2 * App to drive the offline UI
7 angular.module('egOffline', ['ngRoute', 'ui.bootstrap', 'egCoreMod', 'egUiMod', 'ngToast', 'tableSort'])
10 ['$routeProvider','$locationProvider','$compileProvider',
11 function($routeProvider , $locationProvider , $compileProvider) {
13 $locationProvider.html5Mode(true);
14 $compileProvider.aHrefSanitizationWhitelist(/^\s*(https?|mailto|blob):/);
17 * Route resolvers allow us to run async commands
18 * before the page controller is instantiated.
20 var resolver = {delay : ['egCore', 'egLovefield',
21 function(egCore, egLovefield) {
22 // the 'offline' schema is only active in the offline UI.
23 egLovefield.activeSchemas.push('offline');
24 return egCore.startup.go();
28 $routeProvider.when('/offline-interface/:tab', {
29 templateUrl: 'offline-template',
30 controller: 'OfflineCtrl',
35 $routeProvider.otherwise({
36 templateUrl : 'offline-template',
37 controller : 'OfflineCtrl',
42 .controller('OfflineSessionCtrl',
43 ['$scope','$window','egCore','$routeParams','$http','$q','$timeout','egPromptDialog','ngToast','egProgressDialog',
44 function($scope , $window , egCore , $routeParams , $http , $q , $timeout , egPromptDialog , ngToast , egProgressDialog) {
45 $scope.active_session_tab = 'pending';
47 $scope.lookupNoncatTypeName = function (type) {
48 var nc = $scope.noncats.filter(function(n){ return n.id() == type })[0];
49 if (nc) return nc.name();
53 $scope.createDate = function (ts, epoch) {
55 if (epoch) ts = ts * 1000;
59 $scope.setSession = function (s, ind) {
60 $scope.current_session = s;
61 $scope.current_session_index = ind;
63 return $scope.refreshExceptions(s);
66 $scope.createSession = function () {
68 return egPromptDialog.open(
69 egCore.strings.OFFLINE_SESSION_DESC, '',
70 {ok : function(value) {
73 return $http.get(formURL({action:'create',desc:value})).then(function(res) {
74 if (res.data.ilsevent == "0") return $q.when(res.data.payload);
76 }).then(function (seskey) {
77 return $scope.refreshSessions().then(function() {
79 var s = $scope.sessions.filter(function(s){ s.key == seskey })[0];
80 var ind = $scope.sessions.length - 1; // sorted by create time, so new one is last
81 return $scope.setSession(s, ind);
85 ngToast.warning(egCore.strings.OFFLINE_SESSION_CREATE_FAILED);
92 $scope.processSession = function (s, ind) {
93 return $scope.setSession(s, ind).then(function() {
94 egProgressDialog.open();
97 formURL({action:'execute',seskey:$scope.current_session.key})
98 ).then(function(res) {
99 if (res.data.ilsevent == "0") return $q.when(res.data.payload);
101 }).then(function () {
102 egProgressDialog.close();
103 return $scope.refreshSessions()
104 .then(function(){ return $scope.refreshExceptions(s) });
106 egProgressDialog.close();
107 return $scope.refreshSessions().then(function() {
108 ngToast.warning(egCore.strings.OFFLINE_SESSION_PROCESSING_FAILED);
114 $scope.refreshExceptions = function (s) {
118 status_type : 'exceptions',
121 ).then(function(res) {
122 if (res.data.ilsevent) {
123 $scope.current_session.exceptions = [];
125 $scope.current_session.exceptions = res.data;
131 $scope.sessions = [];
132 $scope.refreshSessions = function () {
134 return $http.get(formURL({action:'status',status_type:'sessions'})).then(function(res) {
135 if (angular.isArray(res.data)) {
136 $scope.sessions = res.data;
141 var creator_list = [$q.when()];
142 angular.forEach($scope.sessions, function (s) {
144 s.org = egCore.org.get(s.org).shortname();
145 creator_list.push(egCore.pcrud.retrieve('au',s.creator).then(function(u) {
146 s.creator = u.family_name();
148 angular.forEach(s.scripts, function(sc) {
153 return $q.all(creator_list);
157 $scope.reprintLast = function () {
158 egCore.print.reprintLast();
162 $scope.uploadPending = function (s, ind) {
163 return $scope.setSession(s, ind).then(function() {
165 egProgressDialog.open();
166 return $scope.createOfflineXactBlob().then(function(blob) {
168 var form = new FormData();
169 form.append("ses", egCore.auth.token());
170 form.append("org", $scope.org.id());
171 form.append("ws", $scope.current_workstation_name());
172 form.append("wc", 1);
173 form.append("action", "load");
174 form.append("seskey", $scope.current_session.key);
175 form.append("file", blob, "file");
178 '/cgi-bin/offline/offline.pl?' + new Date().getTime(),
181 transformRequest: angular.identity,
182 headers: {'Content-Type': undefined}
184 ).then(function(res) {
185 egProgressDialog.close();
186 if (res.data.ilsevent == "0") {
187 return $scope.clear_pending(true).then(function() {
188 return $scope.refreshSessions();
191 ngToast.warning(egCore.strings.OFFLINE_SESSION_UPLOAD_FAILED);
192 return $scope.refreshSessions();
194 },function () { egProgressDialog.close() });
199 $scope.retrieveDetails = function (x) {
200 alert(JSON.stringify(x, null, 2)); // egAlertDialog kills pretty printing
203 $scope.retrieveItem = function (bc) {
204 return egCore.pcrud.search('acp',{deleted: 'f', barcode: bc}).then(function(copy) {
207 egCore.env.basePath +
208 '/cat/item/' + copy.id(),
213 ngToast.warning(egCore.strings.ITEM_NOT_FOUND);
217 $scope.retrievePatron = function (bc) {
218 return egCore.pcrud.search('ac',{barcode: bc}).then(function(card) {
221 egCore.env.basePath +
222 '/circ/patron/' + card.usr() + '/checkout',
227 ngToast.warning(egCore.strings.PATRON_NOT_FOUND);
231 function formURL (params) {
232 var url = '/cgi-bin/offline/offline.pl?' + new Date().getTime();
235 org : $scope.org ? $scope.org.id() : null,
236 ws : $scope.current_workstation_name(),
238 ses : egCore.auth.token()
241 angular.extend(params, defaults)
244 for (var k in params) {
245 url += '&' + k + '=' + window.encodeURIComponent(params[k]);
250 $scope.$watch('org',function(n){if (n) $scope.refreshSessions()});
255 .controller('OfflineCtrl',
256 ['$q','$scope','$window','$location','$rootScope','egCore',
257 'egLovefield','$routeParams','$timeout','$http','ngToast',
258 'egConfirmDialog','egUnloadPrompt','egProgressDialog',
259 function($q , $scope , $window , $location , $rootScope , egCore ,
260 egLovefield , $routeParams , $timeout , $http , ngToast ,
261 egConfirmDialog , egUnloadPrompt, egProgressDialog) {
263 // Immediately redirect if we're really offline
264 if (!$window.navigator.onLine) {
265 if ($location.path().match(/session$/)) {
266 var path = $location.path();
267 console.log('internal redirect');
268 return $location.path(path.replace('session','checkout'));
272 var today = new Date();
276 today.setMilliseconds(0);
278 $scope.minDate = today;
279 $scope.blocked_patron = null;
280 $scope.bad_barcode = null;
281 $scope.barcode_type = 'barcode';
282 $scope.focusMe = true;
283 $scope.shared = { outOfRange : false, due_date : null, due_date_offset : '' };
284 $scope.workstation_obj = null;
285 $scope.workstation = '';
286 $scope.workstation_owner = '';
287 $scope.workstations = [];
289 $scope.do_print = Boolean($scope.active_tab == 'checkout');
290 $scope.do_print_changed = false;
291 $scope.printed = false;
293 $scope.imported_pending_xacts = { data : '' };
295 $scope.xact_page = { checkin:[], checkout:[], renew:[], in_house_use:[] };
296 $scope.all_xact = [];
299 $scope.checkout = { noncat_type : '' };
300 $scope.renew = { noncat_type : '' };
301 $scope.in_house_use = {count : 1};
302 $scope.checkin = { backdate : new Date() };
304 $scope.current_workstation_owning_lib = function () {
305 return $scope.workstations.filter(function(w) {
306 return $scope.workstation == w.id
310 $scope.current_workstation_name = function () {
311 return $scope.workstations.filter(function(w) {
312 return $scope.workstation == w.id
316 $scope.$watch('workstation', function (n,o) {
318 $scope.org = egCore.org.get($scope.current_workstation_owning_lib());
321 $scope.changeCheck = function () {
322 $scope.strict_barcode = !$scope.strict_barcode;
323 $scope.do_check_changed = true;
324 egCore.hatch.setItem('eg.offline.strict_barcode', $scope.strict_barcode)
327 $scope.changePrint = function () {
328 $scope.do_print = !$scope.do_print;
329 $scope.do_print_changed = true;
330 egCore.hatch.setItem('eg.offline.print_receipt', $scope.do_print)
333 $scope.logged_in = egCore.auth.token() ? true : false;
336 $scope.active_tab = $routeParams.tab;
338 if (!$scope.logged_in) {
339 $scope.active_tab = 'checkout';
341 $scope.active_tab = 'session';
345 egCore.hatch.getItem('eg.offline.print_receipt')
346 .then(function(setting) {
347 $scope.do_print = setting;
348 if (setting !== undefined) $scope.do_print_changed = true;
351 egCore.hatch.getItem('eg.offline.strict_barcode')
352 .then(function(setting) {
353 $scope.strict_barcode = setting;
354 if (setting !== undefined) $scope.do_check_changed = true;
357 egCore.hatch.getItem('eg.workstation.all')
358 .then(function(all) {
359 if (all && all.length) {
360 $scope.workstations = all;
362 if (ws = $location.search().ws) {
363 // user requested a workstation via URL
364 var match = all.filter(
365 function(w) {return ws == w.name} )[0];
368 // requested WS registered on this client
369 $scope.workstation_obj = match;
370 $scope.workstation = match.id;
371 $scope.workstation_owner = match.owning_lib;
373 // the requested WS is not registered on this client
374 $scope.wsNotRegistered = true;
377 // no workstation requested; use the default
378 egCore.hatch.getItem('eg.workstation.default')
380 var ws_obj = all.filter(function(w) {
384 $scope.workstation_obj = ws_obj;
385 $scope.workstation = ws_obj.id;
386 $scope.workstation_owner = ws_obj.owning_lib;
388 return egLovefield.reconstituteList('cnct').then(function () {
389 $scope.noncats = egCore.env.cnct.list;
396 $scope.downloadBlockList = function () {
397 egProgressDialog.open();
398 egLovefield.populateBlockList().then(
400 ngToast.create(egCore.strings.OFFLINE_BLOCKLIST_SUCCESS);
403 ngToast.warning(egCore.strings.OFFLINE_BLOCKLIST_FAIL);
404 egCore.audio.play('warning.offline.blocklist_fail');
406 )['finally'](egProgressDialog.close);
409 $scope.createOfflineXactBlob = function () {
410 return egLovefield.retrievePendingOfflineXacts().then(function(list) {
412 angular.forEach(list, function (i) {
413 flat_list.push(JSON.stringify(i) + '\n');
416 var blob = new Blob(flat_list, {type: 'text/plain'});
422 $scope.pending_xacts = [];
423 $scope.retrieve_pending = function () {
424 return egLovefield.retrievePendingOfflineXacts().then(function(list) {
425 $scope.pending_xacts = list;
426 return $q.when(list);
430 $scope.save = function () {
431 var promises = [$q.when()];
432 angular.forEach($scope.all_xact, function (x) {
433 promises.push(egLovefield.addOfflineXact(x));
436 var prints = [$q.when()];
437 if ($scope.do_print) {
438 angular.forEach(['checkin','checkout','renew','in_house_use'], function(xtype) {
439 if ($scope.xact_page[xtype].length > 0) {
440 prints.push(egCore.print.print({
442 template : 'offline_'+xtype,
444 transactions : $scope.xact_page[xtype]
451 return $q.all(promises.concat(prints)).finally(function() {
452 egUnloadPrompt.clear();
453 if (prints.length > 1) $scope.printed = true;
454 $scope.all_xact = [];
455 $scope.xact_page = { checkin:[], checkout:[], renew:[], in_house_use:[] };
456 angular.forEach(['checkout','renew'], function (xtype) {
457 $scope[xtype].patron_barcode = '';
459 $scope.retrieve_pending();
463 $rootScope.save_offline_xacts = function () { return $scope.save() };
464 $rootScope.active_tab = function (t) { $scope.active_tab = t };
466 $scope.logout = function () {
467 egCore.auth.logout();
468 $window.location.href = location.href;
471 $scope.clear_pending = function (skip_confirm) {
473 return egLovefield.destroyPendingOfflineXacts().then(function () {
474 return $scope.retrieve_pending();
477 return egConfirmDialog.open(
478 egCore.strings.CONFIRM_CLEAR_PENDING,
479 egCore.strings.CONFIRM_CLEAR_PENDING_BODY,
481 ).result.then(function() {
482 return egLovefield.destroyPendingOfflineXacts().then(function () {
483 return $scope.retrieve_pending();
489 $scope.retrieve_pending();
490 $scope.$watch('active_tab', function (n,o) {
491 console.log('watch caught change to active_tab: ' + o + ' -> ' + n);
492 if (n != o && !$scope.do_check_changed && n != 'checkout') $scope.strict_barcode = false;
493 if (n != o && !$scope.do_check_changed && n == 'checkout') $scope.strict_barcode = true;
494 if (n != o && !$scope.do_print_changed && n != 'checkout') $scope.do_print = false;
495 if (n != o && !$scope.do_print_changed && n == 'checkout') $scope.do_print = true;
496 if (n != o && n == 'session') $scope.retrieve_pending();
499 $scope.$watch('imported_pending_xacts.data', function (n, o) {
501 var lines = n.split('\n');
504 angular.forEach(lines, function (l) {
509 egLovefield.addOfflineXact(JSON.parse(l))
512 ngToast.warning(err);
516 $q.all(promises).then(function () { $scope.retrieve_pending() });
520 $scope.resetDueDate = function (xtype) {
521 $scope.shared.due_date = new Date();
522 $scope.shared.due_date.setDate($scope.shared.due_date.getDate() + parseInt($scope.shared.due_date_offset));
525 $scope.notEnough = function (xtype) {
527 if (xtype == 'checkout') {
528 if ($scope.shared.outOfRange) return true;
530 $scope.checkout.patron_barcode &&
531 ($scope.shared.due_date || $scope.shared.due_date_offset) &&
532 ($scope.checkout.barcode || ($scope.checkout.noncat_type && $scope.checkout.noncat_count))
537 if (xtype == 'renew') {
538 if ($scope.shared.outOfRange) return true;
540 $scope.renew.barcode &&
541 ($scope.shared.due_date || $scope.shared.due_date_offset)
546 if (xtype == 'in_house_use') {
548 $scope.in_house_use.barcode && $scope.in_house_use.count
553 if (xtype == 'checkin') {
555 $scope.checkin.barcode && $scope.checkin.backdate
561 $scope.clear = function (xtype) {
563 if (xtype=="in_house_use") $scope[xtype].count = 1;
566 $scope.add = function (xtype,next_focus) {
568 var barcode = $scope[xtype].barcode;
570 if ($scope.xact_page[xtype].filter(function(x){ return x.barcode == barcode }).length > 0) {
571 ngToast.warning(egCore.strings.DUPLICATE_BARCODE);
572 egCore.audio.play('warning.offline.duplicate_barcode');
573 $scope[xtype].barcode = '';
574 if (next_focus) $('#'+next_focus).focus();
579 var pbarcode = $scope[xtype].patron_barcode;
581 egLovefield.testOfflineBlock(pbarcode).then(function (blocked) {
583 egCore.audio.play('warning.offline.blocked_patron');
584 egConfirmDialog.open(
585 egCore.strings.PATRON_BLOCKED,
586 egCore.strings.PATRON_BLOCKED_WHY[blocked],
587 {}, egCore.strings.ALLOW, egCore.strings.REJECT
589 function(){ // forced
590 $scope.blocked_patron = null;
591 _add_impl(xtype,true)
592 if (next_focus) $('#'+next_focus).focus();
593 },function(){ // stopped
594 $scope.blocked_patron = xtype;
595 if (next_focus) $('#'+next_focus).focus();
600 $scope.blocked_patron = null;
601 _add_impl(xtype,true)
602 if (next_focus) $('#'+next_focus).focus();
607 if (next_focus) $('#'+next_focus).focus();
611 function _add_impl (xtype,digest) {
612 var pbarcode = $scope[xtype].patron_barcode;
613 var backdate = $scope[xtype].backdate;
615 if ($scope.strict_barcode && pbarcode) {
616 if (!check_barcode(pbarcode)) {
617 $scope.bad_barcode = xtype;
618 egCore.audio.play('warning.offline.bad_barcode');
619 return egConfirmDialog.open(
620 egCore.strings.BAD_PATRON_BARCODE,
621 egCore.strings.BAD_PATRON_BARCODE_CD,
622 {}, egCore.strings.ALLOW, egCore.strings.REJECT
624 function(){ // forced
625 $scope.blocked_patron = null;
626 return _add_impl2(xtype,digest)
627 },function(){ // stopped
628 $scope.blocked_patron = xtype;
634 if ($scope.strict_barcode && $scope[xtype].barcode) {
635 if (!check_barcode($scope[xtype].barcode)) {
636 $scope.bad_barcode = xtype;
637 egCore.audio.play('warning.offline.bad_barcode');
638 return egConfirmDialog.open(
639 egCore.strings.BAD_BARCODE,
640 egCore.strings.BAD_BARCODE_CD,
641 {}, egCore.strings.ALLOW, egCore.strings.REJECT
643 function(){ // forced
644 $scope.blocked_patron = null;
645 return _add_impl2(xtype,digest)
646 },function(){ // stopped
647 $scope.blocked_patron = xtype;
653 return _add_impl2(xtype,digest);
656 function _add_impl2 (xtype,digest) {
657 var pbarcode = $scope[xtype].patron_barcode;
658 var backdate = $scope[xtype].backdate;
660 $scope.bad_barcode = null;
662 var now = new Date().getTime();
665 if ($scope[xtype].noncat_type) $scope[xtype].noncat = 1;
667 if ($scope.shared.due_date && (xtype == 'checkout' || xtype == 'renew')) {
668 $scope[xtype].due_date = $scope.shared.due_date.toISOString();
669 $scope[xtype].checkout_time = new Date().toISOString();
672 var xact = { timestamp : parseInt(now), type : xtype, delta : 0 };
674 $scope.xact_page[xtype].push(
675 angular.extend(xact, $scope[xtype])
678 $scope.all_xact.push(xact)
679 egUnloadPrompt.attach($rootScope);
683 if (pbarcode) $scope[xtype].patron_barcode = pbarcode;
684 if (backdate) $scope[xtype].backdate = backdate;
685 if (xtype=="in_house_use") $scope[xtype].count = 1;
687 if (digest) $timeout(function(){$scope.$apply()});
690 check_barcode = function(bc) {
691 if (bc != Number(bc)) return false;
693 // "16.00" == Number("16.00"), but the . is bad.
694 // Throw out any barcode that isn't just digits
695 if (bc.search(/\D/) != -1) return false;
696 var last_digit = bc.substr(bc.length-1);
697 var stripped_barcode = bc.substr(0,bc.length-1);
698 return barcode_checkdigit(stripped_barcode).toString() == last_digit;
701 barcode_checkdigit = function(bc) {
702 var reverse_barcode = bc.toString().split('').reverse();
703 var check_sum = 0; var multiplier = 2;
704 for (var i = 0; i < reverse_barcode.length; i++) {
705 var digit = reverse_barcode[i];
706 var product = digit * multiplier; product = product.toString();
708 for (var j = 0; j < product.length; j++) {
709 temp_sum += Number( product[j] );
711 check_sum += Number( temp_sum );
712 multiplier = ( multiplier == 2 ? 1 : 2 );
714 check_sum = check_sum.toString();
715 var next_multiple_of_10 = (check_sum.match(/(\d*)\d$/)[1] * 10) + 10;
716 var check_digit = next_multiple_of_10 - Number(check_sum);
717 if (check_digit == 10) check_digit = 0;
721 function fetch_org_after_tree_exists () {
724 $scope.org = egCore.org.get($scope.current_workstation_owning_lib());
726 fetch_org_after_tree_exists();
731 fetch_org_after_tree_exists();
735 // dummy service so standalone patron editor can reference it
736 .factory('patronSvc', function() { return { /* dummy */ } })
738 .factory('patronRegSvc', ['$q', 'egCore', 'egLovefield', function($q, egCore, egLovefield) {
740 egLovefield.isOffline = true;
743 org : null, // will come from workstation org
744 field_doc : {}, // config.idl_field_doc
745 profiles : [], // permission groups
746 edit_profiles : [], // perm groups we can modify
748 user_settings : {}, // applied user settings
749 user_setting_types : {}, // config.usr_setting_type
750 opt_in_setting_types : {}, // config.usr_setting_type for event-def opt-in
752 survey_questions : {},
754 survey_responses : {}, // survey.responses for loaded patron in progress
756 stat_cat_entry_maps : {}, // cat.id to selected value
757 virt_id : -1, // virtual ID for new objects
758 init_done : false // have we loaded our initialization data?
761 service.offlineMode = function () {
765 // launch a series of parallel data retrieval calls
766 service.init = function(scope) {
768 // Data loaded here only needs to be retrieved the first time this
769 // tab becomes active within the current instance of the patron app.
770 // In other words, navigating between patron tabs will not cause
771 // all of this data to be reloaded. Navigating to a separate app
772 // and returning will cause the data to be reloaded.
773 if (service.init_done) return $q.when();
774 service.init_done = true;
777 service.get_field_doc(),
778 service.get_perm_groups(),
779 service.get_ident_types(),
780 service.get_user_settings(),
781 service.get_org_settings(),
782 service.get_stat_cats(),
783 service.get_surveys(),
784 service.get_net_access_levels()
788 service.get_linked_addr_users = function(addrs) {
792 service.apply_secondary_groups = function(user_id, group_ids) {
793 return $q.when(true);
796 // See note above about not loading egUser.
798 service.format_name = function(last, first, middle) {
799 return last + ', ' + first + (middle ? ' ' + middle : '');
802 service.check_dupe_username = function(usrname) {
803 return $q.when(false);
806 // determine which user groups our user is not allowed to modify
807 service.set_edit_profiles = function() {
808 service.edit_profiles = egCore.env.pgt.list.filter(
809 function (p) { return p.application_perm() == 'group_application.user.patron' }
814 // resolves to a hash of perm-name => boolean value indicating
815 // wether the user has the permission at org_id.
816 service.has_perms_for_org = function(org_id) {
821 'CREATE_USER_GROUP_LINK',
822 'UPDATE_PATRON_COLLECTIONS_EXEMPT',
823 'UPDATE_PATRON_CLAIM_RETURN_COUNT',
824 'UPDATE_PATRON_CLAIM_NEVER_CHECKED_OUT_COUNT',
825 'UPDATE_PATRON_ACTIVE_CARD',
826 'UPDATE_PATRON_PRIMARY_CARD'
830 angular.forEach(perms_needed, function (p) {
834 return $q.when(hash);
837 service.get_surveys = function() {
838 return egLovefield.reconstituteList('asv').then(function(offline) {
839 return egLovefield.reconstituteList('asvq')
841 return egLovefield.reconstituteList('asva');
843 angular.forEach(egCore.env.asv.list, function (s) {
844 s.questions( egCore.env.asvq.list.filter( function (q) {
845 return q.survey().id == s.id();
849 angular.forEach(egCore.env.asvq.list, function (q) {
850 q.survey( egCore.env.asv.map[ q.survey().id ] );
851 q.answers( egCore.env.asva.list.filter( function (a) {
852 return q.id() == a.question();
856 angular.forEach(egCore.env.asva.list, function (a) {
857 a.question( egCore.env.asvq.map[ a.question().id ] );
860 service.surveys = egCore.env.asv.list;
861 service.survey_questions = egCore.env.asvq.list;
862 service.survey_answers = egCore.env.asva.list;
869 service.get_stat_cats = function() {
870 return egLovefield.getStatCatsCache().then(
872 service.stat_cats = cats;
878 service.get_org_settings = function() {
879 return egLovefield.getSettingsCache().then(
882 angular.forEach(list, function (s) {
883 hash[s.name] = s.value;
885 service.org_settings = hash;
886 if (egCore && egCore.env && !egCore.env.aous) {
887 egCore.env.aous = hash;
888 console.log('setting egCore.env.aous');
895 service.get_ident_types = function() {
896 return egLovefield.reconstituteList('cit').then(function() {
897 service.ident_types = egCore.env.cit.list;
902 service.get_net_access_levels = function() {
903 return egLovefield.reconstituteList('cnal').then(function() {
904 service.net_access_levels = egCore.env.cnal.list;
909 service.get_perm_groups = function() {
910 if (egCore.env.pgt) {
911 service.profiles = egCore.env.pgt.list;
912 return service.set_edit_profiles();
914 return egLovefield.reconstituteTree('pgt').then(function(offline) {
915 service.profiles = egCore.env.pgt.list;
916 return service.set_edit_profiles();
921 service.get_field_doc = function() {
922 return egLovefield.getListFromOfflineCache('fdoc').then(function (list) {
923 angular.forEach(list, function(doc) {
924 if (!service.field_doc[doc.fm_class()])
925 service.field_doc[doc.fm_class()] = {};
926 service.field_doc[doc.fm_class()][doc.field()] = doc;
932 service.get_user_settings = function() {
934 'circ.holds_behind_desk',
935 'circ.collections.exempt',
937 'opac.default_phone',
938 'opac.default_pickup_location',
939 'opac.default_sms_carrier',
940 'opac.default_sms_notify'];
942 angular.forEach(static_types, function (t) {
943 service.user_settings[t] = null;
946 return egLovefield.getListFromOfflineCache('cust').then(function (list) {
947 angular.forEach(list, function(stype) {
948 service.user_setting_types[stype.name()] = stype;
949 if (static_types.indexOf(stype.name()) == -1) {
950 service.opt_in_setting_types[stype.name()] = stype;
952 if (stype.reg_default() != undefined) {
953 service.user_settings[setting.name()] =
954 setting.reg_default();
961 service.invalidate_field = function(patron, field) {
965 service.dupe_patron_search = function(patron, type, value) {
966 return $q.when({ search : search, count : 0 });
969 service.init_patron = function(current) {
972 return service.init_new_patron();
974 service.patron = current;
975 return service.init_existing_patron(current)
978 service.ingest_address = function(patron, addr) {
979 addr.valid = addr.valid == 't';
980 addr.within_city_limits = addr.within_city_limits == 't';
981 addr._is_mailing = (patron.mailing_address &&
982 addr.id == patron.mailing_address.id);
983 addr._is_billing = (patron.billing_address &&
984 addr.id == patron.billing_address.id);
988 * Existing patron objects reqire some data munging before insertion
991 * 1. Turn everything into a hash
992 * 2. ... Except certain fields (selectors) whose widgets require objects
993 * 3. Bools must be Boolean, not t/f.
995 service.init_existing_patron = function(current) {
997 service.existing_patron = current;
999 var patron = egCore.idl.toHash(current);
1001 patron.home_ou = egCore.org.get(patron.home_ou.id);
1002 patron.expire_date = new Date(Date.parse(patron.expire_date));
1003 patron.dob = service.parse_dob(patron.dob);
1004 patron.profile = current.profile(); // pre-hash version
1005 patron.net_access_level = current.net_access_level();
1006 patron.ident_type = current.ident_type();
1007 patron.groups = current.groups(); // pre-hash
1010 ['juvenile', 'barred', 'active', 'master_account'],
1011 function(field) { patron[field] = patron[field] == 't'; }
1014 angular.forEach(patron.cards, function(card) {
1015 card.active = card.active == 't';
1016 if (card.id == patron.card.id) {
1018 card._primary = 'on';
1022 angular.forEach(patron.addresses,
1023 function(addr) { service.ingest_address(patron, addr) });
1025 service.get_linked_addr_users(patron.addresses);
1027 // Remove stat cat entries that link to out-of-scope stat
1028 // cats. With this, we avoid unnecessarily updating (or worse,
1029 // modifying) stat cat values that are not ours to modify.
1030 patron.stat_cat_entries = patron.stat_cat_entries.filter(
1033 // service.stat_cats only contains in-scope stat cats.
1034 service.stat_cats.filter(function(cat) {
1035 return (cat.id() == map.stat_cat.id) })[0]
1040 // toss entries for existing stat cat maps into our living
1041 // stat cat entry map, which is modified within the template.
1042 angular.forEach(patron.stat_cat_entries, function(map) {
1043 service.stat_cat_entry_maps[map.stat_cat.id] = map.stat_cat_entry;
1049 service.init_new_patron = function() {
1051 id : service.virt_id--,
1054 address_type : egCore.strings.REG_ADDR_TYPE,
1057 within_city_limits : false,
1058 country : service.org_settings['ui.patron.default_country'],
1062 id : service.virt_id--,
1068 var home_ou = egCore.org.get(service.org);
1076 stat_cat_entries : [],
1081 if (service.clone_user)
1082 service.copy_clone_data(user);
1084 if (service.stage_user)
1085 service.copy_stage_data(user);
1090 // dob is always YYYY-MM-DD
1091 // Dates of birth do not contain timezone info, which can lead to
1092 // inconcistent timezone handling, potentially representing
1093 // different points in time, depending on the implementation.
1094 // https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/parse
1095 // See "Differences in assumed time zone"
1096 // TODO: move this into egDate ?
1097 service.parse_dob = function(dob) {
1098 if (!dob) return null;
1099 var parts = dob.split('-');
1100 var d = new Date(); // always local time zone, yay.
1101 d.setFullYear(parts[0]);
1102 d.setMonth(parts[1] - 1);
1103 d.setDate(parts[2]);
1107 service.copy_stage_data = function(user) {
1108 var cuser = service.stage_user;
1110 // copy the data into our new user object
1112 for (var key in egCore.idl.classes.stgu.field_map) {
1113 if (egCore.idl.classes.au.field_map[key] &&
1114 !egCore.idl.classes.stgu.field_map[key].virtual) {
1115 if (cuser.user[key]() !== null)
1116 user[key] = cuser.user[key]();
1120 if (user.home_ou) user.home_ou = egCore.org.get(user.home_ou);
1121 if (user.profile) user.profile = egCore.env.pgt.map[user.profile];
1122 if (user.ident_type)
1123 user.ident_type = egCore.env.cit.map[user.ident_type];
1124 user.dob = service.parse_dob(user.dob);
1126 // Clear the usrname if it looks like a UUID
1127 if (user.usrname.replace(/-/g,'').match(/[0-9a-f]{32}/))
1130 // Don't use stub address if we have one from the staged user.
1131 if (cuser.mailing_addresses.length || cuser.billing_addresses.length)
1132 user.addresses = [];
1134 // is_mailing=false implies is_billing
1135 function addr_from_stage(stage_addr) {
1136 if (!stage_addr) return;
1137 var cls = stage_addr.classname;
1140 id : service.virt_id--,
1144 _is_mailing : cls == 'stgma',
1145 _is_billing : cls == 'stgba'
1148 user.mailing_address = addr;
1149 user.addresses.push(addr);
1151 for (var key in egCore.idl.classes[cls].field_map) {
1152 if (egCore.idl.classes.aua.field_map[key] &&
1153 !egCore.idl.classes[cls].field_map[key].virtual) {
1154 if (stage_addr[key]() !== null)
1155 addr[key] = stage_addr[key]();
1160 addr_from_stage(cuser.mailing_addresses[0]);
1161 addr_from_stage(cuser.billing_addresses[0]);
1163 if (user.addresses.length == 1) {
1164 // If there is only one address,
1165 // use it as both mailing and billing.
1166 var addr = user.addresses[0];
1167 addr._is_mailing = addr._is_billing = true;
1168 user.mailing_address = user.billing_address = addr;
1171 if (cuser.cards.length) {
1173 id : service.virt_id--,
1174 barcode : cuser.cards[0].barcode(),
1180 user.cards.push(user.card);
1181 if (user.usrname == '')
1182 user.usrname = card.barcode;
1185 angular.forEach(cuser.settings, function(setting) {
1186 service.user_settings[setting.setting()] = Boolean(setting.value());
1190 // copy select values from the cloned user to the new user.
1192 service.copy_clone_data = function(user) {
1193 var clone_user = service.clone_user;
1195 // flesh the home org locally
1196 user.home_ou = egCore.org.get(clone_user.home_ou());
1197 if (user.profile) user.profile = egCore.env.pgt.map[user.profile];
1199 if (!clone_user.billing_address() &&
1200 !clone_user.mailing_address())
1201 return; // no addresses to copy or link
1203 // if the cloned user has any addresses, we don't need
1204 // the stub address created in init_new_patron.
1205 user.addresses = [];
1207 var copy_addresses =
1208 service.org_settings['circ.patron_edit.clone.copy_address'];
1210 var clone_fields = [
1217 angular.forEach(clone_fields, function(field) {
1218 user[field] = clone_user[field]();
1221 if (copy_addresses) {
1222 var bill_addr, mail_addr;
1224 // copy the billing and mailing addresses into new addresses
1225 function clone_addr(addr) {
1226 var new_addr = egCore.idl.toHash(addr);
1227 new_addr.id = service.virt_id--;
1228 new_addr.usr = user.id;
1229 new_addr.isnew = true;
1230 new_addr.valid = true;
1231 user.addresses.push(new_addr);
1235 if (bill_addr = clone_user.billing_address()) {
1236 var addr = clone_addr(bill_addr);
1237 addr._is_billing = true;
1238 user.billing_address = addr;
1241 if (mail_addr = clone_user.mailing_address()) {
1243 if (bill_addr && bill_addr.id() == mail_addr.id()) {
1244 user.mailing_address = user.billing_address;
1245 user.mailing_address._is_mailing = true;
1247 var addr = clone_addr(mail_addr);
1248 addr._is_mailing = true;
1249 user.mailing_address = addr;
1253 // if there is no billing addr, use the mailing addr
1254 user.billing_address = user.mailing_address;
1255 user.billing_address._is_billing = true;
1262 // link the billing and mailing addresses
1264 if (addr = clone_user.billing_address()) {
1265 user.billing_address = egCore.idl.toHash(addr);
1266 user.billing_address._is_billing = true;
1267 user.addresses.push(user.billing_address);
1268 user.billing_address._linked_owner_id = clone_user.id();
1269 user.billing_address._linked_owner = service.format_name(
1270 clone_user.family_name(),
1271 clone_user.first_given_name(),
1272 clone_user.second_given_name()
1276 if (addr = clone_user.mailing_address()) {
1277 if (user.billing_address &&
1278 addr.id() == user.billing_address.id) {
1279 // mailing matches billing
1280 user.mailing_address = user.billing_address;
1281 user.mailing_address._is_mailing = true;
1283 user.mailing_address = egCore.idl.toHash(addr);
1284 user.mailing_address._is_mailing = true;
1285 user.addresses.push(user.mailing_address);
1286 user.mailing_address._linked_owner_id = clone_user.id();
1287 user.mailing_address._linked_owner = service.format_name(
1288 clone_user.family_name(),
1289 clone_user.first_given_name(),
1290 clone_user.second_given_name()
1297 // translate the patron back into IDL form
1298 service.save_user = function(phash) {
1300 var patron = egCore.idl.fromHash('au', phash);
1302 patron.home_ou(patron.home_ou().id());
1303 patron.expire_date(patron.expire_date().toISOString());
1304 patron.profile(patron.profile().id());
1306 patron.dob(patron.dob().toISOString().replace(/T.*/,''));
1307 if (patron.ident_type())
1308 patron.ident_type(patron.ident_type().id());
1309 if (patron.net_access_level())
1310 patron.net_access_level(patron.net_access_level().id());
1313 ['juvenile', 'barred', 'active', 'master_account'],
1314 function(field) { patron[field](phash[field] ? 't' : 'f'); }
1317 var card_hashes = patron.cards();
1319 angular.forEach(card_hashes, function(chash) {
1320 var card = egCore.idl.fromHash('ac', chash)
1321 card.usr(patron.id());
1322 card.active(chash.active ? 't' : 'f');
1323 patron.cards().push(card);
1324 if (chash._primary) {
1329 var addr_hashes = patron.addresses();
1330 patron.addresses([]);
1331 angular.forEach(addr_hashes, function(addr_hash) {
1332 if (!addr_hash.isnew && !addr_hash.isdeleted)
1333 addr_hash.ischanged = true;
1334 var addr = egCore.idl.fromHash('aua', addr_hash);
1335 patron.addresses().push(addr);
1336 addr.valid(addr.valid() ? 't' : 'f');
1337 addr.within_city_limits(addr.within_city_limits() ? 't' : 'f');
1338 if (addr_hash._is_mailing) patron.mailing_address(addr);
1339 if (addr_hash._is_billing) patron.billing_address(addr);
1342 patron.survey_responses([]);
1343 angular.forEach(service.survey_responses, function(answer) {
1344 var question = service.survey_questions[answer.question()];
1345 var resp = new egCore.idl.asvr();
1347 resp.survey(question.survey());
1348 resp.question(question.id());
1349 resp.answer(answer.id());
1350 resp.usr(patron.id());
1351 resp.answer_date('now');
1352 patron.survey_responses().push(resp);
1355 // re-object-ify the patron stat cat entry maps
1357 angular.forEach(patron.stat_cat_entries(), function(entry) {
1358 var e = egCore.idl.fromHash('actscecm', entry);
1359 e.stat_cat(e.stat_cat().id);
1362 patron.stat_cat_entries(maps);
1364 // service.stat_cat_entry_maps maps stats to values
1365 // patron.stat_cat_entries is an array of stat_cat_entry_usr_map's
1367 service.stat_cat_entry_maps, function(value, cat_id) {
1369 // see if we already have a mapping for this entry
1370 var existing = patron.stat_cat_entries().filter(
1371 function(e) { return e.stat_cat() == cat_id })[0];
1373 if (existing) { // we have a mapping
1374 // if the existing mapping matches the new one,
1375 // there' nothing left to do
1376 if (existing.stat_cat_entry() == value) return;
1378 // mappings differ. delete the old one and create
1380 existing.isdeleted(true);
1383 var newmap = new egCore.idl.actscecm();
1384 newmap.target_usr(patron.id());
1386 newmap.stat_cat(cat_id);
1387 newmap.stat_cat_entry(value);
1388 patron.stat_cat_entries().push(newmap);
1391 if (!patron.isnew()) patron.ischanged(true);
1393 return egLovefield.addOfflineXact({
1394 user : egCore.idl.toHash(patron),
1395 timestamp : parseInt(new Date().getTime() / 1000),
1398 }).then(function (success) {
1399 if (success) return patron;
1403 service.remove_staged_user = function() {
1404 if (!service.stage_user) return $q.when();
1405 return egCore.net.request(
1407 'open-ils.actor.user.stage.delete',
1408 egCore.auth.token(),
1409 service.stage_user.user.row_id()
1413 service.save_user_settings = function(new_user, user_settings) {
1417 // Applies field-specific validation regex's from org settings
1418 // to form fields. Be careful not remove any pattern data we
1419 // are not explicitly over-writing in the provided patterns obj.
1420 service.set_field_patterns = function(patterns) {
1421 if (service.org_settings['opac.username_regex']) {
1422 patterns.au.usrname =
1423 new RegExp(service.org_settings['opac.username_regex']);
1426 if (service.org_settings['opac.barcode_regex']) {
1427 patterns.ac.barcode =
1428 new RegExp(service.org_settings['opac.barcode_regex']);
1431 if (service.org_settings['global.password_regex']) {
1432 patterns.au.passwd =
1433 new RegExp(service.org_settings['global.password_regex']);
1436 var phone_reg = service.org_settings['ui.patron.edit.phone.regex'];
1438 // apply generic phone regex first, replace below as needed.
1439 patterns.au.day_phone = new RegExp(phone_reg);
1440 patterns.au.evening_phone = new RegExp(phone_reg);
1441 patterns.au.other_phone = new RegExp(phone_reg);
1444 // the remaining patterns fit a well-known key name pattern
1446 angular.forEach(service.org_settings, function(val, key) {
1448 var parts = key.match(/ui.patron.edit\.(\w+)\.(\w+)\.regex/);
1451 var name = parts[2];
1452 patterns[cls][name] = new RegExp(val);
1459 .controller('PatronRegCtrl',
1460 ['$scope','$routeParams','$q','$uibModal','$window','egCore',
1461 'patronSvc','patronRegSvc','egUnloadPrompt','egAlertDialog',
1462 'egWorkLog','$timeout','egLovefield','$rootScope',
1463 function($scope , $routeParams , $q , $uibModal , $window , egCore ,
1464 patronSvc , patronRegSvc , egUnloadPrompt, egAlertDialog ,
1465 egWorkLog , $timeout , egLovefield , $rootScope) {
1467 $scope.rs = $rootScope;
1468 if ($scope.workstation_obj) patronRegSvc.org = $scope.workstation_obj.owning_lib;
1469 $scope.offline = true;
1471 $scope.page_data_loaded = false;
1472 $scope.clone_id = patronRegSvc.clone_id = $routeParams.clone_id;
1473 $scope.stage_username =
1474 patronRegSvc.stage_username = $routeParams.stage_username;
1476 patronRegSvc.patron_id = $routeParams.edit_id || $routeParams.id;
1478 // for existing patrons, disable barcode input by default
1479 $scope.disable_bc = $scope.focus_usrname = Boolean($scope.patron_id);
1480 $scope.focus_bc = !Boolean($scope.patron_id);
1481 $scope.address_alerts = [];
1482 $scope.dupe_counts = {};
1484 // map of perm name to true/false for perms the logged in user
1485 // has at the currently selected patron home org unit.
1488 $scope.edit_passthru = {};
1490 // 0=all, 1=suggested, 2=all
1491 $scope.edit_passthru.vis_level = 2;
1493 // Apply default values for new patrons during initial registration
1494 // prs is shorthand for patronSvc
1495 function set_new_patron_defaults(prs) {
1496 if (!$scope.patron.passwd) {
1497 // passsword may originate from staged user.
1498 $scope.generate_password();
1500 $scope.hold_notify_phone = true;
1501 $scope.hold_notify_email = true;
1503 // staged users may be loaded w/ a profile.
1504 $scope.set_expire_date();
1506 if (prs.org_settings['ui.patron.default_ident_type']) {
1507 // $scope.patron needs this field to be an object
1508 var id = prs.org_settings['ui.patron.default_ident_type'];
1509 var ident_type = $scope.ident_types.filter(
1510 function(type) { return type.id() == id })[0];
1511 $scope.patron.ident_type = ident_type;
1513 if (prs.org_settings['ui.patron.default_inet_access_level']) {
1514 // $scope.patron needs this field to be an object
1515 var id = prs.org_settings['ui.patron.default_inet_access_level'];
1516 var level = $scope.net_access_levels.filter(
1517 function(lvl) { return lvl.id() == id })[0];
1518 $scope.patron.net_access_level = level;
1520 if (prs.org_settings['ui.patron.default_country']) {
1521 $scope.patron.addresses[0].country =
1522 prs.org_settings['ui.patron.default_country'];
1526 // A null or undefined pattern leads to exceptions. Before the
1527 // patterns are loaded from the server, default all patterns
1528 // to an innocuous regex. To avoid re-creating numerous
1529 // RegExp objects, cache the stub RegExp after initial creation.
1530 // note: angular docs say ng-pattern accepts a regexp or string,
1531 // but as of writing, it only works with a regexp object.
1532 // (Likely an angular 1.2 vs. 1.4 issue).
1533 var field_patterns = {au : {}, ac : {}, aua : {}};
1534 $scope.field_pattern = function(cls, field) {
1535 if (!field_patterns[cls][field])
1536 field_patterns[cls][field] = new RegExp('.*');
1537 return field_patterns[cls][field];
1540 patronRegSvc.offlineMode($scope.offline); // force offline if ng-init'd to do so
1541 patronRegSvc.init().then(function() {
1542 // called after initTab and patronRegSvc.init have completed
1544 var prs = patronRegSvc; // brevity
1545 // in standalone mode, we have no patronSvc
1546 $scope.patron = prs.init_patron(patronSvc ? patronSvc.current : null);
1547 $scope.field_doc = prs.field_doc;
1548 $scope.edit_profiles = prs.edit_profiles;
1549 $scope.ident_types = prs.ident_types;
1550 $scope.net_access_levels = prs.net_access_levels;
1551 $scope.user_setting_types = prs.user_setting_types;
1552 $scope.opt_in_setting_types = prs.opt_in_setting_types;
1553 $scope.org_settings = prs.org_settings;
1554 $scope.sms_carriers = prs.sms_carriers;
1555 $scope.stat_cats = prs.stat_cats;
1556 $scope.surveys = prs.surveys;
1557 $scope.survey_responses = prs.survey_responses;
1558 $scope.stat_cat_entry_maps = prs.stat_cat_entry_maps;
1559 $scope.stage_user = prs.stage_user;
1560 $scope.stage_user_requestor = prs.stage_user_requestor;
1562 $scope.user_settings = prs.user_settings;
1563 // clone the user settings back into the patronRegSvc so
1564 // we have a copy of the original state of the settings.
1565 prs.user_settings = {};
1566 angular.forEach($scope.user_settings, function(val, key) {
1567 prs.user_settings[key] = val;
1570 extract_hold_notify();
1571 $scope.handle_home_org_changed();
1573 if ($scope.org_settings['ui.patron.edit.default_suggested'])
1574 $scope.edit_passthru.vis_level = 1;
1576 if ($scope.patron.isnew)
1577 set_new_patron_defaults(prs);
1579 $scope.page_data_loaded = true;
1581 prs.set_field_patterns(field_patterns);
1582 apply_username_regex();
1585 // update the currently displayed field documentation
1586 $scope.set_selected_field_doc = function(cls, field) {
1587 $scope.selected_field_doc = $scope.field_doc[cls][field];
1590 // returns the tree depth of the selected profile group tree node.
1591 $scope.pgt_depth = function(grp) {
1593 while (grp = egCore.env.pgt.map[grp.parent()]) d++;
1597 // IDL fields used for labels in the UI.
1598 $scope.idl_fields = {
1599 au : egCore.idl.classes.au.field_map,
1600 ac : egCore.idl.classes.ac.field_map,
1601 aua : egCore.idl.classes.aua.field_map
1604 // field visibility cache. Some fields are universally required.
1605 // 3 == value universally required
1606 // 2 == field is visible by default
1607 // 1 == field is suggested by default
1608 var field_visibility = {};
1609 var default_field_visibility = {
1613 'au.first_given_name' : 3,
1614 'au.family_name' : 3,
1615 'au.ident_type' : 3,
1618 'au.expire_date' : 3,
1619 'au.net_access_level' : 3,
1620 'aua.address_type' : 3,
1621 'aua.post_code' : 3,
1629 'aua.within_city_limits' : 2,
1634 // Returns true if the selected field should be visible
1635 // given the current required/suggested/all setting.
1636 // The visibility flag applied to each field as a result of calling
1637 // this function also sets (via the same flag) the requiredness state.
1638 $scope.show_field = function(field_key) {
1639 // org settings have not been received yet.
1640 if (!$scope.org_settings) return false;
1642 if (field_visibility[field_key] == undefined) {
1643 // compile and cache the visibility for the selected field
1645 var req_set = 'ui.patron.edit.' + field_key + '.require';
1646 var sho_set = 'ui.patron.edit.' + field_key + '.show';
1647 var sug_set = 'ui.patron.edit.' + field_key + '.suggest';
1649 if ($scope.org_settings[req_set]) {
1650 field_visibility[field_key] = 3;
1652 } else if ($scope.org_settings[sho_set]) {
1653 field_visibility[field_key] = 2;
1655 } else if ($scope.org_settings[sug_set]) {
1656 field_visibility[field_key] = 1;
1660 if (field_visibility[field_key] == undefined) {
1661 // No org settings were applied above. Use the default
1662 // settings if present or assume the field has no
1663 // visibility flags applied.
1664 field_visibility[field_key] =
1665 default_field_visibility[field_key] || 0;
1668 return field_visibility[field_key] >= $scope.edit_passthru.vis_level;
1671 // See $scope.show_field().
1672 // A field with visbility level 3 means it's required.
1673 $scope.field_required = function(cls, field) {
1675 // Value in the password field is not required
1676 // for existing patrons.
1677 if (field == 'passwd' && $scope.patron && !$scope.patron.isnew)
1680 return (field_visibility[cls + '.' + field] == 3 || default_field_visibility[cls + '.' + field] == 3);
1683 // generates a random 4-digit password
1684 $scope.generate_password = function() {
1685 $scope.patron.passwd = Math.floor(Math.random()*9000) + 1000;
1688 $scope.set_expire_date = function() {
1689 if (!$scope.patron.profile) return;
1690 var seconds = egCore.date.intervalToSeconds(
1691 $scope.patron.profile.perm_interval());
1692 var now_epoch = new Date().getTime();
1693 $scope.patron.expire_date = new Date(
1694 now_epoch + (seconds * 1000 /* milliseconds */))
1697 // grp is the pgt object
1698 $scope.set_profile = function(grp) {
1699 $scope.patron.profile = grp;
1700 $scope.set_expire_date();
1701 $scope.field_modified();
1704 $scope.invalid_profile = function() {
1707 $scope.patron.profile &&
1708 $scope.patron.profile.usergroup() == 't'
1712 $scope.new_address = function() {
1713 var addr = egCore.idl.toHash(new egCore.idl.aua());
1714 patronRegSvc.ingest_address($scope.patron, addr);
1715 addr.id = patronRegSvc.virt_id--;
1718 addr.within_city_limits = true;
1719 addr.country = $scope.org_settings['ui.patron.default_country'];
1720 $scope.patron.addresses.push(addr);
1723 // keep deleted addresses out of the patron object so
1724 // they won't appear in the UI. They'll be re-inserted
1725 // when the patron is updated.
1726 deleted_addresses = [];
1727 $scope.delete_address = function(id) {
1729 if ($scope.patron.isnew &&
1730 $scope.patron.addresses.length == 1 &&
1731 $scope.org_settings['ui.patron.registration.require_address']) {
1732 egAlertDialog.open(egCore.strings.REG_ADDR_REQUIRED);
1737 angular.forEach($scope.patron.addresses, function(addr) {
1738 if (addr.id == id) {
1740 addr.isdeleted = true;
1741 deleted_addresses.push(addr);
1744 addresses.push(addr);
1747 $scope.patron.addresses = addresses;
1750 $scope.post_code_changed = function(addr) {
1751 if ($scope.offline) return;
1753 'open-ils.search', 'open-ils.search.zip', addr.post_code)
1754 .then(function(resp) {
1756 if (resp.city) addr.city = resp.city;
1757 if (resp.state) addr.state = resp.state;
1758 if (resp.county) addr.county = resp.county;
1759 if (resp.alert) alert(resp.alert);
1763 $scope.replace_card = function() {
1764 $scope.patron.card.active = false;
1765 $scope.patron.card.ischanged = true;
1766 $scope.disable_bc = false;
1768 var new_card = egCore.idl.toHash(new egCore.idl.ac());
1769 new_card.id = patronRegSvc.virt_id--;
1770 new_card.isnew = true;
1771 new_card.active = true;
1772 new_card._primary = 'on';
1773 $scope.patron.card = new_card;
1774 $scope.patron.cards.push(new_card);
1777 $scope.day_phone_changed = function(phone) {
1778 if (phone && $scope.patron.isnew &&
1779 $scope.org_settings['patron.password.use_phone']) {
1780 $scope.patron.passwd = phone.substr(-4);
1784 $scope.barcode_changed = function(bc) {
1786 if (!$scope.patron.usrname)
1787 $scope.patron.usrname = bc;
1790 $scope.cards_dialog = function() {
1792 templateUrl: './circ/patron/t_patron_cards_dialog',
1795 ['$scope','$uibModalInstance','cards','perms',
1796 function($scope , $uibModalInstance , cards , perms) {
1797 // scope here is the modal-level scope
1798 $scope.args = {cards : cards};
1799 $scope.perms = perms;
1800 $scope.ok = function() { $uibModalInstance.close($scope.args) }
1801 $scope.cancel = function () { $uibModalInstance.dismiss() }
1804 cards : function() {
1805 // scope here is the controller-level scope
1806 return $scope.patron.cards;
1808 perms : function() {
1809 return $scope.perms;
1814 angular.forEach(args.cards, function(card) {
1815 card.ischanged = true; // assume cards need updating, OK?
1816 if (card._primary == 'on' &&
1817 card.id != $scope.patron.card.id) {
1818 $scope.patron.card = card;
1825 $scope.set_addr_type = function(addr, type) {
1826 var addrs = $scope.patron.addresses;
1827 if (addr['_is_'+type]) {
1828 angular.forEach(addrs, function(a) {
1829 if (a.id != addr.id) a['_is_'+type] = false;
1832 // unchecking mailing/billing means we have to randomly
1833 // select another address to fill that role. Select the
1834 // first address in the list (that does not match the
1836 for (var i = 0; i < addrs.length; i++) {
1837 if (addrs[i].id != addr.id) {
1838 addrs[i]['_is_' + type] = true;
1846 // Translate hold notify preferences from the form/scope back into a
1847 // single user setting value for opac.hold_notify.
1848 function compress_hold_notify() {
1849 var hold_notify = '';
1851 if ($scope.hold_notify_phone) {
1852 hold_notify = 'phone';
1855 if ($scope.hold_notify_email) {
1856 hold_notify = splitter + 'email';
1859 if ($scope.hold_notify_sms) {
1860 hold_notify = splitter + 'sms';
1863 $scope.user_settings['opac.hold_notify'] = hold_notify;
1866 // dialog for selecting additional permission groups
1867 $scope.secondary_groups_dialog = function() {
1869 templateUrl: './circ/patron/t_patron_groups_dialog',
1872 ['$scope','$uibModalInstance','linked_groups','pgt_depth',
1873 function($scope , $uibModalInstance , linked_groups , pgt_depth) {
1875 $scope.pgt_depth = pgt_depth;
1877 linked_groups : linked_groups,
1878 edit_profiles : patronRegSvc.edit_profiles,
1879 new_profile : patronRegSvc.edit_profiles[0]
1882 // add a new group to the linked groups list
1883 $scope.link_group = function($event, grp) {
1884 var found = false; // avoid duplicates
1885 angular.forEach($scope.args.linked_groups,
1886 function(g) {if (g.id() == grp.id()) found = true});
1887 if (!found) $scope.args.linked_groups.push(grp);
1888 $event.preventDefault(); // avoid close
1891 // remove a group from the linked groups list
1892 $scope.unlink_group = function($event, grp) {
1893 $scope.args.linked_groups =
1894 $scope.args.linked_groups.filter(function(g) {
1895 return g.id() != grp.id()
1897 $event.preventDefault(); // avoid close
1900 $scope.ok = function() { $uibModalInstance.close($scope.args) }
1901 $scope.cancel = function () { $uibModalInstance.dismiss() }
1904 linked_groups : function() { return $scope.patron.groups },
1905 pgt_depth : function() { return $scope.pgt_depth }
1910 if ($scope.patron.isnew) {
1911 // groups must be linked for new patrons after the
1912 // patron is created.
1913 $scope.patron.groups = args.linked_groups;
1917 // update links groups for existing users in real time.
1918 var ids = args.linked_groups.map(function(g) {return g.id()});
1919 patronRegSvc.apply_secondary_groups($scope.patron.id, ids)
1920 .then(function(success) {
1922 $scope.patron.groups = args.linked_groups;
1928 function extract_hold_notify() {
1929 notify = $scope.user_settings['opac.hold_notify'];
1930 if (!notify) return;
1931 $scope.hold_notify_phone = Boolean(notify.match(/phone/));
1932 $scope.hold_notify_email = Boolean(notify.match(/email/));
1933 $scope.hold_notify_sms = Boolean(notify.match(/sms/));
1936 $scope.invalidate_field = function(field) {
1937 patronRegSvc.invalidate_field($scope.patron, field);
1940 address_alert = function(addr) {
1941 if ($scope.offline) return;
1943 street1: addr.street1,
1944 street2: addr.street2,
1947 county: addr.county,
1948 country: addr.country,
1949 post_code: addr.post_code,
1950 mailing_address: addr._is_mailing,
1951 billing_address: addr._is_billing
1956 'open-ils.actor.address_alert.test',
1957 egCore.auth.token(), egCore.auth.user().ws_ou(), args
1958 ).then(function(res) {
1959 $scope.address_alerts = res;
1963 $scope.dupe_value_changed = function(type, value) {
1964 $scope.dupe_counts[type] = 0;
1965 patronRegSvc.dupe_patron_search($scope.patron, type, value)
1966 .then(function(res) {
1967 $scope.dupe_counts[type] = res.count;
1969 $scope.dupe_search_encoded =
1970 encodeURIComponent(js2JSON(res.search));
1972 $scope.dupe_search_encoded = '';
1977 // Dummy function in offline mode
1978 $scope.handle_home_org_changed = function() {}
1980 // This is called with every character typed in a form field,
1981 // since that's the only way to gaurantee something has changed.
1982 // See handle_field_changed for ng-change vs. ng-blur.
1983 $scope.field_modified = function() {
1984 // Call attach with every field change, regardless of whether
1985 // it's been called before. This will allow for re-attach after
1986 // the user clicks through the unload warning. egUnloadPrompt
1987 // will ensure we only attach once.
1988 egUnloadPrompt.attach($rootScope);
1991 // also monitor when form is changed *by the user*, as using
1992 // an ng-change handler doesn't work with eg-date-input
1993 $scope.$watch('reg_form.$pristine', function(newVal, oldVal) {
1994 if (!newVal) egUnloadPrompt.attach($rootScope);
1997 // username regex (if present) must be removed any time
1998 // the username matches the barcode to avoid firing the
1999 // invalid field handlers.
2000 function apply_username_regex() {
2001 var regex = $scope.org_settings['opac.username_regex'];
2003 if ($scope.patron.card.barcode) {
2004 // username must match the regex or the barcode
2005 field_patterns.au.usrname =
2007 regex + '|^' + $scope.patron.card.barcode + '$');
2009 // username must match the regex
2010 field_patterns.au.usrname = new RegExp(regex);
2013 // username can be any format.
2014 field_patterns.au.usrname = new RegExp('.*');
2018 // obj could be the patron, an address, etc.
2019 // This is called any time a form field achieves then loses focus.
2020 // It does not necessarily mean the field has changed.
2021 // The alternative is ng-change, but it's called with each character
2022 // typed, which would be overkill for many of the actions called here.
2023 $scope.handle_field_changed = function(obj, field_name) {
2026 var cls = obj.classname; // set by egIdl
2027 var value = obj[field_name];
2030 //console.log('changing field ' + field_name + ' to ' + value);
2032 switch (field_name) {
2034 if ($scope.patron.day_phone &&
2035 $scope.patron.isnew &&
2036 $scope.org_settings['patron.password.use_phone']) {
2037 $scope.patron.passwd = phone.substr(-4);
2042 apply_username_regex();
2043 $scope.barcode_changed(value);
2047 maintain_juvenile_flag();
2055 // patron.juvenile is set to true if the user was born after
2056 function maintain_juvenile_flag() {
2057 if ( !($scope.patron && $scope.patron.dob) ) return;
2060 $scope.org_settings['global.juvenile_age_threshold']
2063 var base = new Date();
2065 base.setTime(base.getTime() -
2066 Number(egCore.date.intervalToSeconds(juv_interval) + '000'));
2068 $scope.patron.juvenile = ($scope.patron.dob > base);
2071 // returns true (disable) for orgs that cannot have users.
2072 $scope.disable_home_org = function(org_id) {
2073 if (!org_id) return;
2074 var org = egCore.org.get(org_id);
2078 org.ou_type().can_have_users() == 'f'
2082 // Returns true if the Save and Save & Clone buttons should be disabled.
2083 $scope.edit_passthru.hide_save_actions = function() {
2087 // Returns true if any input elements are tagged as invalid
2088 // via Angular patterns or required attributes.
2089 function form_has_invalid_fields() {
2090 return $('#patron-reg-container .ng-invalid').length > 0;
2093 function form_is_incomplete() {
2095 $scope.dupe_username ||
2096 $scope.dupe_barcode ||
2097 form_has_invalid_fields()
2102 $scope.edit_passthru.save = function(save_args) {
2103 if (!save_args) save_args = {};
2105 if (form_is_incomplete()) {
2106 // User has not provided valid values for all required fields.
2107 return egAlertDialog.open(egCore.strings.REG_INVALID_FIELDS);
2110 // remove page unload warning prompt
2111 egUnloadPrompt.clear();
2113 // toss the deleted addresses back into the patron's list of
2114 // addresses so it's included in the update
2115 $scope.patron.addresses =
2116 $scope.patron.addresses.concat(deleted_addresses);
2118 compress_hold_notify();
2122 patronRegSvc.save_user($scope.patron)
2123 .then($scope.rs.save_offline_xacts)
2124 .then(function(new_user) {
2125 // reload the current page
2126 $window.location.href = location.href;