Evergreen.git
8 months agoBumping version numbers, adding Upgrade Script and Changelog tags/rel_3_1_9
blake [Wed, 16 Jan 2019 21:45:18 +0000 (15:45 -0600)]
Bumping version numbers, adding Upgrade Script and Changelog

Signed-off-by: blake <blake@mobiusconsortium.org>
8 months agofixed upgrade script naming convention
blake [Wed, 16 Jan 2019 21:45:05 +0000 (15:45 -0600)]
fixed upgrade script naming convention

Signed-off-by: blake <blake@mobiusconsortium.org>
8 months agobumping Perl version string for 3.1.9
blake [Wed, 16 Jan 2019 21:43:17 +0000 (15:43 -0600)]
bumping Perl version string for 3.1.9

Signed-off-by: blake <blake@mobiusconsortium.org>
8 months agoDocs: adding 3.1.9 release notes
Jane Sandberg [Wed, 16 Jan 2019 20:16:56 +0000 (12:16 -0800)]
Docs: adding 3.1.9 release notes

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
8 months agoTranslation updates - po files
Dan Wells [Wed, 16 Jan 2019 20:17:34 +0000 (15:17 -0500)]
Translation updates - po files

Signed-off-by: Dan Wells <dbw2@calvin.edu>
8 months agoTranslation updates - newpot
Dan Wells [Wed, 16 Jan 2019 20:02:46 +0000 (15:02 -0500)]
Translation updates - newpot

Signed-off-by: Dan Wells <dbw2@calvin.edu>
8 months agoLP1742521: Receipt Count Repair
Jason Boyer [Wed, 16 Jan 2019 13:36:40 +0000 (08:36 -0500)]
LP1742521: Receipt Count Repair

The div wrapping the receipt printing controls was
shown or hidden using an ng-if declaration which
created a new $scope as explained in bug 1696238,
which caused the controller to not notice that the
value was changed. Changing that to an ng-show
allows the updated value to get where it needs to
be.

Signed-off-by: Jason Boyer <jboyer@library.in.gov>
Signed-off-by: Mike Rylander <mrylander@gmail.com>
8 months agoLP1804716: grab recall-able copies before they are filtered out
Jeff Davis [Thu, 22 Nov 2018 23:46:56 +0000 (15:46 -0800)]
LP1804716: grab recall-able copies before they are filtered out

Signed-off-by: Jeff Davis <jdavis@sitka.bclibraries.ca>
Signed-off-by: Bill Erickson <berickxx@gmail.com>
8 months agoLp 1803734: Only push on-order purchase orders in edi_order_pusher.pl.
Jason Stephenson [Thu, 10 Jan 2019 18:45:45 +0000 (13:45 -0500)]
Lp 1803734: Only push on-order purchase orders in edi_order_pusher.pl.

Add a check for the state of purchase orders being on-order when
gathering them in edi_order_pusher.pl.

Signed-off-by: Jason Stephenson <jason@sigio.com>
Signed-off-by: Chris Sharp <csharp@georgialibraries.org>
9 months agoLP1782652: Make template dropdown larger in Volume/Copy Editor
Jane Sandberg [Thu, 27 Sep 2018 14:53:35 +0000 (07:53 -0700)]
LP1782652: Make template dropdown larger in Volume/Copy Editor

To test:
1) Open an item in the volume/copy editor.
2) Go to the Copy Templates tab. Note the spacing of the template bar.
3) Create a few templates.  Give them names of 30 characters or more.
4) Go back to the Edit tab and select one of your new templates.  Note
that after you have selected it, the name of your template does not fit
in the dropdown box, and is cut off at the end.
5) Apply this commit.
6) Go to the Copy Templates tab again.  Note that the spacing of the
template bar has not changed.
7) Go to the Edit tab.  Note that the template dropdown has changed
to be much larger.

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
Signed-off-by: Janet Schrader <jschrader@cwmars.org>
Signed-off-by: Jason Stephenson <jason@sigio.com>
9 months agoAdd Release Notes for Lp 1662535 & Lp 1743783
Jason Stephenson [Fri, 14 Dec 2018 16:31:45 +0000 (11:31 -0500)]
Add Release Notes for Lp 1662535 & Lp 1743783

Signed-off-by: Jason Stephenson <jason@sigio.com>
9 months agoLP#1743783 Web Client Bill Full Detail Display Issues
Terran McCanna [Wed, 12 Dec 2018 22:57:19 +0000 (17:57 -0500)]
LP#1743783 Web Client Bill Full Detail Display Issues

Fleshes out retrieved data to be able to display the billing
location for both circulation and grocery bills on the full
details page as well as the owning library for circulation bills.

Signed-off-by: Terran McCanna <tmccanna@georgialibraries.org>
Signed-off-by: John Amundson <jamundson@cwmars.org>
Signed-off-by: Jason Stephenson <jason@sigio.com>
9 months agoLP#1662535 Patron Bill Grid Columns
Terran McCanna [Thu, 13 Dec 2018 02:56:55 +0000 (21:56 -0500)]
LP#1662535 Patron Bill Grid Columns

1) Adding missing columns, including:

- Call Number
- Owning Library
- Shelving Location
- Last Billing Note
- Last Billing Timestamp
- Last Payment Timestamp
- Last payment Note
- Last Payment Type

2) Corrected path for Type

3) Changed column name for Location to 'Billing Location'
and the former Billing Location to 'Grocery Billing Location' for clarity

Signed-off-by: Terran McCanna <tmccanna@georgialibraries.org>
Signed-off-by: John Amundson <jamundson@cwmars.org>
Signed-off-by: Jason Stephenson <jason@sigio.com>
9 months agoDocs: LP#1731048: Update json_query documentation for new join syntax
Remington Steed [Mon, 26 Nov 2018 19:10:36 +0000 (14:10 -0500)]
Docs: LP#1731048: Update json_query documentation for new join syntax

This commit simply adds the text from the related commit message (see
LP#1527731) to the original DocBook file. NOTE: This documentation is
also available on the wiki, and has been updated there as well:

https://wiki.evergreen-ils.org/doku.php?id=documentation:tutorials:json_query

Signed-off-by: Remington Steed <rjs7@calvin.edu>
9 months agoDocs: virtual index definitions
kilsdonka [Wed, 19 Sep 2018 22:41:45 +0000 (15:41 -0700)]
Docs: virtual index definitions

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
9 months agoDocs: Infrastructure changes to authority browse
kilsdonka [Wed, 19 Sep 2018 22:59:59 +0000 (15:59 -0700)]
Docs: Infrastructure changes to authority browse

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
9 months agoDocs: LP1783387: update print templates to reflect new name
katiegmartin [Thu, 2 Aug 2018 19:06:28 +0000 (15:06 -0400)]
Docs: LP1783387: update print templates to reflect new name

launchpad 1783387 - update receipt template editor documentation to reflect language change to "print templates" in web client
put both terms in index
updated title to Print (Receipt) Templates

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
9 months agoDocs: Update basic_holds.adoc
abneiman [Wed, 13 Jun 2018 18:50:19 +0000 (14:50 -0400)]
Docs: Update basic_holds.adoc

Removing reference to XUL

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
9 months agoDocs: Update marc_tag_table.adoc
abneiman [Wed, 13 Jun 2018 18:46:50 +0000 (14:46 -0400)]
Docs: Update marc_tag_table.adoc

Striking reference to "sprint 2 preview".  Adding location information & screenshots.

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
9 months agoDocs: Binding Template added to G-binding.adoc
jamundson5 [Mon, 9 Jul 2018 19:03:11 +0000 (15:03 -0400)]
Docs: Binding Template added to G-binding.adoc

Added a section on how to apply a binding template to a distribution as this is necessary to ensure the binding does not fail. Also updated an instance of "Action" to "Actions".

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
9 months agoLP#1739606: Allow saving Billing History xacts grid
Remington Steed [Mon, 26 Nov 2018 15:04:28 +0000 (10:04 -0500)]
LP#1739606: Allow saving Billing History xacts grid

For a web staff eg-grid to save and retrieve its settings, it needs a
unique persist-key. This commit adds one for the Transactions tab grid
under Billing History (on patron record Bills tab, click the History
grid button).

Signed-off-by: Remington Steed <rjs7@calvin.edu>
Signed-off-by: Terran McCanna <tmccanna@georgialibraries.org>
Signed-off-by: Jason Stephenson <jason@sigio.com>
9 months agoLP#1746769 - add item tag owner OU to label in volcopy editor
Cesar Velez [Tue, 6 Nov 2018 19:14:04 +0000 (14:14 -0500)]
LP#1746769 - add item tag owner OU to label in volcopy editor

Adding the owner to differentiate item tags with same label
that are owned by different OU.

Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>

Signed-off-by: Jason Etheridge <jason@EquinoxInitiative.org>
9 months agoForward-port 3.1.8 upgrade script
Dan Wells [Tue, 27 Nov 2018 22:02:59 +0000 (17:02 -0500)]
Forward-port 3.1.8 upgrade script

Signed-off-by: Dan Wells <dbw2@calvin.edu>
9 months agoDocs: Copy alerts documentation
kilsdonka [Mon, 26 Nov 2018 19:40:57 +0000 (11:40 -0800)]
Docs: Copy alerts documentation

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
9 months agoDocs: removing broken link from circ manual
Jane Sandberg [Mon, 26 Nov 2018 19:35:56 +0000 (11:35 -0800)]
Docs: removing broken link from circ manual

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
10 months agoTranslation updates - po files
Dan Wells [Tue, 20 Nov 2018 19:38:42 +0000 (14:38 -0500)]
Translation updates - po files

Signed-off-by: Dan Wells <dbw2@calvin.edu>
10 months agoTranslation updates - newpot
Dan Wells [Tue, 20 Nov 2018 19:32:22 +0000 (14:32 -0500)]
Translation updates - newpot

Signed-off-by: Dan Wells <dbw2@calvin.edu>
10 months agoDocs: Multilingual search documentation
kilsdonka [Tue, 20 Nov 2018 17:50:54 +0000 (09:50 -0800)]
Docs: Multilingual search documentation

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
10 months agoDocs: adding release notes for 3.1.8
Jane Sandberg [Tue, 20 Nov 2018 16:18:34 +0000 (08:18 -0800)]
Docs: adding release notes for 3.1.8

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
10 months agoLP#1643709: Stamping upgrade script
Ben Shum [Tue, 20 Nov 2018 14:25:57 +0000 (09:25 -0500)]
LP#1643709: Stamping upgrade script

Note upgrade script 1137 is only for rel_3_1. In master/rel_3_2 there is
upgrade script 1138 for this same function change.

Signed-off-by: Ben Shum <ben@evergreener.net>
10 months agoLP#1643709 User merge + purge pgtap test
Rogan Hamby [Fri, 14 Sep 2018 13:25:57 +0000 (09:25 -0400)]
LP#1643709 User merge + purge pgtap test

Signed-off-by: Rogan Hamby <rogan.hamby@gmail.com>
Signed-off-by: Bill Erickson <berickxx@gmail.com>
Signed-off-by: Ben Shum <ben@evergreener.net>
10 months agoLP#1643709 purge users on merge instead of flag deleted
Rogan Hamby [Fri, 14 Sep 2018 12:05:12 +0000 (08:05 -0400)]
LP#1643709 purge users on merge instead of flag deleted

Purge merged user accounts.

Update the upgraded version of the usr_merge() db function to match
recnet changes in master.

Signed-off-by: Rogan Hamby <rogan.hamby@gmail.com>
Signed-off-by: Bill Erickson <berickxx@gmail.com>
Signed-off-by: Ben Shum <ben@evergreener.net>
10 months agoLP1801156: Add missing offline dependencies
Jason Boyer [Fri, 2 Nov 2018 16:26:18 +0000 (12:26 -0400)]
LP1801156: Add missing offline dependencies

When iframeResizer.js is missing from the UpUp asset list the
loading error prevents further processing, rendering offline
mode unusable.

Signed-off-by: Jason Boyer <JBoyer@library.in.gov>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Bill Erickson <berickxx@gmail.com>
10 months agoLP#1761242 Z39.50 Marc View Usability with Mobile Repsonsiveness
Garry Collum [Sat, 16 Jun 2018 18:13:22 +0000 (14:13 -0400)]
LP#1761242 Z39.50 Marc View Usability with Mobile Repsonsiveness

This patch changes the size of the image in the Z39.50 Marc View from large to
medium.  It also incorporates bootstrap's media classes to present the Marc
record and the cover image side by side.  If there is no image the marc record
display floats to the left of the modal. From a suggestion by Jane Sandbert, it
also hides the book cover image on small devices.

To test.
1. Perform a search in z39.50.  An LOC title search for "Cat in the Hat"
   returms results of titles with and without images.
2. View some of the titles in Marc View, noting the large image.
3. Apply the patch.
4. Perform the same search and view the results in Marc View.

Signed-off-by: Garry Collum <gcollum@gmail.com>
Signed-off-by: Janet Schrader <jschrader@cwmars.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLp 1753813: Wrap all oils_persist:source_definitions in CDATA blocks.
Jason Stephenson [Mon, 17 Sep 2018 14:08:34 +0000 (10:08 -0400)]
Lp 1753813: Wrap all oils_persist:source_definitions in CDATA blocks.

For safety's sake, we add CDATA sections in all fm_ILD.xml
oils_persist:source_definition elements as show in the example at the
top of the IDL.

Signed-off-by: Jason Stephenson <jason@sigio.com>
Signed-off-by: Ben Shum <ben@evergreener.net>
10 months agoLP#1764542: Fixing upgrade script numbering
Ben Shum [Mon, 19 Nov 2018 03:06:21 +0000 (22:06 -0500)]
LP#1764542: Fixing upgrade script numbering

Signed-off-by: Ben Shum <ben@evergreener.net>
10 months agoLP#1764542: Stamping upgrade script
Ben Shum [Mon, 19 Nov 2018 02:58:38 +0000 (21:58 -0500)]
LP#1764542: Stamping upgrade script

Signed-off-by: Ben Shum <ben@evergreener.net>
10 months agoLP#1764542 - Update older sites to MODS 3.3
Chris Sharp [Mon, 4 Jun 2018 17:10:31 +0000 (13:10 -0400)]
LP#1764542 - Update older sites to MODS 3.3

MODS 3.3 support was introduced in March 2009, but this
change was never included in an upgrade script.  Older
sites on 3.1+ will need to apply this update to avoid scary
segmentation faults, and it should be harmless for newer
sites and desirable for those on 3.0 or older.

Signed-off-by: Chris Sharp <csharp@georgialibraries.org>
Signed-off-by: Ben Shum <ben@evergreener.net>
10 months agoLP1755625: Multiple emails in patron editor
Jason Boyer [Thu, 15 Nov 2018 16:43:30 +0000 (11:43 -0500)]
LP1755625: Multiple emails in patron editor

Even though the HTML5 "email" input type allows multiple
addresses to be separated by commas there is nothing that
can be done to signal to Angular.js that this is ok; it
will only ever accept a single address. This patch forces
the type of the input tag to plain text so Angular will
rely on any supplied regex to verify the entry.

The ui.patron.edit.au.email.regex (Regex for email field on patron
registration) library setting can be used to control whether
one or multiple email addresses will be permitted on the
patron registration form.

To allow multiple addresses, that setting can be:

^(?:(?:\b[^@,\s]+@[^@,\s]+\.[^@.,\s]+\b)(?:,\s?(?!$)|$))*$

To allow only a single address, use:

^(?:\b[^@,\s]+@[^@,\s]+\.[^@.,\s]+\b)$

To test
-------
[1] In the web staff client, try to register a new patron, entering
    multiple email addresseses in the email field separated by
    commas.
[2] Note that the email field displays as invalid and the
    record cannot be saved.
[3] Apply the patch and repeat step #1, This time, the email
    field should accept multiple addresses.
[4] Set the Regex for email field on patron registration library
    setting to the multiple-email form listed above. Reload
    the patron registration form and verify that it will
    continue to accept multiple email addresses but will not
    accept entry that doesn't look like an email address.
[5] Set the library setting to the single-address value. Reload
    the patron registration form; this time it should accept
    a valid email address but not multiple ones.

Signed-off-by: Jason Boyer <jboyer@library.in.gov>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Cesar Velez <cesar.velez@equinoxinitiative.org>
10 months agoDocs: LP#1578719 Update DIG Attributions page
Jeanette Lundgren [Wed, 12 Sep 2018 19:52:21 +0000 (15:52 -0400)]
Docs: LP#1578719 Update DIG Attributions page

Signed-off-by: Jeanette Lundgren <jlundgren@cwmars.org>
Signed-off-by: Ben Shum <ben@evergreener.net>
10 months agoLP#1797007 Grid cell tooltips apply to all cells
Bill Erickson [Mon, 5 Nov 2018 15:52:17 +0000 (10:52 -0500)]
LP#1797007 Grid cell tooltips apply to all cells

Avoid excessive browser page re-flows, caused by checking cell widths
for rendering tooltips, by rendering tooltips for all cells regardless
of the size of the content.

This reverts commit 1e9c0ab388a0697a1f099970240f2da21bfb5e1f.

Signed-off-by: Bill Erickson <berickxx@gmail.com>
Signed-off-by: Jason Boyer <JBoyer@library.in.gov>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1684202 - fix holdings grid refresh... bre_id array always be integers
Cesar Velez [Wed, 7 Nov 2018 16:09:10 +0000 (11:09 -0500)]
LP#1684202 - fix holdings grid refresh... bre_id array always be integers

For some strange reason the volcopy bchannel event data.records
would be an array of string integers or a array of ints depending
on whether you're adding or editing holdings. This addresses that
weirdness.

Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>

Signed-off-by: Chris Sharp <csharp@georgialibraries.org>
10 months agoLP#1684202 - fix bug the prevented automatic refresh
Cesar Velez [Wed, 17 Oct 2018 22:06:01 +0000 (18:06 -0400)]
LP#1684202 - fix bug the prevented automatic refresh

Turns out that Array.includes() does not do implicit type convertions
Typical javascript...

Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>

Signed-off-by: Chris Sharp <csharp@georgialibraries.org>
10 months agoLP#1684202: Protect against missing features; Make feature more general
Mike Rylander [Fri, 14 Sep 2018 15:03:30 +0000 (11:03 -0400)]
LP#1684202: Protect against missing features; Make feature more general

I've wrapped the BroadcastChannel code in a test derived from the auth version
of the same concept.  Also broadcasting the full set of record IDs and the
pre-update call number IDs for other interfaces that might be interested. The
channel name is also made more generic and made to follow the precedent from
the auth channel name.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Chris Sharp <csharp@georgialibraries.org>
10 months agoStamping upgrade script
Mike Rylander [Mon, 12 Nov 2018 17:26:40 +0000 (12:26 -0500)]
Stamping upgrade script

Signed-off-by: Mike Rylander <mrylander@gmail.com>
10 months agoLP#1773479 Show Located URIs in browse
Dan Wells [Fri, 9 Nov 2018 17:28:08 +0000 (12:28 -0500)]
LP#1773479 Show Located URIs in browse

Located URIs depend upon bib-level visibility, as there are no copies
to work with.  The browse code, however, was joining in the copy
visibility table as if it would always have at least one row per bib,
but in the case of located URIs, it does not.

Let's change it to a LEFT JOIN to allow the bib row to show up, at
which point the existing bib visibility check can do its job.

Signed-off-by: Dan Wells <dbw2@calvin.edu>
Signed-off-by: Mike Rylander <mrylander@gmail.com>
10 months agoLP#1724348 Honor default tab from catalog search
Dan Wells [Wed, 24 Oct 2018 18:38:01 +0000 (14:38 -0400)]
LP#1724348 Honor default tab from catalog search

The default tab selection was not being honored from catalog searches,
as the search had already set $scope.record_tab, and we were honoring
that value in all cases.

Instead, let's honor that value in cases where the OPAC load doesn't
change our current record, which should only happen if we load the
record directly to a non-opac tab, then go to the OPAC view.

To test:
1) Set any tab other than "OPAC View" as your default view in record
details.
2) Do a catalog search.
3) Select a record, and notice your default view is not set.
4) Apply patch, do the same steps, and notice the default view is now
selected.

To test regression of bug #1708951:
1) In Firefox, load a record directly (e.g.
/eg/opac/staff/cat/catalog/record/123).
2) Note the default view loaded.
3) Click "OPAC View".
4) Note the view does not return to your default view, but stays on
the OPAC.

Signed-off-by: Dan Wells <dbw2@calvin.edu>
Signed-off-by: Jason Boyer <JBoyer@library.in.gov>
10 months agoLP#1783602: Remove copy counts from mr search results page
Kathy Lussier [Wed, 25 Jul 2018 15:51:06 +0000 (11:51 -0400)]
LP#1783602: Remove copy counts from mr search results page

The copy counts on the mr search results page can be wrong if a limiter was
applied to the metarecord search. Rather than supply inaccurate information to
the user, let's remove the counts from that page until a long-term solution can
be developed.

Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Signed-off-by: Remington Steed <rjs7@calvin.edu>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1755543: Change placement of help popovers
Kathy Lussier [Mon, 5 Nov 2018 20:50:24 +0000 (15:50 -0500)]
LP#1755543: Change placement of help popovers

Set the placement of help tip popovers so that they automatically position
to a visible place on the screen.

Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Signed-off-by: Remington Steed <rjs7@calvin.edu>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1755543: Add help tips to Print Item Labels Settings tab
Kathy Lussier [Tue, 13 Mar 2018 16:54:42 +0000 (12:54 -0400)]
LP#1755543: Add help tips to Print Item Labels Settings tab

Instead of providing lengthy settings descriptions, which result in a lot of
scrolling on the Print Item Template page, let's use help tips that can
provide guidance to new users without adding clutter to the interface.

This commit also turns the field labels into HTML labels for improved
accessibility and removes borders on the page. The borders were helpful
when we displayed the help text on the page, but are no longer needed.

Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Signed-off-by: Remington Steed <rjs7@calvin.edu>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1755896: Web Client mobile menu font color contrast.
Garry Collum [Thu, 7 Jun 2018 18:54:45 +0000 (14:54 -0400)]
LP#1755896: Web Client mobile menu font color contrast.

When viewing the main menu in the web client in a small device or in a
browser with a width that is resized to less than 800px the menu
collapses and the submenu choices are difficult to read because of lack
of contrast.  This patch adds some contrast.

To test:
1. View the web client in a browser and lessen the width until the menu
   collapses, or view it in a small device.
2. Open some of the menu options to observe the submenus.
3. Apply the patch.
4. Refresh the browser and repeat steps 1-2 to view the more readable
   submenus.

Signed-off-by: Garry Collum <gcollum@gmail.com>
Signed-off-by: Terran McCanna <tmccanna@georgialibraries.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1789747: tweak disabling the offline circulation link
Galen Charlton [Mon, 5 Nov 2018 21:40:34 +0000 (16:40 -0500)]
LP#1789747: tweak disabling the offline circulation link

This patch ensures that the menu link can be fully disabled by
giving the "disabled" CSS class to the anchor as well as the
li that contains it. It also adds a CSS rule to the disabled
class to force the cursor to not-allowed; due to a quirk, an
anchor with "pointer-events: none" will not respect "cursor: not-allowed",
but the containing element can have that cursor rule.

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1789747 More SharedWorker sanity checks for egLovefield
Bill Erickson [Tue, 4 Sep 2018 19:09:31 +0000 (15:09 -0400)]
LP#1789747 More SharedWorker sanity checks for egLovefield

Signed-off-by: Bill Erickson <berickxx@gmail.com>
Signed-off-by: Rogan Hamby <rhamby@equinoxinitiative.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1789747 SharedWorker sanity checks
Bill Erickson [Thu, 30 Aug 2018 17:19:03 +0000 (13:19 -0400)]
LP#1789747 SharedWorker sanity checks

Avoid page load failures when SharedWorkers (for offline mode) are
not supported.  Additionally, disable the Offline Circulation menu
option when SharedWorkers are not supported.

Signed-off-by: Bill Erickson <berickxx@gmail.com>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1801759: enable mod_remoteip by default
Galen Charlton [Mon, 5 Nov 2018 17:54:24 +0000 (12:54 -0500)]
LP#1801759: enable mod_remoteip by default

Use of mod_remoteip is technically optional, since it's not
required that Evergreen run with a proxy such as NGINX. However, since
use of proxies is common, enablig mod_remoteip just in case could
be useful with minimal cost.

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Bill Erickson <berickxx@gmail.com>
10 months agoLP#1801759: add mod_remoteip configuration to example Apache config
Galen Charlton [Mon, 5 Nov 2018 17:49:35 +0000 (12:49 -0500)]
LP#1801759: add mod_remoteip configuration to example Apache config

Text taken from an OpenSRF patch added by Bill Erickson per bug 1684970.

This patch adds an Apache configuration stanza that uses mod_remoteip
to pass the user agent's IP address to the HTTP translator. It is meant
for when Apache is being run behind a proxy such as NGINX.

To test
-------
[1] Set up Evergreen with Apache and the WebSockets server running
    behind a proxy such as NGINX.
[2] Enable mod_remoteip (e.g., sudo a2enmod remoteip).
[3] Apply the Apache configuration change in this patch, uncommenting
    out the directives and (if necessary) updating the internal IP
    address of the proxy.
[4] Reload Apache.
[5] Perform an action that uses the HTTP translator, e.g., adding a
    vendor record using the Dojo interface.
[6] Verify that the client IP logged is that of the user agent, not
    the proxy.

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Bill Erickson <berickxx@gmail.com>
10 months agoDocs: Update old command osrf_ctl.sh to osrf_control
Remington Steed [Fri, 2 Nov 2018 19:00:55 +0000 (15:00 -0400)]
Docs: Update old command osrf_ctl.sh to osrf_control

Thanks to Rosie Le Faive for catching this problem, and providing the
solution!

Signed-off-by: Remington Steed <rjs7@calvin.edu>
10 months agoLP1796988: Fix Saving Last Copy Template
Jason Boyer [Fri, 26 Oct 2018 13:16:14 +0000 (09:16 -0400)]
LP1796988: Fix Saving Last Copy Template

A line that belongs within a forEach loop escaped
its bounds and caused a reference error that prevented
the applyTemplate function from saving the last used
template. This branch ushers this line back to its
pen where it can trouble us no more.

Signed-off-by: Jason Boyer <jboyer@library.in.gov>
Signed-off-by: Janet Schrader <jschrader@cwmars.org>
Signed-off-by: Jason Stephenson <jason@sigio.com>
10 months agoForward Port Release Notes for 3.0.13.
Jason Stephenson [Thu, 25 Oct 2018 13:35:37 +0000 (09:35 -0400)]
Forward Port Release Notes for 3.0.13.

Signed-off-by: Jason Stephenson <jason@sigio.com>
10 months agoForward-port 3.1.7 upgrade script
Dan Wells [Wed, 24 Oct 2018 22:18:48 +0000 (18:18 -0400)]
Forward-port 3.1.7 upgrade script

Signed-off-by: Dan Wells <dbw2@calvin.edu>
10 months agoTranslation updates - po files
Dan Wells [Wed, 24 Oct 2018 20:36:04 +0000 (16:36 -0400)]
Translation updates - po files

Signed-off-by: Dan Wells <dbw2@calvin.edu>
10 months agoTranslation updates - newpot
Dan Wells [Wed, 24 Oct 2018 20:30:49 +0000 (16:30 -0400)]
Translation updates - newpot

Signed-off-by: Dan Wells <dbw2@calvin.edu>
10 months agoDocs: adding another entry to 3.1.7 release notes
Jane Sandberg [Wed, 24 Oct 2018 16:33:23 +0000 (09:33 -0700)]
Docs: adding another entry to 3.1.7 release notes

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
10 months agoLP#1797923 Browser client iframe initial loading page
Bill Erickson [Mon, 15 Oct 2018 15:43:33 +0000 (11:43 -0400)]
LP#1797923 Browser client iframe initial loading page

Apply a default value to the browser client iframe URL so the iframe
does not attempt to load a copy of the current page.  The default value
points to a simple loading page, displying "Loading..." plus our
standard spinny gif.

Progress gif copied from web/opac/images/ to web/images/ to avoid
dependence on the old opac directory.

Signed-off-by: Bill Erickson <berickxx@gmail.com>
Signed-off-by: Jason Boyer <jboyer@library.in.gov>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoDocs: adding release notes for 3.1.7
Jane Sandberg [Wed, 24 Oct 2018 16:02:37 +0000 (09:02 -0700)]
Docs: adding release notes for 3.1.7

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
10 months agoLP#1746536: Remove input-group-addon class from Add Call Number button
Kathy Lussier [Wed, 26 Sep 2018 18:45:26 +0000 (14:45 -0400)]
LP#1746536: Remove input-group-addon class from Add Call Number button

The button no longer looks like a button with this class in place.

Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1746536: Restrict CN addition but allow CN edits...
Mike Rylander [Wed, 26 Sep 2018 16:57:04 +0000 (12:57 -0400)]
LP#1746536: Restrict CN addition but allow CN edits...

... in the top half of the Vol/Copy editor when there are multiple bib records
represented in the UI.

Also, restrict the size of the org selector using a bootstrap row.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Conflicts:
Open-ILS/src/templates/staff/cat/volcopy/t_edit.tt2
Open-ILS/web/js/ui/default/staff/cat/volcopy/app.js

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1746536: Allow batch-apply to volume fields in multi-record context
Mike Rylander [Wed, 19 Sep 2018 14:38:42 +0000 (10:38 -0400)]
LP#1746536: Allow batch-apply to volume fields in multi-record context

I can't see a reason to restrict Batch Apply for volume fields in a multi-
record context, as all the data is gathered based on the volume owners, not
record information.  This commit removes that restriction.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1746536 - enable volcopy editor for multi-bib but only volumes
Cesar Velez [Wed, 12 Sep 2018 09:37:28 +0000 (05:37 -0400)]
LP#1746536 - enable volcopy editor for multi-bib but only volumes

This removes the disabling of the volcopy editor caused by
passing it a record id of 0. Allowing the Item Status grid's
Edit>Volumes to function as a way to batch edit volumes of
more than 1 bib record.

Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>
Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP1746536: cannot edit vol/call number in item status
a. bellenir [Wed, 27 Jun 2018 18:48:56 +0000 (14:48 -0400)]
LP1746536: cannot edit vol/call number in item status

spawnHoldingsEdit was disabling record summary by passing record_id: 0
this change will provided the record_id if exactly one record is selected.
behavior is unchanged if multiple records are selected.

Signed-off-by: a. bellenir <ab@grpl.org>
Signed-off-by: cesar velez <cesar.velez@equinoxinitiative.org>
Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Conflicts:
Open-ILS/web/js/ui/default/staff/circ/services/item.js

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1739087 - add [x] to volcopy editor volume rows-FollowUp
Cesar Velez [Thu, 16 Aug 2018 21:40:56 +0000 (17:40 -0400)]
LP#1739087 - add [x] to volcopy editor volume rows-FollowUp

Since we're programmatically changing the Volume counter,
must manually trigger the change event, to prevent sync issues.

Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>

Signed-off-by: Jason Etheridge <jason@EquinoxInitiative.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
10 months agoLP#1739087 - add [x] to volcopy editor volume rows
Cesar Velez [Fri, 27 Jul 2018 15:21:25 +0000 (11:21 -0400)]
LP#1739087 - add [x] to volcopy editor volume rows

Enable newly created call numbers to be removable in
VolCopyEditor.

Signed-off by: Cesar Velez <cesar.velez@equinoxinitiative.org>
Signed-off-by: Jason Etheridge <jason@EquinoxInitiative.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
11 months agoLP#1796978 Realign working copy refresh with proper condition
Dan Wells [Wed, 10 Oct 2018 20:07:24 +0000 (16:07 -0400)]
LP#1796978 Realign working copy refresh with proper condition

The "working copy" grid needs to update whenever the copy data above
updates.  I *believe* this aligns the refresh with its intended
condition.

This appears to have come about via bug #1732761, so retesting of
that fix may be in order.

Signed-off-by: Dan Wells <dbw2@calvin.edu>
Signed-off-by: Jason Stephenson <jason@sigio.com>
Signed-off-by: Cesar Velez <cesar.velez@equinoxinitiative.org>
11 months agoLP#1796971 Wait for call number and copy before loading locations
Dan Wells [Thu, 11 Oct 2018 13:21:05 +0000 (09:21 -0400)]
LP#1796971 Wait for call number and copy before loading locations

In cases where add a copy to a call number, we fetch the original
call number via async, then attach the new copy to it.  Before this
commit, however, we were not waiting for the call number fetch
promise to resolve, so the copy wasn't there to use for limiting the
location load.

Since the async request is internal to a loop, one way out is to
capture that promise, then make sure it resolves before loading the
locations.

(We previously returned the copies from the internal function, but that
value wasn't being used anyway, so we don't worry about unwrapping the
$q.all() when it resolves.)

Signed-off-by: Dan Wells <dbw2@calvin.edu>
Signed-off-by: John Amundson <jamundson@cwmars.org>
Signed-off-by: Jason Stephenson <jason@sigio.com>
Signed-off-by: Cesar Velez <cesar.velez@equinoxinitiative.org>
Conflicts:
Open-ILS/web/js/ui/default/staff/cat/volcopy/app.js

11 months agoLP#1785681 Patron address copy to clipboard
Bill Erickson [Mon, 6 Aug 2018 19:18:35 +0000 (15:18 -0400)]
LP#1785681 Patron address copy to clipboard

Support copying formatted addresses to the clipboard in the browser
staff client, similar to the XUL client.  Action is performed via a new
link in the addresses section (next to "print") in the patron summary
sidebar.

Signed-off-by: Bill Erickson <berickxx@gmail.com>
Signed-off-by: Garry Collum <gcollum@gmail.com>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
11 months agoLP#1721139: apply proper date format in certain places
Galen Charlton [Tue, 11 Sep 2018 18:58:29 +0000 (14:58 -0400)]
LP#1721139: apply proper date format in certain places

This patch ensures that the correct date format is used
to display dates in certain contexts in the web staff
client:

- patron bucket summary
- record bucket summary
- patron bucket 'View batch edits'

This has the side effect of fixing a problem where the batch
edit timestamps were not wrapped correctly in Firefox.

To test
-------
1. Using user buckets, make some batch changes on some patrons and roll
   back some of those changes.
2. Using Firefox, click on the 'View Batch Edits' button.
3. Note that the times dispayed are formatted as raw
   database timestamps
4. Note that the summary for the user bucket displays the
   create time as a raw database timestamp.
5. Navigate to a record bucket and note that its create
   time is displayed as a raw timestamp as well.
3. Apply patch.
4. Repeat steps 2-5; this time, the times should be displayed
   using the correct date and time format.

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Garry Collum <gcollum@gmail.com>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
11 months agoLP#1778083 Location, Floating, and Age Protect missing from Items Out
Garry Collum [Thu, 21 Jun 2018 23:41:48 +0000 (19:41 -0400)]
LP#1778083 Location, Floating, and Age Protect missing from Items Out

Adds columns for Location (Copy), Floating Group, and Age-based Hold
Protection to the items out grid.

To test.
1. View an items out screen to see that the Location, Floating Group,
   and Age-based Hold protection columns are not available as options.
2. Apply the patch.
3. Edit some items and add definitions for Floating Group, and
   Age-based hold protection.
4. Check out these items and other items that do not have a floating
   group or age-based protection.
5. Display the Location, Floating Group, and Age-based Hold Protection
   columns.

Signed-off-by: Garry Collum <gcollum@gmail.com>
Signed-off-by: Dawn Dale <ddale@georgialibraries.org>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
11 months agoLP#1770246: (follow-up) display the open-in-new-window/tab icon
Galen Charlton [Fri, 5 Oct 2018 20:41:04 +0000 (16:41 -0400)]
LP#1770246: (follow-up) display the open-in-new-window/tab icon

Since the title links added by the previous patch intentionally open
the record in a new tab, display the corresponding icon to be
consistent with other interfaces.

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
11 months agoLP#1770246 Catalog linked title column in query and pending buckets
Garry Collum [Fri, 1 Jun 2018 01:22:35 +0000 (21:22 -0400)]
LP#1770246 Catalog linked title column in query and pending buckets

To mirror the Record Bucket View grid, this patch adds a title column
in the query and pending bucket tabs that links to the catalog record
of the title displayed. The catalog record is opened in a new tab, so
the query and pending data is not lost.

Signed-off-by: Garry Collum <gcollum@gmail.com>
Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
11 months agoDocs: adding basic info about printing spine labels
Jane Sandberg [Thu, 4 Oct 2018 18:53:59 +0000 (11:53 -0700)]
Docs: adding basic info about printing spine labels

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
11 months agoDocs: Adding info about copy number
Jane Sandberg [Tue, 2 Oct 2018 02:48:32 +0000 (19:48 -0700)]
Docs: Adding info about copy number

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
11 months agoForward-port 3.1.6 upgrade script
Dan Wells [Thu, 27 Sep 2018 21:56:00 +0000 (17:56 -0400)]
Forward-port 3.1.6 upgrade script

Signed-off-by: Dan Wells <dbw2@calvin.edu>
11 months agoDocs: adding another fix to the 3.1.6 release notes
Jane Sandberg [Wed, 26 Sep 2018 23:21:07 +0000 (16:21 -0700)]
Docs: adding another fix to the 3.1.6 release notes

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
11 months agoDocs: adding another fix to the 3.0.12 release notes
Jane Sandberg [Wed, 26 Sep 2018 23:20:05 +0000 (16:20 -0700)]
Docs: adding another fix to the 3.0.12 release notes

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
11 months agoLP#1786987: Locale-less org tree cache object becomes stale
Mike Rylander [Mon, 27 Aug 2018 16:08:37 +0000 (12:08 -0400)]
LP#1786987: Locale-less org tree cache object becomes stale

The autogen.sh script calls a function that flushes all org tree objects
cached by locale, but does not flush the one used when the locale is
unkown.  This commit forces that flushing to occur.

berick: Definition of my $cache pushed up above first use.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Bill Erickson <berickxx@gmail.com>
11 months agoDocs: Adding 3.1.6 release notes
Jane Sandberg [Wed, 26 Sep 2018 16:10:22 +0000 (09:10 -0700)]
Docs: Adding 3.1.6 release notes

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
11 months agoDocs: Adding release notes for 3.0.12
Jane Sandberg [Wed, 26 Sep 2018 16:05:54 +0000 (09:05 -0700)]
Docs: Adding release notes for 3.0.12

Signed-off-by: Jane Sandberg <sandbej@linnbenton.edu>
11 months agoLP#1794176 Avoid capturing grid cell tooltip/display values
Bill Erickson [Mon, 24 Sep 2018 20:19:33 +0000 (16:19 -0400)]
LP#1794176 Avoid capturing grid cell tooltip/display values

Remove the grid-tooltip logic that captured the cell content into a
template-level variable so the content only needed to be generated once
for both the tooltip and cell display.  This logic fails to handle cases
where the cell content is dynamic, typically the result of row
attributes being modified via external process.

Signed-off-by: Bill Erickson <berickxx@gmail.com>
Signed-off-by: Dan Wells <dbw2@calvin.edu>
12 months agoLP#1791335: Retain stat cats on item transfer
Mike Rylander [Wed, 19 Sep 2018 15:16:39 +0000 (11:16 -0400)]
LP#1791335: Retain stat cats on item transfer

For some reason, parts were protected during item transfer, but stat cats were
not.  This commit protects them by fleshing stat cat entries in the outer
item transfer method.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Bill Erickson <berickxx@gmail.com>
12 months agoLP#1791340: expand on comment about backdated checkin times
Galen Charlton [Fri, 21 Sep 2018 20:46:17 +0000 (16:46 -0400)]
LP#1791340: expand on comment about backdated checkin times

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
12 months agoLP#1791340 Webstaff: Don't backdate when we're not
Dan Wells [Fri, 21 Sep 2018 14:45:59 +0000 (10:45 -0400)]
LP#1791340 Webstaff: Don't backdate when we're not

There was code in the webstaff checkin interface which attempted to
remove the backdate parameter when it wasn't needed, as its mere
presence has a negative effect on the checkin process.  This fail-safe
was not working, however.

Instead, let's build on the same check function used for the display,
so we can be more sure that if the user doesn't see that they are
backdating, the interface will not treat it as a backdate, and
vice-versa.

Signed-off-by: Dan Wells <dbw2@calvin.edu>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
12 months agoLP#1745427: account for change in prediction patterns
Galen Charlton [Thu, 20 Sep 2018 22:26:47 +0000 (18:26 -0400)]
LP#1745427: account for change in prediction patterns

This patch fixes a bug in the web staff client where changing
the active prediction pattern for a subscription would not
reset the base issue when predicting the next run of issues.

To test
-------
1. Set up a subscription in the web staff client with a prediction
   pattern (e.g., monthly).  Predict some issues.
2. Create/select a new prediction pattern for a new publishing schedule,
   e.g., quarterly.
3. Activate the new pattern and deactivate the old pattern.
4. Click Predict New Issues.
5. Enter in the new publication date/enumerations/chronology as needed.
6. Enter a prediction count and select Save. Note that new issues
   appear to be based on the previous pattern.
7. Apply the patch, delete the issues created in step 6, then repeat
   steps 4-6.  This time, new issues should be created using the new
   prediction pattern.

Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Mike Rylander <mrylander@gmail.com>
12 months agoLP#1781480: Include group owner ancestor badges
Mike Rylander [Wed, 19 Sep 2018 14:26:04 +0000 (10:26 -0400)]
LP#1781480: Include group owner ancestor badges

This commit lightly refactors the badge org logic and includes the ancestors
of location group owners in the list of badge orgs, instead of only the direct
owners.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Jeanette Lundgren <jlundgren@cwmars.org>
Signed-off-by: Jason Stephenson <jason@sigio.com>
12 months agoLP#1781480: Closures remeber values in subtle ways...
Mike Rylander [Mon, 17 Sep 2018 15:33:29 +0000 (11:33 -0400)]
LP#1781480: Closures remeber values in subtle ways...

... and we must take care to avoid that.  This commit forces a state variable
to be statically assigned an empty list rather than depending on the idiomatic
undef to vivicate an empty list.  This is important for all OpenSRF methods,
and manifests here as a search "remembering" a previously chosen location
group.  A comment to that point is included for our future selves.

The core probably arises from the fact that, in the end, OpenSRF methods are
generated closures.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Jeanette Lundgren <jlundgren@cwmars.org>
Signed-off-by: Jason Stephenson <jason@sigio.com>
12 months agoLP#1732761: Chain the promises to avoid races
Mike Rylander [Fri, 3 Aug 2018 21:25:33 +0000 (17:25 -0400)]
LP#1732761: Chain the promises to avoid races

It looks like there's a race condition gathering locations for larger copy
sets.  Here we chain the promises to remove the race by serialization.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Kathy Lussier <klussier@masslnc.org>
12 months agoLP#1732761: Fetch locations immediately for display
Mike Rylander [Mon, 9 Jul 2018 20:31:50 +0000 (16:31 -0400)]
LP#1732761: Fetch locations immediately for display

This commit closes a race condition where location labels cannot be rendered
for the "multiple locations" widget because fetching them takes longer than
the initial render of the attribute editor.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Kathy Lussier <klussier@masslnc.org>
12 months agoLP#1732761: Batch item edit and multiple values per field
Mike Rylander [Tue, 3 Jul 2018 20:57:27 +0000 (16:57 -0400)]
LP#1732761: Batch item edit and multiple values per field

Previous to this commit, the display of multiple different values for a field
in the item attribute editor was simply to display no value.  Here we add a UI
component that presents the list of unique values, the number of selected
copies that use each value, and the ability to select just those copies using
a particular value by clicking on the desired value.

Signed-off-by: Mike Rylander <mrylander@gmail.com>
Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Conflicts:
Open-ILS/src/templates/staff/cat/volcopy/index.tt2

12 months agoLP#1783345: Make one more change in case
Kathy Lussier [Thu, 20 Sep 2018 14:05:28 +0000 (10:05 -0400)]
LP#1783345: Make one more change in case

One button was missed when normalizing case in the add to bucket modal.

Signed-off-by: Kathy Lussier <klussier@masslnc.org>
12 months agoBug #1783345 - Normalized add to bucket modal
Sam Link [Tue, 31 Jul 2018 14:35:34 +0000 (10:35 -0400)]
Bug #1783345 - Normalized add to bucket modal

The text cases in the add to bucket modal have been normalized to
sentence case.

Signed-off-by: Kathy Lussier <klussier@masslnc.org>
12 months agoLP#1787274: Stamping upgrade script for no dupe transits
Kathy Lussier [Tue, 18 Sep 2018 18:53:47 +0000 (14:53 -0400)]
LP#1787274: Stamping upgrade script for no dupe transits

Signed-off-by: Kathy Lussier <klussier@masslnc.org>
Conflicts:
Open-ILS/src/sql/Pg/002.schema.config.sql