Docgen output would be a bit more useful if it respected the formatting
(such as it is) of the signature content provided by the developer. So,
let's make that happen.
Signed-off-by: Mike Rylander <mrylander@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Instead of simply producing an error message in the OpenSRF logs, calls
to nonexistent subroutines are now fatal errors which will stop code
execution.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bill Erickson [Fri, 12 Oct 2012 20:57:15 +0000 (16:57 -0400)]
LP#1066131: srfsh.py should not require opensrf.settings
Update srfsh.py to connect to the opensrf network without automatically
reading the opensrf.setting server data. This allows srfsh.py to run a
non-private network.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bill Erickson [Tue, 7 Jan 2014 19:06:06 +0000 (14:06 -0500)]
osrf_control router-de/re-register and reload commands
Added support for the following new command line options:
--router-de-register
--router-de-register-all
Sends a SIGUSR1 signal to the selected service(s), which causes each
service's listener process to send an "unregister" command to all
registered routers. The --all variant sends the signal to all
running listeners. The non-(--all) variant requires a --service.
--router-re-register
--router-re-register-all
Sends a SIGUSR2 signal to the selected service(s), which causes each
service's listener process to send a "register" command to all
configured routers routers. The --all variant sends the signal to
all running listeners. The non-(--all) variant requires a --service.
--reload
--reload-all
Sends a SIGHUP signal to the selected service(s). SIGHUP causes
each Listener process to reload its opensrf_core.xml config file
and gracefully re-launch drone processes. The -all variant sends
the signal to all services. The non-(-all) variant requires a
--service.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bill Erickson [Tue, 7 Jan 2014 19:06:06 +0000 (14:06 -0500)]
osrf_control router-de/re-register and reload commands
Added support for the following new command line options:
--router-de-register
--router-de-register-all
Sends a SIGUSR1 signal to the selected service(s), which causes each
service's listener process to send an "unregister" command to all
registered routers. The --all variant sends the signal to all
running listeners. The non-(--all) variant requires a --service.
--router-re-register
--router-re-register-all
Sends a SIGUSR2 signal to the selected service(s), which causes each
service's listener process to send a "register" command to all
configured routers routers. The --all variant sends the signal to
all running listeners. The non-(--all) variant requires a --service.
--reload
--reload-all
Sends a SIGHUP signal to the selected service(s). SIGHUP causes
each Listener process to reload its opensrf_core.xml config file
and gracefully re-launch drone processes. The -all variant sends
the signal to all services. The non-(-all) variant requires a
--service.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bill Erickson [Thu, 21 Nov 2013 21:37:38 +0000 (16:37 -0500)]
recover osrf_control router start
With the addition of service verification, which ensures that a service
is meant to run on the requested host, we lost the ability to start the
router by itself, since the router is never explicitly configured to run
anywhere. This patch assumes the router is always a valid service.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Dan Wells <dbw2@calvin.edu>
Bill Erickson [Thu, 21 Nov 2013 21:37:38 +0000 (16:37 -0500)]
recover osrf_control router start
With the addition of service verification, which ensures that a service
is meant to run on the requested host, we lost the ability to start the
router by itself, since the router is never explicitly configured to run
anywhere. This patch assumes the router is always a valid service.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Dan Wells <dbw2@calvin.edu>
Bill Erickson [Thu, 5 Dec 2013 17:27:44 +0000 (12:27 -0500)]
OpenSRF client disconnect robustification (Perl)
* Improve detection of client connection state with jabber server
Be more aggressive in testing and responding to failed connectivity.
It can happen in various ways, depending on what's happening to the
jabber server (death, delay, graceful shutdown). With these changes
we attempt to cover all the bases and detect as early as possible that
a connection has died, specifically when trying to create a new
connection after one has failed.
* Do a better job of cleaning up dead connections
Transport::PeerHandle now has a reset() action which disconnects (when
possible) and clears the global connection reference.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bill Erickson [Thu, 5 Dec 2013 17:27:44 +0000 (12:27 -0500)]
OpenSRF client disconnect robustification (Perl)
* Improve detection of client connection state with jabber server
Be more aggressive in testing and responding to failed connectivity.
It can happen in various ways, depending on what's happening to the
jabber server (death, delay, graceful shutdown). With these changes
we attempt to cover all the bases and detect as early as possible that
a connection has died, specifically when trying to create a new
connection after one has failed.
* Do a better job of cleaning up dead connections
Transport::PeerHandle now has a reset() action which disconnects (when
possible) and clears the global connection reference.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mike Rylander [Thu, 16 May 2013 14:17:15 +0000 (10:17 -0400)]
Protect subrequests from post-complete messages
Subrequests (AKA method_lookup()-based API calls) sometimes append
final-lvalue responses to the response list even after respond_complete()
has been called from within the implementation method. This commit
discards all post-respond_complete values, protecting against extra,
spurious values being returned to the ultimate client.
Signed-off-by: Mike Rylander <mrylander@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mike Rylander [Thu, 16 May 2013 14:17:15 +0000 (10:17 -0400)]
Protect subrequests from post-complete messages
Subrequests (AKA method_lookup()-based API calls) sometimes append
final-lvalue responses to the response list even after respond_complete()
has been called from within the implementation method. This commit
discards all post-respond_complete values, protecting against extra,
spurious values being returned to the ultimate client.
Signed-off-by: Mike Rylander <mrylander@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patch for bug 1204123 changes the client_recv()
to not set the transport_client error flag, as most
of the circumstances where it would have been set were
for cases where the call to select() was interrupted
by a signal, which is not an error per se.
This patch removes two tests that were therefore
made invalid, restoring the ability of the test suite
to pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Bill Erickson <berick@esilibrary.com>
Any time a start action is issued (start, start_all, restart,
restart_all), osrf_control will first verify that the selected hostname
(or localhost) hosts the requested service(s). If not, the user is
warned and the script exits before any action is taken.
Note: we do not make a similar verification for stop and signal actions,
since those may be reasonably be used even when a service is not
configured to run on the selected host.
Thanks to Jason Stephenson for the suggestion.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Bill Erickson [Tue, 27 Aug 2013 15:47:52 +0000 (11:47 -0400)]
C SIGHUP handling and config reloading
Sending the HUP signal to a C Listener process now results in the
following:
* Reload the opensrf_core config
* update the log file level
* kill idle child processes
* child processes that are active when the signal is received are
tracked and killed once they become idle.
* New children are spawned per the min child settings
The primary use case for these changes is temporarily changing the log
level for a given service for debug purposes. It may also
be used, for example, to gracefully recover excess RAM consumed by a
child process.
opensrf.xml (opensrf.settings config) is not reloaded, so min/max child
settings will not be affected.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Bill Erickson [Mon, 12 Aug 2013 15:33:11 +0000 (11:33 -0400)]
LP1204123 install opensrf-perl.pl as osrf_control
Symlink osrf_control to opensrf-perl.pl to act as the replacement for
osrf_ctl.sh. I chose "osrf_control" since it matches more closely to
"osrf_config" -- also it's probably less confusing than calling it
osrf_ctl, which would likely get confused w/ osrf_ctl.sh
TODO: documentation
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Bill Erickson [Fri, 9 Aug 2013 14:40:29 +0000 (10:40 -0400)]
LP1204123 opensrf-perl.pl expansion continued
* improved cleanup of stale pid files during startup
* added --force-clean-process option to kill orphan (no pidfile)
processes during startup
* other minor cleanup
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
opensrf-perl.pl can now stop/start/signal/etc. all opensrf services,
regardless of language. It is in effect a replacement for osrf_ctl.sh
with considerably broader powers.
To ease transition, osrf_ctl.sh has been taught to pass
start/stop/restart_all commands through to opensrf-perl.pl.
The layout of commands has changed some (e.g. --start-all instead of
--action start_all) and a host of new commands have been added.
Below are the full set of commands. See --help for full descriptions:
Bill Erickson [Wed, 31 Jul 2013 21:43:12 +0000 (17:43 -0400)]
LP1204123 Improved per-service control (C/Perl)
C opensrf no longer mantains a single master process. Instead, like
Perl, each Listener process writes its own PID file and can be managed
individually. Related to this, much code was cleaned up in
osrf_system.c.
osrf_ctl.sh now has the ability to stop/start individual services for
Perl and C, using the new -s <service> option. Examples:
osrf_ctl.sh -l -a restart_c -s opensrf.math
osrf_ctl.sh -l -a restart_perl -s opensrf.settings
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Bill Erickson [Wed, 24 Jul 2013 20:28:15 +0000 (16:28 -0400)]
LP1204123 Don't treat interrupts as errors
Interrupted calls to select() are generally not errors, but more likely
signals received by the process. Avoid setting the transport_client
error flag to true in these cases. Otherwise, after one signal is
received, no other outbound communication can occur on the client
connection.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
When a listener process receives the USR2 signal, the 'register' command
is sent to all known routers. This allows for the addition of new
routers to running opensrf services.
If a register command is sent to a router for which the process is
already successfully register, the router will safely discard it, so
multiple SIGUSR2 calls are safe.
Minor int => bool clarification repair to existing C shutdown
(prefork_clear) code.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
now sport an additional "reload" boolean parameter. When set, the settings
file (opensrf.xml) will be reloaded from the file system to pick up any
changes which have occurred since the last load/reload.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Bill Erickson [Mon, 22 Jul 2013 20:44:26 +0000 (16:44 -0400)]
LP1204123 SIGTERM graceful shutdown (C)
When a TERM signal is received, the listener parent process will wait
for all child processes to complete any active tasks before killing the
child processes and shutting down.
Receiving a SIGINT or SIGQUIT results in a non-graceful shutdown.
In all cases, the system first un-registers with all routers.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
The listener process will unregister all router connections. This
allows services to remove themselves from consideration for new
inbound requests while allowing their drone processes to complete
any currently running tasks.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Bill Erickson [Fri, 21 Jun 2013 20:43:01 +0000 (16:43 -0400)]
LP1204123 SIGTERM causes graceful shutdown (Perl)
When sent the SIGTERM signal, listener processes will wait for all child
processes to complete their currently running tasks before killing all
child processes and exiting.
SIGQUIT and SIGINT can still be used for semi-graceful shutdowns, where
the listener de-registers and cleans up child processes, but does not
wait for child processes to finish their tasks.
To kill with fire, SIGKILL is still your friend.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Bill Erickson [Wed, 26 Jun 2013 18:51:52 +0000 (14:51 -0400)]
LP1204123 Set SIGCHLD handler to DEFAULT for children (perl)
Remove the special SIGCHLD handler applied to the parent/listener
process from spawned child processes (drones) by setting child handler to
DEFAULT. Otherwise, if an OpenSRF drone process spawns a sub-process,
the drone will execute the SIGCHLD handler meant for the Listener when
the sub-process dies, wherein hijinks ensue.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
Get/set the locale used by all new client sessions
for the current process. This is primarily useful
for clients that wish to make a series of opensrf
calls and don't wish to set the locale for each new
AppSession object.
The caller should reset the locale when done using
reset_locale(), as the locale will otherwise persist
for the current process until set/reset again.
This is not for SERVER processes, since they
adopt the locale of their respective callers.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bill Erickson [Fri, 15 Mar 2013 19:56:55 +0000 (15:56 -0400)]
Multisession blocking repair
The new socket blocking code for multisession failed to take into
account that socket activity outside of the main block could lead to a
deadlock situation. For example:
* Check status of request A -> not complete
* Check status of request B -> whatever
* Request A may now be complete, since checking the status of any request
affects all requests
* Return to blocking loop because we think there is pending data, but in
fact all data has already been pulled from the socket.
The solution is for session_reap() to make a sweep and check for changes
in requests that are now complete as a side-effect of checking for
completed requests.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When running methods for clients, send plain warnings to "real" logs
Code inside an OpenSRF application method may use Perl libraries that warn
and carp like most Perl code is wont to do. Instead of letting
those message go to STDERR where they can be easily missed (and take up
lots of disk space on application boxes), why not catch them and
redirect them to our "real" logs using OpenSRF::Utils::Logger ?
Deployment of this change would probably have the side effect of bringing
to light bugs in applications (Evergreen) that will suddenly seem very
noisy.
Bill Erickson [Mon, 15 Oct 2012 21:23:19 +0000 (17:23 -0400)]
Perl SIGHUP handling and config reloading
Sending the HUP signal to a Perl Listener process now results in the
following:
* Reload the opensrf_core config
* re-init the logger
* kill idle child processes
* child processes that are active when the signal is received are
tracked and killed once they become idle.
* New children are spawned per the min child settings
The primary use case for these changes is temporarily changing the log
level (or log file) for a given service for debug purposes. It may also
be used, for example, to gracefully recover excess RAM consumed by a
child process.
Not all values in opensrf_core.xml are affected by a SIGHUP. Since the
goal is a gracful reload, no attempt is made by the listener process to
re-connect to jabber or re-register with the opensrf router(s). Child
processes will by necessity connect to Jabber during startup, though, so
any changes to the jabber configuration will affect child processes. In
general, it's best to affect jabber configuration changes with a true
service restart.
opensrf.xml (opensrf.settings config) is not reloaded, so min/max child
settings will not be affected.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bill Erickson [Thu, 31 Jan 2013 20:05:53 +0000 (15:05 -0500)]
Block on recv instead of loop/polling in MultiSession
When the time comes to wait for responses to arrive, block on the XMPP
socket (which uses select() under the covers) until data arrives,
instead of looping furiously and calling receive in non-blocking mode.
Before this change, waiting on responses resulted in long-running CPU
spikes.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
Galen Charlton [Sat, 23 Feb 2013 08:26:06 +0000 (00:26 -0800)]
LP#1132247: fix compilation warnings in C test cases
Also, since osrfList maintains a list of pointers, not
values, adjust some of the test cases to discourage
anybody inclined to copy-and-paste from the test cases
from storing pointers to stack variables in an osrfList.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Ben Shum <bshum@biblio.org>
Bill Erickson [Wed, 17 Oct 2012 18:31:02 +0000 (14:31 -0400)]
Enable client logtrace with environment vars
Supports a new environment variable OSRF_LOG_CLIENT which, if true,
enables control and generation of the client log trace value. This is
the same as setting <client>true</client> within the opensrf core
configuration file.
As a shortcut, if the MOD_PERL environment variable is set, assume
client=true.
This allows clients and non-clients to share an opensrf core
configuration file, when previously the only difference between the two
was the <client> setting.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
Dan Scott [Sun, 27 Jan 2013 16:08:12 +0000 (11:08 -0500)]
Test for Apache executable in sbin dirs
Debian apparently doesn't include /usr/sbin in the default user PATH, so
add an APXS2-like lookup with likely locations if we don't find the
apache executable in our standard path.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Jason Etheridge <jason@esilibrary.com> Signed-off-by: Ben Shum <bshum@biblio.org>
Dan Scott [Thu, 17 Jan 2013 02:59:22 +0000 (21:59 -0500)]
Support Apache 2.4 client IP address lookups
The Apache 2.4 API replaces the conn_rec->remote_ip member with
conn_rec->client_ip or conn_rec->useragent_ip (per
http://httpd.apache.org/docs/2.4/developer/new_api_2_4.html). client_ip
seems to be the best choice for us, to avoid everything being logged
from the load balancer or proxy instead of the client's address.
This code detects the version of Apache and uses client_ip if it is 2.4
or greater.
Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Tue, 26 Jun 2012 13:21:57 +0000 (09:21 -0400)]
Prevent "uninitialized value" warnings in parameter logging
Use of uninitialized value $p[0] in join or string at
/usr/local/share/perl/5.10.1/OpenSRF/Application.pm line 130.
This is caused when the array of method params contains null/undef
values. Prevent the warnings by replacing these values w/ empty
strings.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Dan Scott <dscott@laurentian.ca> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jason Stephenson [Wed, 31 Oct 2012 14:21:18 +0000 (10:21 -0400)]
Change OSRF_JAVA_DEPSDIR so building Java just works.
OSRF_JAVA_DEPSDIR was being set to /opt/java by configure without any
documentation to that effect. The src/java/deps.sh downloads the deps files
to src/java/deps. This means that you cannot just build java without either
copying the jars from src/java/deps or altering src/java/Makefile.
This edit changes the AC_SUBST call to replace OSRF_JAVA_DEPSDIR with deps,
so that you can at least build java without making any changes.
Signed-off-by: Jason Stephenson <jstephenson@mvlc.org> Signed-off-by: Bill Erickson <berick@esilibrary.com>
Bill Erickson [Thu, 1 Nov 2012 13:41:52 +0000 (09:41 -0400)]
Safer casting in java config parsing
Java config parsing, in particular getString and getInt, no longer fail
when encountering a number value in the internl JSON->Map object.
Java does not allow the following cast:
String s = (String) someNumber;
Instead, rely on the object's toString() which is safe and guaranteed
to exist.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Jason Stephenson <jstephenson@mvlc.org> Signed-off-by: Dan Scott <dscott@laurentian.ca>
Bill Erickson [Mon, 21 May 2012 20:42:12 +0000 (16:42 -0400)]
ChopChop is dead, long live ChopChop.
It was never fully baked, nor was it secure, nor does it compile cleanly
with -Wall, nor does it provide any useful examples for working with
opensrf, etc. Time to clear out. So long, chopchop.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Dan Scott <dscott@laurentian.ca>
Dan Scott [Tue, 6 Nov 2012 17:32:48 +0000 (12:32 -0500)]
Bump libopensrf version-info revision and age
The log redaction functionality changed the source files (thus 'age'
gets bumped) and is backwards-compatible (thus 'revision' gets bumped)
but maintains the same interface (thus 'current' stays the same).
Dan Wells [Wed, 31 Oct 2012 14:21:14 +0000 (10:21 -0400)]
Protect against empty/invalid log_protect sections
Connectivity would fail if the log_protect section of opensrf_core.xml
was empty, or contained only comments, as it does in the default
example. Add a simple guard against this potential problem. This fix
will also protect against cases where the 'log_protect' section
contains text rather than separate configuration elements.
Credit to Dan Scott for finding the bug and working out how to fix it.
Signed-off-by: Dan Wells <dbw2@calvin.edu> Signed-off-by: Dan Scott <dan@coffeecode.net>
Log redaction was not occuring in some cases because the code was using
the OSRF_METHOD_VERIFY_CONTEXT macro instead of the similarly named
function which does the same thing. This change points the macro at the
function so that all code uses the same underlying code.
Note this change turns on CALL param logging unconditionally, whereas
users of the macro would previously have been able to avoid CALL logging
via the OSRF_LOG_PARAMS variable. In practice, little code uses the
macro and all code enables OSRF_LOG_PARAMS. If we need to add this
control back, it can be added directly to osrfMethodVerifyContext().
For now, it's one less env variable we need to define.
Signed-off-by: Bill Erickson <berick@esilibrary.com> Signed-off-by: Dan Scott <dan@coffeecode.net>
Dan Wells [Fri, 12 Oct 2012 13:45:35 +0000 (09:45 -0400)]
Log redaction for sensitive input values, Perl side
This commit attempts to do the same as the C log redaction fix,
but now at the Perl level. The Perl configuration code was a
little more crufty than the C side, so an additional feature was
added to Config.pm to support the new 'shared' section. At some
point we should consider a ground-up rewrite of Config.pm, as the
code seems to suffer some from its INI file roots.
Signed-off-by: Dan Wells <dbw2@calvin.edu> Signed-off-by: Dan Scott <dan@coffeecode.net>
Dan Wells [Wed, 10 Oct 2012 21:28:07 +0000 (17:28 -0400)]
Log redaction for sensitive input values, C side
Some service/methods deal with sensitive information (passwords,
financial, etc.). All input values (e.g. gateway method params)
are currently logged in the activity log regardless of your log
level. This commit will allow you to redact the params of any
method which matches a configurable set of left-anchored string
values.
This commit adds the initial config, and covers redaction of method
parameters sent through the gateway, the translator, and more general
OpenSRF C applications.
Signed-off-by: Dan Wells <dbw2@calvin.edu> Signed-off-by: Dan Scott <dan@coffeecode.net>
Remove libreadline5-dev and replace with libreadline-dev for Ubuntu
and Debian. This installs libreadline6, but everything still works
since there's nothing version specific in our use of libreadline.
Signed-off-by: Jason Stephenson <jstephenson@mvlc.org> Signed-off-by: Dan Scott <dan@coffeecode.net>
Dan Scott [Mon, 22 Oct 2012 15:53:24 +0000 (11:53 -0400)]
Remove the reference to Evergreen in the README
Stephen Wills reported problems installing Evergreen because of missing
dependencies, and reading the OpenSRF README shows that it refers to the
Evergreen prerequisite installer in a confusing way that might lead to
users using only the Evergreen Makefile.install, rather than using the
OpenSRF Makefile.install.
In addition, Fedora 16 is going to be out of support soon, and Fedora 17
and 18 are well-tested targets now.
Dan Scott [Thu, 31 May 2012 02:33:17 +0000 (22:33 -0400)]
Bump version numbers to help with library compatibility
By bumping the OpenSRF version numbers for Perl libs, Python libraries,
and the libtool versioning for the libopensrf library, projects that
build on OpenSRF will be able to flag the minimum required version and
bail out early if an older version of OpenSRF has been installed.
Dan Scott [Tue, 22 May 2012 20:45:33 +0000 (16:45 -0400)]
Add "tar" to base prereqs to appease autotools
On a minimal install of Fedora 17, I was running into the perplexing
error message whilst running 'autoreconf -i':
libtoolize: can not copy `/usr/share/libtool/config/ltmain.sh' to `./'
This was confusing because a manual copy would, in fact, copy the file
just fine.
http://lists.gnu.org/archive/html/libtool/2009-07/msg00030.html finally
lead to enlightenment: autotools uses "tar" to copy files, not "cp".
Thus, to avoid similar head-scratching install problems in the future,
add "tar" to the base prerequisites for building OpenSRF (both to the
DEBs list and the RPMs list).
Does not check that all drones in a brick are fully up, just that the
entire brick will respond to each service, even if only one drone happens
to be running the listener properly (and said listener is responding).
Signed-off-by: Thomas Berezansky <tsbere@mvlc.org> Signed-off-by: Dan Scott <dan@coffeecode.net>
projects / OpenSRF.git / log