary.com>
Dan Scott [Mon, 19 Dec 2011 17:55:10 +0000 (12:55 -0500)]
Add a .gitignore file suitable for master
"git status" is painful in a source directory in which you're built and
installed Evergreen. This commit adds a .gitignore file that masks most
of the files and directories that you don't want to even think about, in
the hopes that the default Evergreen development experience can be mo'
betta.
Variations on this could be backported to rel_2_1 and rel_2_0 but take
care as some of the files that used to be source files in older releases
are now build from *.in files via autoconf.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Dan Scott [Mon, 19 Dec 2011 16:17:12 +0000 (11:17 -0500)]
Wrap upgrade script for CREATE_REPORT_TEMPLATE permission
Permissions to create report templates will automatically be added to
any group that currently has the ability to run reports as part of the
upgrade process; if you want to make use of the ability to prevent some
groups from creating ad-hoc reports, remove the CREATE_REPORT_TEMPLATE
permission from permission.grp_perm_map for that group.
Dan Scott [Tue, 22 Nov 2011 16:55:45 +0000 (11:55 -0500)]
Avoid updating deleted call numbers for 2.0 -> 2.1 upgrade
25% of the call numbers on our production system are deleted, so
filtering out the deleted call numbers from the update in the 2.0 -> 2.1
upgrade saves a significant amount of time.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Bill Erickson <berick@esilibrary.com>
James Fournie [Sun, 11 Dec 2011 00:49:01 +0000 (16:49 -0800)]
Fix Dewey call number sorting
Ported over Koha commit aef8358c - fix for Koha Bug 4265.
Further documented in Evergreen LP # 902667
Here's the description from the commit message by Magnus Enger:
C4::ClassSortRoutine::Dewey turns "306 Les" into "306_Les"
for items.cn_sort and MARC-field 952$6, which results in
"306.46 Les" being sorted before "306 Les" in the OPAC.
With this patch, "306 Les" is turned into "306_000000000000000_Les".
Signed-off-by: James Fournie <jfournie@sitka.bclibraries.ca> Signed-off-by: Dan Scott <dscott@laurentian.ca>
I lied when I said it includes Data::Dumper, so you don't have to.
It does include Data::Dumper, but if you want to use Data::Dumper
in your script, you still have to use Data::Dumper.
Signed-off-by: Jason Stephenson <jstephenson@mvlc.org> Signed-off-by: Bill Erickson <berick@esilibrary.com>
Dan Scott [Sat, 10 Dec 2011 15:43:47 +0000 (10:43 -0500)]
TPAC: Assume that templates are encoded in UTF-8
Per http://template-toolkit.org/docs/faq/index.html
under "Why do I get rubbish for my utf-8 templates?", Template::Toolkit
does not assume that templates are encoded in UTF-8, which runs counter
to current assumptions circa 2011.
Practically, this means that before this change any UTF8 characters
used for purposes such as Unicode art or otherwise would be garbled in
the generated Web page. This commit tells Template::Toolkit to assume
that the templates are UTF8 without forcing us to monkey with byte-order
markers.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Bill Erickson <berick@esilibrary.com>
bott [Wed, 14 Dec 2011 17:31:30 +0000 (12:31 -0500)]
Allow for the page offset when listing the "Result x of y" values.
The record details page did not show the page offset correctly, so
result 13 would show up as "Result 3 of ###", and result 23 would also
show up as "Result 3 of ###".
Signed-off-by: bott <bott@grpl.org> Signed-off-by: Dan Scott <dscott@laurentian.ca>
Bibs aren't required to have sources. Thus, adjust all appropriate locations
to support a default state of "no source bibs can have copies", without
erroring out.
Signed-off-by: Thomas Berezansky <tsbere@mvlc.org> Signed-off-by: Dan Scott <dscott@laurentian.ca>
Bill Erickson [Wed, 14 Dec 2011 18:36:05 +0000 (13:36 -0500)]
Process still-shelved, canceled holds in clear-shelf process
Holds that are canceled but still physically on the hold shelf are
processed like other holds during the clear-shelf process. They will be
grouped in the same manner and if a custom post-clear status is
configured, copies linked to already-canceled holds will get the custom
status. The only difference is already-canceled holds will not be
re-canceled during the clear-shelf process.
This change has the added benefit of leveraging another API call to
retrieve the shelf-expired holds instead of using its own custom
json-query.
See https://bugs.launchpad.net/evergreen/+bug/904332
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Dan Scott [Tue, 6 Dec 2011 07:16:16 +0000 (02:16 -0500)]
TPAC: Add prefixes and suffixes to call number displays
Call numbers can be associated with prefixes and suffixes meant for
display purposes; display these with the call numbers in search results
and record details.
Thanks to Lebbeous and Bill for the assist in sorting out the remaining
portion of the hairy json_query for the record display.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
Bill Erickson [Fri, 9 Dec 2011 20:52:32 +0000 (15:52 -0500)]
Alert addresses for patron registration : UI
Add support for comparing user addresses to alert addresses. When an
address is found, the address in question is styled (the header row
turns red) and the configured alert message is shown along the
top-right, where other warnings appear.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Thomas Berezansky <tsbere@mvlc.org>
projects / working / Evergreen.git / log